Marble & floor polishing - Delhi NCR WhatsApp Request inspection +91 86070 01043 Email

Buffing or Marble Restoration Specialists in Delhi NCR

Polishing brings back gloss. Restoration fixes what dulled the floor in the first place: white etch marks under the water cooler, rust rings under planters, hairline cracks at the joints, chipped stair edges and slabs sitting at different heights. Delhi NCR???

  • Damage mapped room by room and photographed
  • Poultice treatment for oil, rust and organic stains
  • Etch mark repair by fine grinding and re-polishing
  • Crack, chip and joint filling with colour matching
Buffing or Marble Restoration Specialists in Delhi NCR
Professional equipment Klindex, Taski, diamond pads 60–3000
Diamond technology Graded steps matched to stone
Transparent quotation Written quote after inspection
Comprehensive services Marble, granite, tile & wood
Floor before polishing
Before
Floor after polishing
After

The results speak for themselves

See the difference professional polishing makes

Diamond-grade pads and staged honing restore clarity and slip-safe gloss — without replacing good stone. Every job starts with a test patch so you approve the finish before full-area work.

Our polishing process

1

Inspection

Site visit, moisture and scratch check

2

Grinding

Level uneven areas when required

3

Joint filling

Fill pits and open joints if needed

4

Honing & polishing

Diamond grit sequence to target gloss

5

Final finishing

Silicate, epoxy or nano if quoted

6

Handover

Walk-through and care advice

Related services

Suitable for

ApartmentsVillasOfficesHotelsShowroomsHospitals

Marble polishing services across Delhi NCR

Full service information

Marble Restoration · Delhi NCR

Marble Restoration Marble Restoration in Delhi NCR

Polishing brings back gloss. Restoration fixes what dulled the floor in the first place: white etch marks under the water cooler, rust rings under planters, hairline cracks at the joints, chipped stair edges and slabs sitting at different heights. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.

  • Damage mapped room by room and photographed
  • Poultice treatment for oil, rust and organic stains
  • Etch mark repair by fine grinding and re-polishing
  • Crack, chip and joint filling with colour matching

Book a free on-site inspection

At a glance

  • Etch repair
  • Poultice treatment
  • Colour-matched fills

A real before and after photo is added here for the strongest result.

What is included in marble restoration services

  • Etch mark repair by fine grinding and re-polishing
  • Crack, chip and joint filling with colour matching
  • Grinding to level slabs where needed
  • Full polishing to one uniform gloss
  • Sealer or coating over treated areas
  • Written verdict on what will repair and what needs replacing
  • Damage mapped room by room and photographed
  • Poultice treatment for oil, rust and organic stains

What each surface needs

DamageCauseHow we fix it
White etch marksLemon, vinegar, cola, toilet cleanerFine grinding then re-polish to match
Oil and ghee stainsKitchen spills, pooja areasPoultice drawing out, then polish
Rust ringsMetal legs, planters, wet iron chairsRust poultice, light grind, sealing
Hairline cracks and chipsExpansion, impact, weak jointsColour-matched epoxy fill, shaped and polished

Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.

How the job runs

  1. Damage mapping and photos (free)
  2. Poultice applied and left to draw stains out
  3. Crack, chip and joint repair, colour matched
  4. Grinding and polishing to one uniform gloss
  5. Protection applied and handover with before photos

Marble Restoration Services rates in Delhi NCR

WorkGuide bandNotes
Etch and stain removal with polishRs 15-25 per sq ftSurface-level damage
Deep restoration with grindingRs 25-35 per sq ftHeavy wear, patchiness, lippage
Poultice stain treatmentQuoted per patchOil, rust, organic stains
Crack and joint repairPer running ftFilled and colour matched

Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.

Buff or full polish? A straight answer

Condition of the floorCorrect jobWhy
Dull but even, no scratchesBuff onlySurface is sound, only the sheen is lost
Light scratches and lane wearDiamond polishSurface layer needs refining
Visible lippage or deep scratchesGrinding plus polishBuffing cannot level stone
Wax or polish residue build-upStrip, then polishNew finish will not bond over residue

Buffing is the cheaper option and we will tell you when it is enough. Selling a full polish for a floor that only needed a buff is how a contractor gets a bad name.

Every job ends with a walkthrough. You see the gloss reading, the treated patches and the joints before the crew packs up, and the same crew owns any correction needed later.

After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.

Why clients book us

  • 12 years of stone repair across Delhi NCR
  • Colour matching as standard so repairs do not show as grey lines
  • Honest verdicts when a slab must be replaced
  • One team for stain treatment, crack filling, grinding and polishing

Serving Delhi NCR and nearby areas

Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.

Book a free on-site inspection

Marble Restoration Services - common questions

Will a repaired crack be invisible?

With a colour-matched fill and re-polishing it blends into the veining and is hard to find from standing height. Under close direct light a faint line can remain, which is normal and still far better than an open crack collecting dirt.

Do treated stains come back?

Only if the cause is still there. A rust ring returns if the same wet metal leg sits on the floor again, so we recommend fixing the cause and sealing the area.

How long does restoration take?

A typical 1,000 sq ft apartment takes one to two days including poultice time, and the floor behaves like a normally polished floor afterwards.

Is restoration cheaper than replacing the floor?

Almost always. It costs a fraction of removal and re-laying, avoids matching problems with imported stone, and keeps the house usable. Replacement only makes sense for hollow, cracked-through or fully stained slabs.

Can etched marble really be repaired?

Yes if the etching is on the surface. Etch marks are shallow chemical burns of the polished layer, so light grinding and a matched polish remove them. Deep etching may leave a faint mark, which we show you on a test patch first.

How do I know if buffing is enough?

If the floor is evenly dull with no visible scratch pattern, a buff usually restores it. If you can see lanes, scratches or a step between slabs, it needs polishing or grinding, and we show you why on a test patch.

Is buffing a waste of money then?

Not at all. It is the correct maintenance step for a sound floor and costs a fraction of a full job. It becomes a waste only when the surface damage needs something deeper.

Can you do a test patch first?

Yes, on every job. One tile or a corner, so you judge the actual result before committing to the whole floor.

Frequently asked questions

Call or WhatsApp for quick answers about scope, timing and guide rates for this service.

Let's restore your floors

Free inspection · written quote · Delhi NCR