Real Wood Floor Polishing in Delhi NCR
If your wood floor looks pale in the middle of the room but fine at the edges, the finish has simply worn through in the traffic path. Re-coating that path alone leaves a visible patch, which is why we do the whole room. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Moisture reading and board-soundness check
- Furniture shifting and room masking
- Dust-controlled sanding through the grit sequence
- Gap filling, crack and dent repair
At a glance
- Dust-controlled
- Gap filling
- PU / melamine / oil
A real before and after photo is added here for the strongest result.
What is included in real wood floor polishing
- Moisture reading and board-soundness check
- Furniture shifting and room masking
- Dust-controlled sanding through the grit sequence
- Gap filling, crack and dent repair
- Stain matching on patch repairs
- Two to three finishing coats
- Skirting, staircase and corner hand finishing
- Care sheet for mopping and monsoon humidity
What each surface needs
| Wood type | What we do | Result |
|---|---|---|
| Solid teak, sheesham, oak, walnut | Full sand and refinish, gap filling | Like-new, long finish life |
| Engineered hardwood veneer | Light sand, thin-coat finishing | Even grain, gloss restored |
| Sound floor with worn finish | Buff and re-coat, no sanding | Fresh gloss, one-day job |
| Laminate, vinyl and PVC | Cleaning and surface polish only | Cannot be sanded |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and moisture check (free)
- Masking and dust barriers
- Sanding through the grit sequence
- Gap filling, then two to three coats
- Handover after cure time with a care sheet
Real Wood Floor Polishing rates in Delhi NCR
| Work | Pricing | Typical scope |
|---|---|---|
| Buff and re-coat | Per sq ft | Sound floor, dull surface |
| Sanding plus two coats | Per sq ft | Worn finish, scratches |
| Sanding plus three coats | Per sq ft | Deep scratches, high traffic |
| Gap filling and repairs | Per running ft | Board gaps and cracks |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
What the free inspection actually covers
- Gloss reading on each surface, so we can tell wear from residue
- Damage mapping: scratches, etching, stains, cracks and lippage, marked and photographed
- Slab tapping to find hollow or lifted sections that polishing cannot save
- Measurement room by room, with you present, for the per sq ft calculation
- A hidden test patch so you see the achievable finish before committing
- A written scope listing surfaces, rates, exclusions and optional items
The inspection takes about twenty minutes for a flat and does not obligate you to book. If a competitor quotes without one, ask them what they are basing the number on.
Waste is removed the same day. Slurry, stripped residue, used pads and packaging leave with the crew instead of going into society bins or being left for you to dispose of.
Nothing is hidden behind a shine. Where a surface has damage that polishing cannot correct, we mark it during inspection and put it in writing, so expectations are set before work starts rather than argued over afterwards.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Why clients book us
- 12 years of wood and stone floor work in Delhi NCR
- Dust control as standard so wardrobes and curtains stay clean
- Honest limits: laminate and vinyl cannot be sanded
- Same crew handles mixed marble-and-wood flats
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Real Wood Floor Polishing - common questions
Will sanding fill the house with dust?
We sand with dust control and mask doorways, skirting and furniture. A fine settling of dust nearby is normal in any sanding job, and we wipe the work area before handover.
How long before we can use the floor?
PU and lacquer floors are walkable after 24 hours and ready for furniture after 48. Melamine dries in 12-24 hours. Oil finishes can be walked on almost immediately but need re-oiling twice a year.
How often does a wooden floor need refinishing?
Homes every 6-10 years; offices and cafes every 3-5 years, or sooner if the walking lanes turn pale while the edges still look fine.
Can water stains and swollen boards be fixed?
Light black water marks and grey patches sand out. Boards that have cupped or gone spongy usually need replacing, and we identify those during the free inspection.
Is the inspection really free?
Yes, with no booking obligation. It is also the only way to price honestly, because gloss and damage depth cannot be judged from photographs.
What should I have ready?
Access to every room you want quoted, and ideally a note of what you dislike about the floor: dullness, a specific stain, slipperiness or scratches near a particular door.
Will you tell me if the job is not worth doing?
Yes. If a floor only needs a light buff, or if a slab needs replacing rather than polishing, we say so at the inspection instead of selling the bigger job.