Marble Floor Repair Polishing in Kolkata
Marble, granite, tile, terrazzo and wooden floors all dull for different reasons, and treating them with the same machine and pads is how floors get damaged. We identify the surface first, then use the sequence that suits it. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit.
- Photographed damage map and gloss reading
- Test patch on a hidden area before full approval
- Acid-proof masking of skirting, walls and fittings
- Sequential diamond passes at controlled speed
At a glance
- One team, all surfaces
- Written rates
- Klindex & Taski
A real before and after photo is added here for the strongest result.
What is included in marble floor repair polishing
- Photographed damage map and gloss reading
- Test patch on a hidden area before full approval
- Acid-proof masking of skirting, walls and fittings
- Sequential diamond passes at controlled speed
- Vein-safe polishing and hand-finished edges
- pH-neutral deep clean before finishing
- Sealer, silicate or nano coating on request
- Written after-care rules for the first month
What each surface needs
| Marble | Character | What to watch for |
|---|---|---|
| Statuario | White with bold grey veining | Etches fast, needs prompt spill control |
| Carrara | Soft white, subtle grey | Softer stone, dulls quickly in entries |
| Calacatta | Warm white with gold veins | Needs gentle pads to avoid vein bleeding |
| Perlatino and Botticino | Warm beige with fine veins | Yellowing if filled slabs are over-polished |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Identify the marble type and check for resin filling (free)
- Masking with acid-proof covering
- Diamond passes at controlled speed, 30-45 minutes per 100 sq ft
- Polish to the agreed gloss, then seal or coat if required
- Before and after comparison plus a list of products never to use
Marble Floor Repair Polishing rates in Kolkata
| Work | Guide band | Typical case |
|---|---|---|
| Maintenance polish | Rs 5-15 per sq ft | Light dulling, sound floor |
| Diamond polish to restore gloss | Rs 15-25 per sq ft | Traffic lanes, mop haze |
| Deep polish with crystallisation | Rs 25-35 per sq ft | Heavy wear, etching, patchiness |
| Sealing or nano coating | Quoted after inspection | Kitchens, entries, high traffic |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
What changes the price for marble floor repair polishing in Kolkata
| Factor | Effect on rate | What to expect |
|---|---|---|
| Total area | Bigger areas cost less per sq ft | Slab rates above 1,000 sq ft |
| Damage depth | Grinding raises the rate | Decided by the test patch |
| Stone type | Imported and filled slabs take longer | See the surface table |
| Access | Upper floors and corners take longer | Confirmed before booking |
Ask for one written rate per surface. A single number for the whole house without an inspection always changes later.
Booking, access and scheduling
- Inspection booked within 24-48 hours; the written quote follows the same visit
- Work usually starts within a week of approval, sooner if you are flexible on dates
- Society gate, lift, parking and working-hour rules arranged before the crew arrives
- Water point, power and work area confirmed at booking so setup takes minutes
- Occupied premises are done room by room or after hours, at no surprise premium
| Job size | Typical duration |
|---|---|
| Bathroom or kitchen | Same day |
| Single room | One working day |
| Full 2-3 BHK | One to two days |
| Lobby or commercial floor | Phased, often overnight |
Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.
Water and power are the two site requirements. We need one working socket within reach of a lead and a water point; everything else, including masking material and waste bags, comes with the crew.
Payment terms are stated upfront: advances apply only where material has to be bought for a large job, and the balance is settled after the walkthrough so you are never paying for work you have not seen.
Why clients book us
- Lower heat and pressure on resin-filled slabs to prevent yellowing
- One gloss standard across the whole floor, no patch looks newer
- Silicate, epoxy and Akemi nano products in stock
- 12 years including villa, hotel and showroom projects
Serving Kolkata and nearby areas
Kolkata jobs are scheduled as a fixed visit batch so the crew and machines travel together and travel cost is not loaded onto your rate. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit. Inspections are booked within 24-48 hours and most jobs take 1-2 days per flat. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Floor Repair Polishing - common questions
Will polishing change the pattern?
No. Diamond polishing removes the damaged top layer; it does not bleach or alter the veining. On filled slabs we work at lower speed specifically to avoid yellowing.
Can yellowed Italian marble be corrected?
Polish residue and hard-water film lift during diamond polishing. Yellowing inside a filled slab is internal and cannot be polished out, so we test a patch and tell you the realistic outcome first.
How often does it need polishing?
Homes every 18-24 months with neutral cleaning. Lobbies, showrooms and entries every 8-12 months, longer with a sealer or nano coating.
Is a sealer worth it?
Yes in working areas. It slows absorption of oil, tea and coloured liquids, which buys time to wipe a spill, and needs refreshing every 12-24 months.
Why does Italian marble dull faster than Indian marble?
It is usually the cleaning, not the stone. White imported marbles are calcium-based, so acidic cleaners and lemon juice etch the surface and leave white patches within days. A pH-neutral cleaner and clean-water mopping solves most of it.
Is the price negotiable?
The rate per sq ft is not inflated to leave room for haggling. We scope honestly: if the floor needs only a buff, we quote a buff instead of a full diamond job, and tell you when the cheaper option will hold.
Do you take advance payment?
The package is confirmed in writing first. Advance for material is normal on large jobs; the balance is settled after the walkthrough.
How far in advance should I book?
A week is comfortable. During festival and wedding season, two weeks is safer because crews are booked out for hotel and banquet work.
What access do you need?
A water point, a working power socket, and a clear route for the machines. Society permission for lift use is helpful for upper floors.
Can the job be split across weekends?
Yes. Many clients do one or two rooms each weekend. We keep the same rate per sq ft and you are not billed twice for travel within the same batch.