Floor Polishing Services in Kolkata
A mixed floor is normal in Kolkata homes: Kota in one room, Italian marble in the living area and vitrified tile in the kitchen. One team can handle all three in the same visit, which also avoids arguments between contractors. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit.
- Gloss reading and patchiness mapping
- Diamond polishing to prepare the surface
- Crystallisation applied in sections with a steel-wool pad under machine
- Even working to avoid swirl marks
At a glance
- One team, all surfaces
- Written rates
- Klindex & Taski
A real before and after photo is added here for the strongest result.
What is included in floor polishing
- Gloss reading and patchiness mapping
- Diamond polishing to prepare the surface
- Crystallisation applied in sections with a steel-wool pad under machine
- Even working to avoid swirl marks
- Second pass on high-traffic routes
- Residue buffed off and floor washed
- Walkway protection until dry
- Gloss check with you
What each surface needs
| Area | Why crystallise | Expected life |
|---|---|---|
| Lobby and reception | Constant footfall and trolley traffic | 12-24 months |
| Showroom and retail | Scuffing and display lighting | 12-18 months |
| Staircases | Edge wear and heel marks | 12-18 months |
| Homes with pets | Claw marks and repeated mopping | 18-24 months |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and gloss reading (free)
- Diamond polishing to level the surface
- Crystallisation worked in section by section
- Second pass on heavy-traffic lanes
- Residue removal, wash-down and handover
Floor Polishing rates in Kolkata
| Work | Guide band | Notes |
|---|---|---|
| Polish plus light crystallisation | Rs 15-25 per sq ft | Homes, moderate traffic |
| Full crystallisation with deep polish | Rs 25-35 per sq ft | Lobbies, showrooms, heavy traffic |
| Crystallisation only | Quoted after inspection | Floor must already be sound |
| Repeat maintenance | Quoted after inspection | 12-24 months |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
What changes the price for floor polishing in Kolkata
| Factor | Effect on rate | What to expect |
|---|---|---|
| Total area | Bigger areas cost less per sq ft | Slab rates above 1,000 sq ft |
| Damage depth | Grinding raises the rate | Decided by the test patch |
| Stone type | Imported and filled slabs take longer | See the surface table |
| Access | Upper floors and corners take longer | Confirmed before booking |
Ask for one written rate per surface. A single number for the whole house without an inspection always changes later.
Booking, access and scheduling
- Inspection booked within 24-48 hours; the written quote follows the same visit
- Work usually starts within a week of approval, sooner if you are flexible on dates
- Society gate, lift, parking and working-hour rules arranged before the crew arrives
- Water point, power and work area confirmed at booking so setup takes minutes
- Occupied premises are done room by room or after hours, at no surprise premium
| Job size | Typical duration |
|---|---|
| Bathroom or kitchen | Same day |
| Single room | One working day |
| Full 2-3 BHK | One to two days |
| Lobby or commercial floor | Phased, often overnight |
Access is confirmed before the visit: parking, lift use, gate entry, working-hour restrictions and any society paperwork. Sorting this in advance is what stops a scheduled job from becoming a wasted trip.
Old polish, wax and cleaning residue are stripped before any new finish goes on. Layering a fresh treatment over residue is what makes floors look grey again within weeks.
Water and power are the two site requirements. We need one working socket within reach of a lead and a water point; everything else, including masking material and waste bags, comes with the crew.
Why clients book us
- Swirl marks removed before handover
- Suitable for marble, terrazzo and most calcite stone
- Honest advice when a floor is too damaged for crystallisation alone
- 12 years of marble finishing
Serving Kolkata and nearby areas
Kolkata jobs are scheduled as a fixed visit batch so the crew and machines travel together and travel cost is not loaded onto your rate. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit. Inspections are booked within 24-48 hours and most jobs take 1-2 days per flat. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Floor Polishing - common questions
Will it make the floor slippery?
A crystallised surface is smooth and reflective, so wet areas need care. In bathrooms and on stairs we recommend a satin finish with anti-skid treatment instead.
How long does it last?
Twelve to twenty-four months depending on traffic. Lobbies are usually re-treated annually, homes every two years.
Can it be done on a scratched floor?
It should not be. Crystallising a scratched surface sets the scratches in. We polish first, and if the damage is deep we recommend grinding.
What is the difference between crystallisation and silicate?
Crystallisation builds a harder, glassier surface layer and suits heavy footfall. Silicate gives a wetter, deeper gloss and is gentler on the stone. Many projects use silicate for homes and crystallisation for lobbies.
Is the price negotiable?
The rate per sq ft is not inflated to leave room for haggling. We scope honestly: if the floor needs only a buff, we quote a buff instead of a full diamond job, and tell you when the cheaper option will hold.
Do you take advance payment?
The package is confirmed in writing first. Advance for material is normal on large jobs; the balance is settled after the walkthrough.
How far in advance should I book?
A week is comfortable. During festival and wedding season, two weeks is safer because crews are booked out for hotel and banquet work.
What access do you need?
A water point, a working power socket, and a clear route for the machines. Society permission for lift use is helpful for upper floors.
Can the job be split across weekends?
Yes. Many clients do one or two rooms each weekend. We keep the same rate per sq ft and you are not billed twice for travel within the same batch.