Wax Marble Polishing in Delhi NCR
Wax polishing gives a quick, warm sheen on stone, mosaic and tile floors, and it is the right finish where a hard crystallised surface would be too slippery or too expensive to maintain. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection and test patch on a hidden area
- Acid-proof masking of walls, skirting and fittings
- Damage correction by grinding where required
- Progressive diamond polishing at controlled speed
At a glance
- 12 years experience
- 600+ projects a year
- Written rates
A real before and after photo is added here for the strongest result.
What is included in wax marble polishing
- Acid-proof masking of walls, skirting and fittings
- Damage correction by grinding where required
- Progressive diamond polishing at controlled speed
- Grey mop haze and residue stripping
- Stain treatment for tea, oil and hard water
- Optional sealer, silicate or nano coating
- Gloss and whiteness checked with you
- Free inspection and test patch on a hidden area
What each surface needs
| Problem | Cause | Fix |
|---|---|---|
| Grey overall haze | Mop residue and soap film | Strip, then polish |
| Dull traffic lanes | Surface wear in walkways | Diamond polish those lanes to match |
| Yellow or brown patches | Oil, rust or water seepage | Poultice, then polish |
| White etch marks | Acid or lemon contact | Fine grind and re-polish |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and test patch (free)
- Masking with acid-proof covering
- Residue stripping and stain treatment
- Progressive diamond polishing
- Handover with a whiteness comparison
Wax Marble Polishing rates in Delhi NCR
| Work | Guide band | Typical case |
|---|---|---|
| Maintenance polish | Rs 5-15 per sq ft | Light dulling |
| Diamond polish | Rs 15-25 per sq ft | Haze and scratch lanes |
| Deep polish with correction | Rs 25-35 per sq ft | Etching, patches, heavy wear |
| Sealer or coating | Quoted after inspection | Kitchens, entries |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Booking, access and scheduling
- Inspection booked within 24-48 hours; the written quote follows the same visit
- Work usually starts within a week of approval, sooner if you are flexible on dates
- Society gate, lift, parking and working-hour rules arranged before the crew arrives
- Water point, power and work area confirmed at booking so setup takes minutes
- Occupied premises are done room by room or after hours, at no surprise premium
| Job size | Typical duration |
|---|---|
| Bathroom or kitchen | Same day |
| Single room | One working day |
| Full 2-3 BHK | One to two days |
| Lobby or commercial floor | Phased, often overnight |
Machines are matched to the job. A 400 mm single-disc machine for open floors, edge machines for skirtings and staircases, and hand blocks for corners and thresholds where a machine cannot safely reach.
Waste is removed the same day. Slurry, stripped residue, used pads and packaging leave with the crew instead of going into society bins or being left for you to dispose of.
Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.
Why clients book us
- Whiteness and gloss compared before and after
- Crystallisation, silicate and nano options offered honestly
- 12 years of white marble work in Delhi NCR
- No acid on calcite stone at any stage
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Wax Marble Polishing - common questions
Why does white marble go grey?
Almost always residue and wear, not the stone itself. Soap film, mop haze and surface scratches scatter light, which reads as grey. Stripping and polishing restores the original tone.
Can yellow stains be removed?
Surface yellowing from polish residue or hard water lifts during polishing. Yellowing caused by water seepage from below, or inside a resin-filled slab, cannot be polished out, and we test a patch to show you which type you have.
Will polishing make it whiter than new?
No. It restores the stone to its clean colour by removing the dulled and stained top layer. We compare whiteness before and after so you can see the real change.
How do I keep it white afterwards?
Use only pH-neutral cleaner with clean water, never acid or bleach, and dry promptly. Sealing in entry areas helps stop grime soaking into the surface.
How far in advance should I book?
A week is comfortable. During festival and wedding season, two weeks is safer because crews are booked out for hotel and banquet work.
What access do you need?
A water point, a working power socket, and a clear route for the machines. Society permission for lift use is helpful for upper floors.
Can the job be split across weekends?
Yes. Many clients do one or two rooms each weekend. We keep the same rate per sq ft and you are not billed twice for travel within the same batch.