Diamond Polishing on Marble in Delhi NCR
Diamond polishing cuts the stone itself with graded diamond pads, so the shine comes out of the marble instead of sitting on top of it. That is the difference between a floor that still looks good after a year and one that goes patchy in three months, the way wax and cream polishes do. SR Marble Polishing Solutions has run diamond polishing on marble, granite and Kota stone for 12 years across Gurgaon and Delhi NCR, working from 60 grit up to 3000 grit in one continuous sequence.
- Free gloss reading before we quote
- Grit-matched pads for your stone, not one set for all
- No wax, no cream polish, no temporary shine
- Gloss checked with you at handover
Same 600 sq ft floor before diamond polishing and after a 60–3000 grit sequence.
What each grit stage actually does
| Grit | Job it does | When it is needed |
|---|---|---|
| 60 & 100 | Cuts back lippage, deep scratches and rough patches | Uneven joints, heavy damage |
| 200 & 400 | Removes grinding marks and levels the surface | After any coarse stage |
| 800 | Closes the pores, prepares the stone for shine | Almost every job |
| 1500 | Brings up the working gloss | Homes, offices |
| 3000 | Final mirror pass on the surface | Lobbies, showrooms, mirror finish |
Skipping stages is the most common shortcut in this trade. It looks fine on day one and shows scratch haze within weeks, which is why we do not jump from 200 straight to polishing.
Diamond polishing against buff and wax
| Buff & wax / cream polish | Diamond polishing | |
|---|---|---|
| What it is | A film layered on top of the stone | Stone surface refined by abrasion |
| First look | Shiny within minutes | Shiny and even, no smear |
| After 2–3 months | Wears off in walking lanes, looks patchy | Still uniform, only dulls gradually |
| Floor wash | Film breaks down with frequent mopping | Unaffected by normal cleaning |
| Best use | Quick touch-up before an event | Real restoration, long-term finish |
What is included
- Gloss reading and damage mapping before starting
- Masking of skirting, walls and furniture edges
- Sequential diamond passes from the grit your floor needs
- Wet working to keep dust down indoors
- Edge and corner work by hand machine
- Optional silicate, epoxy or nano finish
- Grout-line and joint clean-up
- Floor washed, walked through and handed over
How the job runs
- Inspection (free, 20 min): gloss reading, scratch depth and a small test patch.
- Masking (30 min): every surface that should not get slurry is covered.
- Diamond sequence (30–45 min per 100 sq ft): each grit run until the marks of the previous one disappear.
- Finishing pass: 1500 or 3000 grit, then optional coating on your approval.
- Handover: gloss compared with the before reading, care advice for the first week.
Diamond polishing rates in Delhi NCR
| Work | Guide band | Where it applies |
|---|---|---|
| Light diamond pass | ₹5–15 / sq ft | Sound floors, mild dulling |
| Standard diamond polishing | ₹15–25 / sq ft | Scratch lanes, worn gloss |
| Deep diamond sequence + crystallisation | ₹25–35 / sq ft | Lippage, stains, heavy wear |
| Coating after polishing | Quoted after inspection | Silicate, epoxy or nano |
Stone hardness, damage depth, area and access set the rate. [CONFIRM: publish your diamond polishing bands as final.] The rate is written down before the first pad runs.
Why clients choose us for diamond work
- 12 years, 600+ projects a year across Delhi NCR, from single bedrooms to full hotel floors.
- Fresh diamond segments, because worn pads polish slowly and leave swirl marks.
- Correct pad set per stone — marble, granite, Kota and terrazzo each behave differently under the machine.
- One contractor: polishing, grinding, restoration and coatings, so nobody blames the other team.
- [CONFIRM: warranty period, insurance and GST details.]
Where we work and how soon we reach you
Gurgaon, Delhi, Noida, Faridabad and Ghaziabad. Inspections within 24–48 hours; 800–1,000 sq ft of diamond polishing typically finishes in one working day. Call 86070 01043 or WhatsApp a photo of the floor for an indicative rate.
Diamond polishing — common questions
How is diamond polishing different from the polish my housekeeping service does?
Housekeeping applies a cream or wax polish that sits on the surface and wears off in walking lanes within weeks. Diamond polishing uses abrasive diamond pads to refine the stone itself, so the finish is part of the floor and survives normal mopping.
Will diamond polishing remove a lot of marble?
It removes microns of stone, not visible layers. Even a full 60–3000 sequence on a damaged floor only corrects the worn top surface. Coarse grinding is the stage that removes more, and we only use it when lippage or deep damage makes it necessary.
How glossy will the floor look?
Most marble floors reach a near-mirror gloss at 1500–3000 grit. The final reading depends on the stone: Statuario and Makrana take a very high gloss, while honed travertine and some Kota floors look better satin. We agree the target finish before starting.
How long does the finish last?
In homes, 2–3 years before a light maintenance pass is needed. In offices, showrooms and hotels with heavy footfall, expect 8–12 months, or longer if an optional silicate or nano coating is applied.
Can it be done while we live in the house?
Yes. Diamond polishing is done wet, which keeps dust low. We mask furniture and edges, work room by room and leave dry walking paths, so you can stay in the house through the job.