Marble Polishing in Delhi NCR
Cleaning and polishing are two different jobs. A floor can be clean and still look grey because the sheen is gone, and it can be shiny and still be dirty if residue has been sealed in. We do both, in the right order. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection with a residue test
- Masking of skirting and furniture edges
- pH-neutral deep cleaning, no acid
- Residue and soap film stripping
At a glance
- pH-neutral products
- Residue stripping
- Polishing included
A real before and after photo is added here for the strongest result.
What is included in old marble polishing
- Residue and soap film stripping
- Grout-line and edge cleaning
- Stain treatment where present
- Optional polishing if the surface needs it
- Drying and care guidance
- Free inspection with a residue test
- Masking of skirting and furniture edges
- pH-neutral deep cleaning, no acid
What each surface needs
| Test | What it means | Correct job |
|---|---|---|
| Wipes clean, still grey | Surface is worn | Polishing needed |
| Feels tacky or streaky | Residue build-up | Deep cleaning only |
| Local dark patches | Stains | Stain treatment |
| White marks near taps | Hard water scale | De-scale and neutral clean |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and residue test (free)
- Masking and preparation
- pH-neutral deep clean and stripping
- Joint and edge cleaning
- Handover with a cleaning routine for daily care
Old Marble Polishing rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Deep cleaning | Rs 5-15 per sq ft | Residue and soil |
| Deep clean with stain treatment | Rs 15-25 per sq ft | Oil, rust, scale |
| Cleaning plus polishing | Rs 25-35 per sq ft | Worn surface |
| Sealing after cleaning | Quoted after inspection | Optional |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Booking, access and scheduling
- Inspection booked within 24-48 hours; the written quote follows the same visit
- Work usually starts within a week of approval, sooner if you are flexible on dates
- Society gate, lift, parking and working-hour rules arranged before the crew arrives
- Water point, power and work area confirmed at booking so setup takes minutes
- Occupied premises are done room by room or after hours, at no surprise premium
| Job size | Typical duration |
|---|---|
| Bathroom or kitchen | Same day |
| Single room | One working day |
| Full 2-3 BHK | One to two days |
| Lobby or commercial floor | Phased, often overnight |
Every job ends with a walkthrough. You see the gloss reading, the treated patches and the joints before the crew packs up, and the same crew owns any correction needed later.
Machines are matched to the job. A 400 mm single-disc machine for open floors, edge machines for skirtings and staircases, and hand blocks for corners and thresholds where a machine cannot safely reach.
Team composition is consistent: a supervisor plus two machine operators on standard jobs, with additional hands for staircases, multiple floors or tight access. The same supervisor stays with the job start to finish.
Why clients book us
- pH-neutral products on all calcite stone
- Honest advice when cleaning alone is not enough
- Daily-care routine explained at handover
- 12 years of stone cleaning in Delhi NCR
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Old Marble Polishing - common questions
Do I need cleaning or polishing?
Test one patch with a clean damp cloth. If it wipes clean but still looks grey, the surface is worn and needs polishing. If the cloth comes away dirty or the floor is streaky, it needs deep cleaning.
How often should marble be deep cleaned?
Every six to twelve months in homes, and every three to six months in commercial spaces. Daily mopping with the wrong product makes build-up worse, not better.
Which cleaner should we use daily?
A pH-neutral stone cleaner with clean water, and dry the surface afterwards. Acid and abrasive cleaners damage polished marble within a few uses.
Can cleaning remove white patches near taps?
Hard-water scale yes, with a descaling clean. Etch marks caused by acid need light grinding and polishing, which is a different job.
How far in advance should I book?
A week is comfortable. During festival and wedding season, two weeks is safer because crews are booked out for hotel and banquet work.
What access do you need?
A water point, a working power socket, and a clear route for the machines. Society permission for lift use is helpful for upper floors.
Can the job be split across weekends?
Yes. Many clients do one or two rooms each weekend. We keep the same rate per sq ft and you are not billed twice for travel within the same batch.