Agaria Marble Polishing in Ashok Vihar
Stone floors collect a layer that mopping cannot remove: cleaning residue, soap film and mineral deposit. It looks like dull stone but it is actually surface build-up, and stripping it is the first step before any polishing. Work in Ashok Vihar is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos.
- Free inspection and test patch
- Masking of walls, skirting and furniture edges
- Wet sanding through the grit sequence
- Slurry vacuumed as work proceeds
At a glance
- pH-neutral products
- Residue stripping
- Polishing included
A real before and after photo is added here for the strongest result.
What is included in agaria marble polishing
- Wet sanding through the grit sequence
- Slurry vacuumed as work proceeds
- Damage and joint treatment where found
- Polishing after sanding on request
- Wash-down of the whole area
- Care advice for the first week
- Free inspection and test patch
- Masking of walls, skirting and furniture edges
What each surface needs
| Problem | Wet sanding effect | Outcome |
|---|---|---|
| Grey mop haze | Strips the residue layer | True stone colour returns |
| Old wax and coatings | Fully removed | Surface ready for polish |
| Light scratches | Ground out in stages | Even surface |
| Paint, POP and cement spots | Removed without acid | Clean stone |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and test patch (free)
- Masking and water containment
- Wet sanding in grit stages
- Slurry vacuumed and area washed
- Handover with finish options
Agaria Marble Polishing rates in Ashok Vihar
| Work | Guide band | Notes |
|---|---|---|
| Wet sanding only | Rs 5-15 per sq ft | Residue removal |
| Wet sanding plus polishing | Rs 15-25 per sq ft | Dull floors |
| Sanding, grinding and polish | Rs 25-35 per sq ft | Damage and lippage |
| Coating after sanding | Quoted after inspection | Protection |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Booking, access and scheduling
- Inspection booked within 24-48 hours; the written quote follows the same visit
- Work usually starts within a week of approval, sooner if you are flexible on dates
- Society gate, lift, parking and working-hour rules arranged before the crew arrives
- Water point, power and work area confirmed at booking so setup takes minutes
- Occupied premises are done room by room or after hours, at no surprise premium
| Job size | Typical duration |
|---|---|
| Bathroom or kitchen | Same day |
| Single room | One working day |
| Full 2-3 BHK | One to two days |
| Lobby or commercial floor | Phased, often overnight |
Nothing is hidden behind a shine. Where a surface has damage that polishing cannot correct, we mark it during inspection and put it in writing, so expectations are set before work starts rather than argued over afterwards.
Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.
Protection is planned, not improvised. Furniture is moved to one side and covered, curtain hems are lifted, and a walking route is kept clear throughout so the household can still move around.
Why clients book us
- Test patch shown before the full job
- One team for sanding, grinding and polishing
- 12 years of marble work
- Wet method keeps dust out of the house
Serving Ashok Vihar and nearby areas
Ashok Vihar jobs are booked as a fixed visit batch, so travel is planned into the date instead of being added as a surprise. Work in Ashok Vihar is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Agaria Marble Polishing - common questions
Does wet sanding remove a lot of stone?
It removes the coating and the damaged top layer only. Deep lippage needs grinding first, which we identify during inspection.
How messy is it?
We mask surfaces and vacuum slurry as we work, then wash the area before handover. Your furniture and curtains do not end up coated in dust.
Can it be done room by room?
Yes. Most clients do one or two rooms at a time, and dry paths are kept so the house stays usable.
Why wet sanding instead of dry?
Because dust control matters in occupied homes. Water carries the residue away and keeps the surface cool, which protects the stone from heat marks.
How far in advance should I book?
A week is comfortable. During festival and wedding season, two weeks is safer because crews are booked out for hotel and banquet work.
What access do you need?
A water point, a working power socket, and a clear route for the machines. Society permission for lift use is helpful for upper floors.
Can the job be split across weekends?
Yes. Many clients do one or two rooms each weekend. We keep the same rate per sq ft and you are not billed twice for travel within the same batch.