Wood Floor Polishing in Delhi NCR
A wooden floor does not fade from use alone; it dries out in summer and swells in the monsoon, and the finish wears in the walking lanes first. Sanding back to bare wood, filling the gaps and rebuilding the surface is what brings it back. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection and test patch
- Masking of walls, skirting and furniture edges
- Wet sanding through the grit sequence
- Slurry vacuumed as work proceeds
At a glance
- Dust-controlled
- Gap filling
- PU / melamine / oil
A real before and after photo is added here for the strongest result.
What is included in wood floor polishing company
- Free inspection and test patch
- Masking of walls, skirting and furniture edges
- Wet sanding through the grit sequence
- Slurry vacuumed as work proceeds
- Damage and joint treatment where found
- Polishing after sanding on request
- Wash-down of the whole area
- Care advice for the first week
What each surface needs
| Problem | Wet sanding effect | Outcome |
|---|---|---|
| Grey mop haze | Strips the residue layer | True stone colour returns |
| Old wax and coatings | Fully removed | Surface ready for polish |
| Light scratches | Ground out in stages | Even surface |
| Paint, POP and cement spots | Removed without acid | Clean stone |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and test patch (free)
- Masking and water containment
- Wet sanding in grit stages
- Slurry vacuumed and area washed
- Handover with finish options
Wood Floor Polishing Company rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Wet sanding only | Rs 5-15 per sq ft | Residue removal |
| Wet sanding plus polishing | Rs 15-25 per sq ft | Dull floors |
| Sanding, grinding and polish | Rs 25-35 per sq ft | Damage and lippage |
| Coating after sanding | Quoted after inspection | Protection |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Tiles or marble: what each one needs
| Tiles (vitrified, ceramic) | Marble | |
|---|---|---|
| What dulls | Surface residue and micro-scratches | Worn polished layer, etching |
| Restoring it | Deep clean, surface refine | Grinding and diamond polishing |
| Staining | Grout lines first | Stone surface and joints |
| Slip risk | High on glossy tile when wet | High on mirror-polished stone |
| Best finish for wet areas | Clean plus anti-skid | Satin plus anti-skid |
In most homes both are present in the same flat, which is why we quote surface by surface instead of giving one blended rate.
Nothing is hidden behind a shine. Where a surface has damage that polishing cannot correct, we mark it during inspection and put it in writing, so expectations are set before work starts rather than argued over afterwards.
Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.
Protection is planned, not improvised. Furniture is moved to one side and covered, curtain hems are lifted, and a walking route is kept clear throughout so the household can still move around.
Why clients book us
- Test patch shown before the full job
- One team for sanding, grinding and polishing
- 12 years of marble work in Delhi NCR
- Wet method keeps dust out of the house
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Wood Floor Polishing Company - common questions
Why wet sanding instead of dry?
Because dust control matters in occupied homes. Water carries the residue away and keeps the surface cool, which protects the stone from heat marks.
Does wet sanding remove a lot of stone?
It removes the coating and the damaged top layer only. Deep lippage needs grinding first, which we identify during inspection.
How messy is it?
We mask surfaces and vacuum slurry as we work, then wash the area before handover. Your furniture and curtains do not end up coated in dust.
Can it be done room by room?
Yes. Most clients do one or two rooms at a time, and dry paths are kept so the house stays usable.
Can tiles be polished like marble?
Tiles are refined and cleaned, not ground like stone. Polishing a vitrified tile past its factory finish wears the surface, so we clean and seal instead, or polish only where the tile type allows it.
Which is better for a bathroom floor?
Neither should be mirror-glossy when wet. Tile with anti-skid treatment, or honed stone with anti-skid, is the safer and more practical choice.
Do floors with both need separate visits?
No. One crew handles tiles, grout and stone in the same visit, which also avoids the joint line between two trades becoming anyone's excuse.