Stone Floor Polishing in Delhi NCR
A mixed floor is normal in Delhi NCR homes: Kota in one room, Italian marble in the living area and vitrified tile in the kitchen. One team can handle all three in the same visit, which also avoids arguments between contractors. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free slip-risk inspection of wet areas
- Cleaning of soap film and residue first
- Anti-skid application to the tile surface
- Transparent finish that keeps tile colour
At a glance
- One team, all surfaces
- Written rates
- Klindex & Taski
A real before and after photo is added here for the strongest result.
What is included in stone floor polishing
- Anti-skid application to the tile surface
- Transparent finish that keeps tile colour
- Drainage slope re-checked so water still flows
- Treatment on stairs, ramps and balcony edges
- Wet slip test with you before handover
- Re-application schedule explained
- Free slip-risk inspection of wet areas
- Cleaning of soap film and residue first
What each surface needs
| Area | Why it matters | Re-apply |
|---|---|---|
| Bathroom floor | Soap and water on smooth tile | Every 12-18 months |
| Staircase treads | Highest slip risk in the house | Every 12 months |
| Balcony and terrace | Monsoon film and algae | Every 12-24 months |
| Ramp and driveway slope | Water running down | Every 12 months |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Slip-risk inspection and cleaning (free)
- Masking of fittings and walls
- Deep clean of the tile surface
- Anti-skid application, section by section
- Wet slip test and handover
Stone Floor Polishing rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Anti-skid treatment | Per sq ft | Bathrooms, balconies |
| Stairs and ramps | Per sq ft or per step | Edges and nosing |
| Treatment with deep clean | Per sq ft | Soap film removal |
| Re-application | Per sq ft | After 12-24 months |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
The process, step by step
- Site inspection, gloss reading and hidden test patch
- Masking of skirting, fittings, doors and furniture edges
- Residue and old polish stripping where present
- Grinding if lippage or deep damage is found
- Progressive polishing through the grit sequence
- Optional silicate, crystallisation, epoxy or nano finish
- Edge and corner hand work
- Wash-down, walkthrough and care guidance
Each stage is completed on the whole area before the next one starts, so the floor never ends up with a bright patch next to an unfinished section.
Waste is removed the same day. Slurry, stripped residue, used pads and packaging leave with the crew instead of going into society bins or being left for you to dispose of.
Nothing is hidden behind a shine. Where a surface has damage that polishing cannot correct, we mark it during inspection and put it in writing, so expectations are set before work starts rather than argued over afterwards.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Why clients book us
- Transparent finish, tile colour preserved
- Drainage re-checked so water does not pool
- Wet test done with you present
- Used in homes with children and elderly residents
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Stone Floor Polishing - common questions
Does anti-skid treatment change how the tile looks?
No. It is transparent and does not alter colour or pattern. You feel slightly more grip underfoot, which is the point.
Is it better than a rubber mat?
A mat moves, traps water underneath and looks like a temporary fix. Surface treatment covers the whole floor area, including the parts a mat never reaches.
How long does it last?
Twelve to twenty-four months depending on cleaning products and traffic. Strong acid cleaners wear it out faster, so we tell you what to avoid.
Can it be applied on polished marble?
It can, but we usually recommend a satin finish with anti-skid treatment rather than a mirror gloss on wet-area stone, because gloss is inherently slippery when wet.
How long does each step take?
As a guide, preparation is under an hour, grinding runs 25-40 minutes per 100 sq ft, polishing 15-25 minutes, and finishing plus clean-up about an hour. Bigger areas are scheduled over more days.
Can steps be skipped to save money?
Not safely. Skipping grit stages is the most common shortcut and shows up as scratch haze within weeks. If you want to reduce cost, reduce the area covered this cycle, not the process.
Do you work in one room or the whole floor at a time?
Room by room if you are living in, whole floor if the house is empty, which produces a more even finish because lighting and drying are consistent.