Natural Marble Polishing in Delhi NCR
Cleaning and polishing are two different jobs. A floor can be clean and still look grey because the sheen is gone, and it can be shiny and still be dirty if residue has been sealed in. We do both, in the right order. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection with a residue test on a hidden patch
- Masking and protection of adjacent surfaces
- Residue and soap film stripping with pH-neutral products
- Deep cleaning of joints and edges
At a glance
- pH-neutral products
- Residue stripping
- Polishing included
A real before and after photo is added here for the strongest result.
What is included in natural marble polishing
- Deep cleaning of joints and edges
- Polishing to restore the surface sheen
- Stain treatment for oil, rust and hard water
- Sealing or coating option
- Wash-down and handover
- Free inspection with a residue test on a hidden patch
- Masking and protection of adjacent surfaces
- Residue and soap film stripping with pH-neutral products
What each surface needs
| Problem | Cause | Fix |
|---|---|---|
| Grey haze after mopping | Cleaning residue and soap film | Strip, then polish |
| White patches | Hard water and acid contact | pH-neutral clean, fine polish |
| Dark spots and rings | Oil, rust or planters | Poultice, then polish |
| Patchy gloss | Uneven earlier polishing | Grind and polish to one level |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and residue test (free)
- Masking and preparation
- Stripping of residue and old polish
- Polishing to restore the sheen
- Sealing option and handover
Natural Marble Polishing rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Deep cleaning and stripping | Rs 5-15 per sq ft | Residue and film removal |
| Cleaning plus polishing | Rs 15-25 per sq ft | Dull but sound floors |
| Deep clean with grinding | Rs 25-35 per sq ft | Heavy wear and stains |
| Sealing or coating | Quoted after inspection | Wet and high-traffic areas |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
The process, step by step
- Site inspection, gloss reading and hidden test patch
- Masking of skirting, fittings, doors and furniture edges
- Residue and old polish stripping where present
- Grinding if lippage or deep damage is found
- Progressive polishing through the grit sequence
- Optional silicate, crystallisation, epoxy or nano finish
- Edge and corner hand work
- Wash-down, walkthrough and care guidance
Each stage is completed on the whole area before the next one starts, so the floor never ends up with a bright patch next to an unfinished section.
Payment terms are stated upfront: advances apply only where material has to be bought for a large job, and the balance is settled after the walkthrough so you are never paying for work you have not seen.
Every job ends with a walkthrough. You see the gloss reading, the treated patches and the joints before the crew packs up, and the same crew owns any correction needed later.
Weight and load matter on upper floors and terraces. Where a slab has been laid over a void or a lightweight screed, we reduce machine weight and speed rather than risk cracking the base.
Why clients book us
- 12 years of stone cleaning and polishing in Delhi NCR
- pH-neutral products used on all calcite stone
- Residue stripped before sealing so nothing is trapped
- Test patch shown before full commitment
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Natural Marble Polishing - common questions
Is deep cleaning enough without polishing?
It restores cleanliness but not sheen. If the surface has micro-scratches and worn gloss, cleaning alone will still look grey, and polishing is needed.
Which cleaner should we use afterwards?
A pH-neutral stone cleaner with clean water. Acidic and abrasive products damage polished stone surfaces within a few uses.
How often should stone floors be deep cleaned?
Every six to twelve months for homes and every three to six months in commercial spaces, depending on footfall and cleaning method.
Why does my floor look dull right after mopping?
Because you are looking at cleaning residue and soap film, not the stone. Mopping with the wrong product keeps adding a layer. Stripping it and polishing the surface is what brings the colour back.
How long does each step take?
As a guide, preparation is under an hour, grinding runs 25-40 minutes per 100 sq ft, polishing 15-25 minutes, and finishing plus clean-up about an hour. Bigger areas are scheduled over more days.
Can steps be skipped to save money?
Not safely. Skipping grit stages is the most common shortcut and shows up as scratch haze within weeks. If you want to reduce cost, reduce the area covered this cycle, not the process.
Do you work in one room or the whole floor at a time?
Room by room if you are living in, whole floor if the house is empty, which produces a more even finish because lighting and drying are consistent.