Concrete Floor Polishing in Bangalore
Marble, granite, tile, terrazzo and wooden floors all dull for different reasons, and treating them with the same machine and pads is how floors get damaged. We identify the surface first, then use the sequence that suits it. Bangalore is granite country, so most homes mix granite platforms and staircases with marble or vitrified floors. Hard borewell water leaves scale and white film on stone, which is why descaling is usually part of the job here.
- Gloss reading and scratch inspection
- Correcting damage before the final passes
- Progressive polishing to the finest grit
- Wet working to control heat and dust
At a glance
- One team, all surfaces
- Written rates
- Klindex & Taski
A real before and after photo is added here for the strongest result.
What is included in concrete floor polishing
- Progressive polishing to the finest grit
- Wet working to control heat and dust
- Even pressure across lanes and corners
- Optional crystallisation or nano top coat
- Reflection check with you at handover
- Cleaning advice to protect the gloss
- Gloss reading and scratch inspection
- Correcting damage before the final passes
What each surface needs
| Target finish | Grit reached | Best for |
|---|---|---|
| Satin | 800-1500 | Homes, bedrooms |
| High gloss | 1500 | Living rooms, offices |
| Mirror | 3000 | Lobbies, showrooms |
| Mirror plus crystallisation | 3000 plus treatment | Hotels, high traffic |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and gloss target agreed (free)
- Damage correction by grinding or coarse pads
- Progressive polishing to the agreed grit
- Mirror pass, then optional coating
- Reflection check and handover
Concrete Floor Polishing rates in Bangalore
| Work | Guide band | Typical case |
|---|---|---|
| Polish to high gloss | Rs 15-25 per sq ft | Sound floors |
| Mirror finish with correction | Rs 25-35 per sq ft | Scratched or patchy floors |
| Mirror with crystallisation | Quoted after inspection | Lobbies, hotels |
| Top-up coating | Quoted after inspection | Longer gloss life |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Reading a per sq ft quote correctly
- Ask whether grinding is included or quoted separately, because that is the single biggest swing in the number
- Ask what the rate excludes: coatings, crack filling, slab replacement and waste removal are the usual extras
- Check whether the area is charged on carpet area or built-up area, and whether staircases are priced per step
- Confirm the rate applies to the measured floor, not an estimate from photographs
- Insist on one written figure per surface where floors are mixed
| Rate band | Typical work included |
|---|---|
| Lowest band | Maintenance buff on a sound floor |
| Middle band | Diamond polishing, scratch and lane correction |
| Upper band | Grinding, deep correction, crystallisation or coating |
Two quotes can differ by 40 percent for the same floor simply because one includes grinding and the other does not. Compare the scope, not just the number.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Protection is planned, not improvised. Furniture is moved to one side and covered, curtain hems are lifted, and a walking route is kept clear throughout so the household can still move around.
Access is confirmed before the visit: parking, lift use, gate entry, working-hour restrictions and any society paperwork. Sorting this in advance is what stops a scheduled job from becoming a wasted trip.
Why clients book us
- 12 years of marble finishing
- Honest about whether your floor can reach mirror gloss
- Damage corrected first, reflections chased second
- Even finish verified with you before handover
Serving Bangalore and nearby areas
Bangalore visits are planned as a batch with machines brought in, so work is booked in advance rather than as same-day calls. Bangalore is granite country, so most homes mix granite platforms and staircases with marble or vitrified floors. Hard borewell water leaves scale and white film on stone, which is why descaling is usually part of the job here. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Concrete Floor Polishing - common questions
Can every marble floor reach mirror gloss?
Not every one. Hard, dense marbles like Statuario and Makrana take a very high gloss. Softer or heavily damaged stone may top out at a satin finish, and we tell you that before you pay for a mirror attempt.
Does a mirror finish show scratches more?
Yes, gloss reveals rather than hides surface damage. That is why correction comes before the final passes.
How long does mirror gloss last?
Eighteen to twenty-four months in homes and eight to twelve months in lobbies, longer with a silicate or nano coating.
Is a mirror finish slippery?
A mirror surface is smooth when wet. For bathrooms, kitchens and staircases we recommend a satin finish with anti-skid treatment instead.
Why do per sq ft rates differ so much between contractors?
Almost always scope. A rate that excludes grinding, crack filling and coatings looks cheaper until those are added. Ask for the scope in writing and compare the total, not the headline rate.
Is the rate cheaper for larger areas?
Yes. Above roughly 1,000 sq ft we move to slab rates because setup and travel are spread over more work.
How do you measure the area?
On site, with you present, room by room. You see the measurement sheet before the quote is finalised.