Marble Polish in Kolkata
A mixed floor is normal in Kolkata homes: Kota in one room, Italian marble in the living area and vitrified tile in the kitchen. One team can handle all three in the same visit, which also avoids arguments between contractors. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit.
- Gloss reading and scratch inspection
- Correcting damage before the final passes
- Progressive polishing to the finest grit
- Wet working to control heat and dust
At a glance
- One team, all surfaces
- Written rates
- Klindex & Taski
A real before and after photo is added here for the strongest result.
What is included in marble polish
- Wet working to control heat and dust
- Even pressure across lanes and corners
- Optional crystallisation or nano top coat
- Reflection check with you at handover
- Cleaning advice to protect the gloss
- Gloss reading and scratch inspection
- Correcting damage before the final passes
- Progressive polishing to the finest grit
What each surface needs
| Target finish | Grit reached | Best for |
|---|---|---|
| Satin | 800-1500 | Homes, bedrooms |
| High gloss | 1500 | Living rooms, offices |
| Mirror | 3000 | Lobbies, showrooms |
| Mirror plus crystallisation | 3000 plus treatment | Hotels, high traffic |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and gloss target agreed (free)
- Damage correction by grinding or coarse pads
- Progressive polishing to the agreed grit
- Mirror pass, then optional coating
- Reflection check and handover
Marble Polish rates in Kolkata
| Work | Guide band | Typical case |
|---|---|---|
| Polish to high gloss | Rs 15-25 per sq ft | Sound floors |
| Mirror finish with correction | Rs 25-35 per sq ft | Scratched or patchy floors |
| Mirror with crystallisation | Quoted after inspection | Lobbies, hotels |
| Top-up coating | Quoted after inspection | Longer gloss life |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
How our charges are built
| Charge component | What it covers | How it varies |
|---|---|---|
| Rate per sq ft | Cleaning, grinding, polishing, finishing | Surface type and area |
| Damage correction | Scratch, etch and stain treatment | Severity, decided on the test patch |
| Access and edges | Staircases, corners, upper floors | Hand work needed |
| Coatings | Silicate, crystallisation, nano, sealer | Optional, quoted separately |
- Nothing is added mid-job. If we find something the inspection could not show, we stop and re-quote with you
- Material is included in the rate, not billed as an extra
- Slab rates apply above 1,000 sq ft instead of per-room pricing
- One written figure per surface, so a mixed floor is priced line by line
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Protection is planned, not improvised. Furniture is moved to one side and covered, curtain hems are lifted, and a walking route is kept clear throughout so the household can still move around.
Access is confirmed before the visit: parking, lift use, gate entry, working-hour restrictions and any society paperwork. Sorting this in advance is what stops a scheduled job from becoming a wasted trip.
Why clients book us
- Damage corrected first, reflections chased second
- Even finish verified with you before handover
- Silicate, crystallisation and nano options
- 12 years of marble finishing
Serving Kolkata and nearby areas
Kolkata jobs are scheduled as a fixed visit batch so the crew and machines travel together and travel cost is not loaded onto your rate. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit. Inspections are booked within 24-48 hours and most jobs take 1-2 days per flat. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Polish - common questions
Can every marble floor reach mirror gloss?
Not every one. Hard, dense marbles like Statuario and Makrana take a very high gloss. Softer or heavily damaged stone may top out at a satin finish, and we tell you that before you pay for a mirror attempt.
Does a mirror finish show scratches more?
Yes, gloss reveals rather than hides surface damage. That is why correction comes before the final passes.
How long does mirror gloss last?
Eighteen to twenty-four months in homes and eight to twelve months in lobbies, longer with a silicate or nano coating.
Is a mirror finish slippery?
A mirror surface is smooth when wet. For bathrooms, kitchens and staircases we recommend a satin finish with anti-skid treatment instead.
Are there extra charges on top of the quoted rate?
No, provided the scope does not change. The rate covers preparation, products, machines and clean-up. Coatings and slab repairs are the only optional items, and they are listed separately in the written quote.
Do you charge for travel?
Travel is covered within the quoted rate for addresses in our service cities. For outlying areas we tell you the travel component upfront rather than adding it at handover.
What if the work needs more time than estimated?
That is our risk, not yours. The rate is per sq ft for the agreed scope, so a slow patch or a stubborn stain does not increase your bill.