Marble Ghisai And Polishing Floor Polishing Services in Delhi NCR
Marble, granite, tile, terrazzo and wooden floors all dull for different reasons, and treating them with the same machine and pads is how floors get damaged. We identify the surface first, then use the sequence that suits it. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection of every surface and its condition
- Masking and furniture shifting
- Surface-specific pad and compound selection
- Grinding where lippage or deep damage exists
At a glance
- One team, all surfaces
- Written rates
- Klindex & Taski
A real before and after photo is added here for the strongest result.
What is included in marble ghisai and polishing
- Surface-specific pad and compound selection
- Grinding where lippage or deep damage exists
- Polishing to one consistent gloss level
- Stain and residue treatment
- Optional sealing, silicate, crystallisation or nano
- Wash-down and walkthrough
- Free inspection of every surface and its condition
- Masking and furniture shifting
What each surface needs
| Surface | Process | Result |
|---|---|---|
| Marble | Grind, hone, polish | Satin to mirror gloss |
| Granite | Granite pad buff and seal | Deep lustre |
| Tile and vitrified | Scrub, refine, optional seal | Even clean finish |
| Wood | Sanding and PU or oil finish | Restored grain and sheen |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection of all surfaces (free)
- Masking and preparation
- Surface-by-surface cleaning and grinding
- Polishing to the agreed gloss on each surface
- Sealing option and handover
Marble Ghisai And Polishing rates in Delhi NCR
| Work | Guide band | Typical case |
|---|---|---|
| Buff or maintenance polish | Rs 5-15 per sq ft | Sound floors, light dulling |
| Diamond polishing | Rs 15-25 per sq ft | Scratch lanes, worn gloss |
| Deep polishing with grinding | Rs 25-35 per sq ft | Lippage, stains, heavy wear |
| Coatings | Quoted after inspection | Silicate, crystallisation, nano |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
The process, step by step
- Site inspection, gloss reading and hidden test patch
- Masking of skirting, fittings, doors and furniture edges
- Residue and old polish stripping where present
- Grinding if lippage or deep damage is found
- Progressive polishing through the grit sequence
- Optional silicate, crystallisation, epoxy or nano finish
- Edge and corner hand work
- Wash-down, walkthrough and care guidance
Each stage is completed on the whole area before the next one starts, so the floor never ends up with a bright patch next to an unfinished section.
Every job ends with a walkthrough. You see the gloss reading, the treated patches and the joints before the crew packs up, and the same crew owns any correction needed later.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Why clients book us
- 12 years of floor work across Delhi NCR, 600+ projects a year
- One crew for marble, granite, tile, terrazzo and wood
- Correct pads per surface, because one set does not suit all
- Rate fixed in writing before work starts
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Ghisai And Polishing - common questions
Can you polish different floor types in one visit?
Yes. We inspect each surface and use its own pad sequence and compounds. Doing them together is also cheaper than booking separate contractors for each room.
How do you decide between buffing, polishing and grinding?
Buffing suits a sound floor with light dullness, polishing handles scratch lanes and worn gloss, and grinding is needed where slabs are uneven or deeply damaged. The free inspection decides which is genuinely required.
Is the rate the same for every surface?
No. Harder and more damaged surfaces take longer, so rates vary by stone type and condition. You get one written rate per surface before we start.
Can we stay in the house while work is going on?
Yes. We work room by room, mask edges and leave dry walking paths, so the house stays usable throughout.
How long does each step take?
As a guide, preparation is under an hour, grinding runs 25-40 minutes per 100 sq ft, polishing 15-25 minutes, and finishing plus clean-up about an hour. Bigger areas are scheduled over more days.
Can steps be skipped to save money?
Not safely. Skipping grit stages is the most common shortcut and shows up as scratch haze within weeks. If you want to reduce cost, reduce the area covered this cycle, not the process.
Do you work in one room or the whole floor at a time?
Room by room if you are living in, whole floor if the house is empty, which produces a more even finish because lighting and drying are consistent.