Marble Installation and Fitting in Goa
We lay, level and finish marble so the joints are tight, the surface is flat and the polish takes evenly. Bad fitting is what forces grinding later, and that costs more than doing it right. Work in Goa is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos.
- Damage mapping and crack depth check
- Joints cleaned so epoxy bonds properly
- Pigment matched against the stone shade
- Thin epoxy for hairline joints, gel for deep cracks
At a glance
- 12 years experience
- 600+ projects a year
- Written rates
A real before and after photo is added here for the strongest result.
What is included in marble installation
- Pigment matched against the stone shade
- Thin epoxy for hairline joints, gel for deep cracks
- Full cure before shaping and polishing
- Edges and corners hand finished
- Polish matched to the surrounding floor
- Optional sealing over repaired areas
- Damage mapping and crack depth check
- Joints cleaned so epoxy bonds properly
What each surface needs
| Damage | Method | Result |
|---|---|---|
| Open slab joints | Thin epoxy run in and levelled | Closed joint, no dirt trap |
| Chipped edges and corners | Epoxy built up and shaped | Edge rebuilt to profile |
| Cracked stair nosing | Deep tinted gel fill | Safe to walk on |
| Dull patchy gloss | Epoxy polish coat after diamond polishing | Bright even finish |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection to check whether the crack is cosmetic or structural (free)
- Cleaning of joints and cracks
- Tinted epoxy applied and left to cure
- Fill shaped flush and polished
- Handover with photos and advice on furniture that caused it
Marble Installation rates in Goa
| Work | Pricing | Notes |
|---|---|---|
| Joint and crack filling | Per running ft | Colour matched |
| Chip and edge rebuilding | Per repair | Shaped and polished |
| Epoxy polish over a floor | Rs 15-25 per sq ft | After diamond polishing |
| Deep epoxy sequence with crystallisation | Rs 25-35 per sq ft | Heavy patchiness |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
How our charges are built
| Charge component | What it covers | How it varies |
|---|---|---|
| Rate per sq ft | Cleaning, grinding, polishing, finishing | Surface type and area |
| Damage correction | Scratch, etch and stain treatment | Severity, decided on the test patch |
| Access and edges | Staircases, corners, upper floors | Hand work needed |
| Coatings | Silicate, crystallisation, nano, sealer | Optional, quoted separately |
- Nothing is added mid-job. If we find something the inspection could not show, we stop and re-quote with you
- Material is included in the rate, not billed as an extra
- Slab rates apply above 1,000 sq ft instead of per-room pricing
- One written figure per surface, so a mixed floor is priced line by line
Waste is removed the same day. Slurry, stripped residue, used pads and packaging leave with the crew instead of going into society bins or being left for you to dispose of.
Nothing is hidden behind a shine. Where a surface has damage that polishing cannot correct, we mark it during inspection and put it in writing, so expectations are set before work starts rather than argued over afterwards.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Why clients book us
- Full cure before polishing, because rushing is why fills sink
- Repairs photographed before and after
- 12 years of stone repair
- Epoxy 1005 and Akemi 5010 gel in stock
Serving Goa and nearby areas
Goa jobs are booked as a fixed visit batch, so travel is planned into the date instead of being added as a surprise. Work in Goa is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Installation - common questions
How long does an epoxy repair last?
Years under normal traffic, provided the surrounding slab is sound. If a slab is hollow or still moving, the underlying problem must be fixed first and we check that during inspection.
Is epoxy polishing the same as diamond polishing?
No. Diamond polishing refines the stone with abrasives. Epoxy polishing adds a brightening and protective treatment and works best on top of a properly polished floor.
Do we have to leave the room while it cures?
Only the work area needs to stay clear. Small fills cure in a few hours; larger repairs are left overnight before shaping and polishing.
Will the repaired crack show?
With a matched tint and a flush polish it blends into the veining and is hard to find from standing height. A faint line can remain under close direct light, which is normal.
Are there extra charges on top of the quoted rate?
No, provided the scope does not change. The rate covers preparation, products, machines and clean-up. Coatings and slab repairs are the only optional items, and they are listed separately in the written quote.
Do you charge for travel?
Travel is covered within the quoted rate for addresses in our service cities. For outlying areas we tell you the travel component upfront rather than adding it at handover.
What if the work needs more time than estimated?
That is our risk, not yours. The rate is per sq ft for the agreed scope, so a slow patch or a stubborn stain does not increase your bill.