Mirror Polishing in Hauz Khas Enclave
Marble, granite, tile, terrazzo and wooden floors all dull for different reasons, and treating them with the same machine and pads is how floors get damaged. We identify the surface first, then use the sequence that suits it. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection of every surface and its condition
- Masking and furniture shifting
- Surface-specific pad and compound selection
- Grinding where lippage or deep damage exists
At a glance
- One team, all surfaces
- Written rates
- Klindex & Taski
A real before and after photo is added here for the strongest result.
What is included in mirror polishing
- Masking and furniture shifting
- Surface-specific pad and compound selection
- Grinding where lippage or deep damage exists
- Polishing to one consistent gloss level
- Stain and residue treatment
- Optional sealing, silicate, crystallisation or nano
- Wash-down and walkthrough
- Free inspection of every surface and its condition
What each surface needs
| Surface | Process | Result |
|---|---|---|
| Marble | Grind, hone, polish | Satin to mirror gloss |
| Granite | Granite pad buff and seal | Deep lustre |
| Tile and vitrified | Scrub, refine, optional seal | Even clean finish |
| Wood | Sanding and PU or oil finish | Restored grain and sheen |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection of all surfaces (free)
- Masking and preparation
- Surface-by-surface cleaning and grinding
- Polishing to the agreed gloss on each surface
- Sealing option and handover
Mirror Polishing rates in Delhi NCR
| Work | Guide band | Typical case |
|---|---|---|
| Buff or maintenance polish | Rs 5-15 per sq ft | Sound floors, light dulling |
| Diamond polishing | Rs 15-25 per sq ft | Scratch lanes, worn gloss |
| Deep polishing with grinding | Rs 25-35 per sq ft | Lippage, stains, heavy wear |
| Coatings | Quoted after inspection | Silicate, crystallisation, nano |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Serving Hauz Khas Enclave
Mirror Polishing in Hauz Khas Enclave is handled on scheduled routes by our Delhi NCR team, so travel is planned rather than added as a surprise.
- Site inspection booked within 24-48 hours for Hauz Khas Enclave addresses
- Society gate, lift and parking permissions coordinated before the crew arrives
- Water point, power and work area confirmed at the time of booking
- Slurry and waste removed the same day, never dumped in the society bins
- Before-and-after photographs of your own Hauz Khas Enclave job handed over for your records
Preparing floors before a sale or rental listing
- Photographs are taken in daylight, so gloss and evenness matter more than in daily use
- Stain and etch marks read as neglect in listing photos and invite price negotiation
- Polishing the whole floor to one gloss level photographs better than patch repairs
- Grout and joint lines are visible in wide shots, so they get cleaned as part of the job
- Photographs of the finished floor can be included in the listing as proof of condition
We schedule pre-sale work around photographer visits and viewings, including early-morning slots so the floor is settled before people walk through.
Timing is agreed before the crew arrives: arrival window, the room sequence and the handover time are confirmed in writing, so nobody is waiting around or guessing when the floor will be free.
Quality is checked twice: once mid-job, when the first section is finished and you can see the achievable gloss, and once at handover when the whole surface should read evenly under daylight and under your own lighting.
Nothing is hidden behind a shine. Where a surface has damage that polishing cannot correct, we mark it during inspection and put it in writing, so expectations are set before work starts rather than argued over afterwards.
Why clients book us
- Rate fixed in writing before work starts
- Klindex and Taski machines with fresh diamond segments
- 12 years of floor work across Delhi NCR, 600+ projects a year
- One crew for marble, granite, tile, terrazzo and wood
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Mirror Polishing - common questions
Can you polish different floor types in one visit?
Yes. We inspect each surface and use its own pad sequence and compounds. Doing them together is also cheaper than booking separate contractors for each room.
How do you decide between buffing, polishing and grinding?
Buffing suits a sound floor with light dullness, polishing handles scratch lanes and worn gloss, and grinding is needed where slabs are uneven or deeply damaged. The free inspection decides which is genuinely required.
Is the rate the same for every surface?
No. Harder and more damaged surfaces take longer, so rates vary by stone type and condition. You get one written rate per surface before we start.
Can we stay in the house while work is going on?
Yes. We work room by room, mask edges and leave dry walking paths, so the house stays usable throughout.
Do you cover Hauz Khas Enclave?
Yes. Hauz Khas Enclave is on our regular route with the Delhi NCR team, and inspections there are usually booked within 24-48 hours. For larger areas we schedule a fixed route day so travel cost is shared.
How soon can work start in Hauz Khas Enclave?
Inspection first, then scheduling. Most Hauz Khas Enclave jobs begin within a week of approval, and single-room works are often earlier if you are flexible on the date.
Is polishing worth it before selling?
It usually is. Floors dominate listing photographs, and a uniform finish reads as a maintained property. Buyers negotiate over visible stains and patchy gloss far more than over the cost of a polish.
How long before viewings should work be done?
Two to three days, so the finish has settled and any coating is fully dry before people walk in with shoes.
Can you do only the rooms that photograph?
We can, though a partly polished house shows an obvious line between rooms. We will tell you honestly where that line will fall.