Natural Stone Cleaning Stone Floor Cleaning and Polishing in Delhi NCR
Stone floors collect a layer that mopping cannot remove: cleaning residue, soap film and mineral deposit. It looks like dull stone but it is actually surface build-up, and stripping it is the first step before any polishing. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection with a residue test on a hidden patch
- Masking and protection of adjacent surfaces
- Residue and soap film stripping with pH-neutral products
- Deep cleaning of joints and edges
At a glance
- pH-neutral products
- Residue stripping
- Polishing included
A real before and after photo is added here for the strongest result.
What is included in natural stone cleaning services
- Residue and soap film stripping with pH-neutral products
- Deep cleaning of joints and edges
- Polishing to restore the surface sheen
- Stain treatment for oil, rust and hard water
- Sealing or coating option
- Wash-down and handover
- Free inspection with a residue test on a hidden patch
- Masking and protection of adjacent surfaces
What each surface needs
| Problem | Cause | Fix |
|---|---|---|
| Grey haze after mopping | Cleaning residue and soap film | Strip, then polish |
| White patches | Hard water and acid contact | pH-neutral clean, fine polish |
| Dark spots and rings | Oil, rust or planters | Poultice, then polish |
| Patchy gloss | Uneven earlier polishing | Grind and polish to one level |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and residue test (free)
- Masking and preparation
- Stripping of residue and old polish
- Polishing to restore the sheen
- Sealing option and handover
Natural Stone Cleaning Services rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Deep cleaning and stripping | Rs 5-15 per sq ft | Residue and film removal |
| Cleaning plus polishing | Rs 15-25 per sq ft | Dull but sound floors |
| Deep clean with grinding | Rs 25-35 per sq ft | Heavy wear and stains |
| Sealing or coating | Quoted after inspection | Wet and high-traffic areas |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Preparing floors before a sale or rental listing
- Photographs are taken in daylight, so gloss and evenness matter more than in daily use
- Stain and etch marks read as neglect in listing photos and invite price negotiation
- Polishing the whole floor to one gloss level photographs better than patch repairs
- Grout and joint lines are visible in wide shots, so they get cleaned as part of the job
- Photographs of the finished floor can be included in the listing as proof of condition
We schedule pre-sale work around photographer visits and viewings, including early-morning slots so the floor is settled before people walk through.
Old polish, wax and cleaning residue are stripped before any new finish goes on. Layering a fresh treatment over residue is what makes floors look grey again within weeks.
Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.
Why clients book us
- pH-neutral products used on all calcite stone
- Residue stripped before sealing so nothing is trapped
- Test patch shown before full commitment
- One team for cleaning, polishing and sealing
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Natural Stone Cleaning Services - common questions
Why does my floor look dull right after mopping?
Because you are looking at cleaning residue and soap film, not the stone. Mopping with the wrong product keeps adding a layer. Stripping it and polishing the surface is what brings the colour back.
Is deep cleaning enough without polishing?
It restores cleanliness but not sheen. If the surface has micro-scratches and worn gloss, cleaning alone will still look grey, and polishing is needed.
Which cleaner should we use afterwards?
A pH-neutral stone cleaner with clean water. Acidic and abrasive products damage polished stone surfaces within a few uses.
How often should stone floors be deep cleaned?
Every six to twelve months for homes and every three to six months in commercial spaces, depending on footfall and cleaning method.
Is polishing worth it before selling?
It usually is. Floors dominate listing photographs, and a uniform finish reads as a maintained property. Buyers negotiate over visible stains and patchy gloss far more than over the cost of a polish.
How long before viewings should work be done?
Two to three days, so the finish has settled and any coating is fully dry before people walk in with shoes.
Can you do only the rooms that photograph?
We can, though a partly polished house shows an obvious line between rooms. We will tell you honestly where that line will fall.