Terranova Marble Polishing in Delhi NCR
Cleaning and polishing are two different jobs. A floor can be clean and still look grey because the sheen is gone, and it can be shiny and still be dirty if residue has been sealed in. We do both, in the right order. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection including slab-thickness and hollow check
- Masking and furniture protection
- Grinding where lippage or deep scratches exist
- Graded diamond polishing to the stone hardness
At a glance
- pH-neutral products
- Residue stripping
- Polishing included
A real before and after photo is added here for the strongest result.
What is included in terranova marble polishing
- Grinding where lippage or deep scratches exist
- Graded diamond polishing to the stone hardness
- Old polish and wax residue removal
- Stain treatment for oil, rust and hard water
- Silicate or crystallisation option
- Wash-down and walkthrough
- Free inspection including slab-thickness and hollow check
- Masking and furniture protection
What each surface needs
| Stone | Hardness | Best finish |
|---|---|---|
| Makrana white | Medium-hard, takes high gloss | Mirror gloss |
| Katni and Jaisalmer | Softer, colour sensitive | Satin to medium gloss |
| Rajnagar and green marble | Hard, banded | Gloss with even banding |
| Kota and other flagstone | Hard, matte by nature | Densified gloss or matte |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and slab check (free)
- Masking and preparation
- Grinding if lippage or residue is present
- Diamond polishing matched to stone hardness
- Handover with gloss check and care advice
Terranova Marble Polishing rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Buff and polish | Rs 5-15 per sq ft | Light dullness |
| Diamond polishing | Rs 15-25 per sq ft | Scratches, dull lanes |
| Grinding plus deep polish | Rs 25-35 per sq ft | Lippage, heavy wear |
| Silicate or coating | Quoted after inspection | Longer gloss life |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Booking, access and scheduling
- Inspection booked within 24-48 hours; the written quote follows the same visit
- Work usually starts within a week of approval, sooner if you are flexible on dates
- Society gate, lift, parking and working-hour rules arranged before the crew arrives
- Water point, power and work area confirmed at booking so setup takes minutes
- Occupied premises are done room by room or after hours, at no surprise premium
| Job size | Typical duration |
|---|---|
| Bathroom or kitchen | Same day |
| Single room | One working day |
| Full 2-3 BHK | One to two days |
| Lobby or commercial floor | Phased, often overnight |
Machines are matched to the job. A 400 mm single-disc machine for open floors, edge machines for skirtings and staircases, and hand blocks for corners and thresholds where a machine cannot safely reach.
Waste is removed the same day. Slurry, stripped residue, used pads and packaging leave with the crew instead of going into society bins or being left for you to dispose of.
Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.
Why clients book us
- Slab thickness and hollowness checked before any grinding
- Residue stripped so the new finish bonds to stone, not to old wax
- Correct grit sequence per stone hardness
- One team for grinding, polishing and sealing
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Terranova Marble Polishing - common questions
Can old polish and wax be removed?
Yes. Grinding strips the residue layer completely. That is the only way a new polish bonds to the stone instead of sitting on top of old compound.
Will grinding change the colour of my floor?
It restores the original colour by removing the worn and stained top layer. Floors that have faded unevenly across rooms come back to one uniform shade.
How long does it take?
Most apartments are ground and polished in one to two days, and the floor is walkable the same evening as the final pass.
Do you polish Makrana that has gone grey?
Yes. Greyness is normally surface dirt, mop haze and worn polish. It lifts with grinding and polishing, and we show you a test patch on a hidden corner first.
Does Indian marble need the same treatment as Italian marble?
No. Indian marbles such as Makrana, Katni and Rajnagar are generally harder and less acid-sensitive. They take a different grit sequence and more grinding pressure, but the same acid-free cleaning discipline still applies.
How far in advance should I book?
A week is comfortable. During festival and wedding season, two weeks is safer because crews are booked out for hotel and banquet work.
What access do you need?
A water point, a working power socket, and a clear route for the machines. Society permission for lift use is helpful for upper floors.
Can the job be split across weekends?
Yes. Many clients do one or two rooms each weekend. We keep the same rate per sq ft and you are not billed twice for travel within the same batch.