Marble Floor Polishing Marble Floor Polishing in Delhi NCR
Marble does not fade evenly. Doorways, kitchen entries and stair landings wear first, which is why floors start looking patchy. We polish the whole surface back to one uniform gloss so no room looks newer than the rest. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free on-site gloss and scratch check
- Masking of skirting, walls and furniture edges
- Diamond grinding where scratches or lippage need it
- Progressive honing and fine polishing passes
At a glance
- Diamond polishing
- Stain removal
- Rate locked in writing
A real before and after photo is added here for the strongest result.
What is included in old marble floor polishing
- Progressive honing and fine polishing passes
- Marble-safe stain and film removal (no acid)
- Edge, corner and staircase hand polishing
- Grout-line clean-up and hairline crack fill
- Optional silicate, crystallisation or nano finish
- Full wash-down and walkthrough with you
- After-care guidance for the first week
- Free on-site gloss and scratch check
- Masking of skirting, walls and furniture edges
- Diamond grinding where scratches or lippage need it
What each surface needs
| Stone | What we do | Finish you get |
|---|---|---|
| Italian marble (Statuario, Carrara) | Fine honing and polishing, acid-free | High mirror gloss |
| Makrana and Indian marble | Grinding, stain removal, silicate option | Deep satin to gloss |
| Kota and Katni stone | Level grinding, densifier, buff | Even matte to gloss |
| Terrazzo and mosaic | Ground back to aggregate, then polished | Medium to high gloss |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and gloss reading (free, 20 minutes)
- Masking and furniture shifting (30 minutes)
- Grinding and honing, 25-40 minutes per 100 sq ft
- Polishing and optional sealing, 15-25 minutes per 100 sq ft
- Wash-down, gloss check with you and after-care note
Old Marble Floor Polishing rates in Delhi NCR
| Work | Guide band | Typical case |
|---|---|---|
| Maintenance buff | Rs 5-15 per sq ft | Sound floor, light dulling |
| Diamond polishing | Rs 15-25 per sq ft | Scratch lanes, worn gloss |
| Deep diamond plus crystallisation | Rs 25-35 per sq ft | Heavy wear, stains, lippage |
| Silicate or nano coating | Quoted after inspection | Wet areas, high traffic |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Reading a per sq ft quote correctly
- Ask whether grinding is included or quoted separately, because that is the single biggest swing in the number
- Ask what the rate excludes: coatings, crack filling, slab replacement and waste removal are the usual extras
- Check whether the area is charged on carpet area or built-up area, and whether staircases are priced per step
- Confirm the rate applies to the measured floor, not an estimate from photographs
- Insist on one written figure per surface where floors are mixed
| Rate band | Typical work included |
|---|---|
| Lowest band | Maintenance buff on a sound floor |
| Middle band | Diamond polishing, scratch and lane correction |
| Upper band | Grinding, deep correction, crystallisation or coating |
Two quotes can differ by 40 percent for the same floor simply because one includes grinding and the other does not. Compare the scope, not just the number.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Every job ends with a walkthrough. You see the gloss reading, the treated patches and the joints before the crew packs up, and the same crew owns any correction needed later.
Why clients book us
- 600+ floor projects completed every year
- Klindex and Taski machines with fresh diamond segments
- Quote fixed in writing before the first pad runs
- Silicate Sil200 and Sil800, Epoxy 1005 and Akemi nano in stock
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Old Marble Floor Polishing - common questions
How much does marble floor polishing cost in Delhi NCR?
Guide bands run Rs 5-15 per sq ft for a maintenance buff, Rs 15-25 for diamond polishing and Rs 25-35 for deep diamond work with crystallisation. Stone type, scratch depth, area and access decide your final number, which we confirm in writing after the free inspection.
How long does the job take?
A two-person crew finishes about 800-1,000 sq ft in a working day. Grinding plus polishing on the same area adds roughly half a day. The floor is walkable the same evening.
Will polishing thin my marble?
Polishing removes microns, not millimetres. We test a patch first and step through grits gradually, so only the worn surface layer is corrected and the slab keeps its thickness.
Do you use acid on marble?
Never. Marble is calcium-based, so acid etches it. We clean with pH-neutral products and treat oil, rust and paint stains with poultice instead.
Can we stay in the house during the work?
Yes. Polishing is done wet so dust stays low, furniture edges are masked and we leave dry walking paths overnight.
Why do per sq ft rates differ so much between contractors?
Almost always scope. A rate that excludes grinding, crack filling and coatings looks cheaper until those are added. Ask for the scope in writing and compare the total, not the headline rate.
Is the rate cheaper for larger areas?
Yes. Above roughly 1,000 sq ft we move to slab rates because setup and travel are spread over more work.
How do you measure the area?
On site, with you present, room by room. You see the measurement sheet before the quote is finalised.