Marble Floor Shine Restoration Marble Restoration in Delhi NCR
Polishing brings back gloss. Restoration fixes what dulled the floor in the first place: white etch marks under the water cooler, rust rings under planters, hairline cracks at the joints, chipped stair edges and slabs sitting at different heights. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Damage mapped room by room and photographed
- Poultice treatment for oil, rust and organic stains
- Etch mark repair by fine grinding and re-polishing
- Crack, chip and joint filling with colour matching
At a glance
- Etch repair
- Poultice treatment
- Colour-matched fills
A real before and after photo is added here for the strongest result.
What is included in marble floor shine restoration
- Poultice treatment for oil, rust and organic stains
- Etch mark repair by fine grinding and re-polishing
- Crack, chip and joint filling with colour matching
- Grinding to level slabs where needed
- Full polishing to one uniform gloss
- Sealer or coating over treated areas
- Written verdict on what will repair and what needs replacing
- Damage mapped room by room and photographed
What each surface needs
| Damage | Cause | How we fix it |
|---|---|---|
| White etch marks | Lemon, vinegar, cola, toilet cleaner | Fine grinding then re-polish to match |
| Oil and ghee stains | Kitchen spills, pooja areas | Poultice drawing out, then polish |
| Rust rings | Metal legs, planters, wet iron chairs | Rust poultice, light grind, sealing |
| Hairline cracks and chips | Expansion, impact, weak joints | Colour-matched epoxy fill, shaped and polished |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Damage mapping and photos (free)
- Poultice applied and left to draw stains out
- Crack, chip and joint repair, colour matched
- Grinding and polishing to one uniform gloss
- Protection applied and handover with before photos
Marble Floor Shine Restoration rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Etch and stain removal with polish | Rs 15-25 per sq ft | Surface-level damage |
| Deep restoration with grinding | Rs 25-35 per sq ft | Heavy wear, patchiness, lippage |
| Poultice stain treatment | Quoted per patch | Oil, rust, organic stains |
| Crack and joint repair | Per running ft | Filled and colour matched |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
What the free inspection actually covers
- Gloss reading on each surface, so we can tell wear from residue
- Damage mapping: scratches, etching, stains, cracks and lippage, marked and photographed
- Slab tapping to find hollow or lifted sections that polishing cannot save
- Measurement room by room, with you present, for the per sq ft calculation
- A hidden test patch so you see the achievable finish before committing
- A written scope listing surfaces, rates, exclusions and optional items
The inspection takes about twenty minutes for a flat and does not obligate you to book. If a competitor quotes without one, ask them what they are basing the number on.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Every job ends with a walkthrough. You see the gloss reading, the treated patches and the joints before the crew packs up, and the same crew owns any correction needed later.
Why clients book us
- One team for stain treatment, crack filling, grinding and polishing
- Before and after photos kept for every restoration
- 12 years of stone repair across Delhi NCR
- Colour matching as standard so repairs do not show as grey lines
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Floor Shine Restoration - common questions
Can etched marble really be repaired?
Yes if the etching is on the surface. Etch marks are shallow chemical burns of the polished layer, so light grinding and a matched polish remove them. Deep etching may leave a faint mark, which we show you on a test patch first.
Will a repaired crack be invisible?
With a colour-matched fill and re-polishing it blends into the veining and is hard to find from standing height. Under close direct light a faint line can remain, which is normal and still far better than an open crack collecting dirt.
Do treated stains come back?
Only if the cause is still there. A rust ring returns if the same wet metal leg sits on the floor again, so we recommend fixing the cause and sealing the area.
How long does restoration take?
A typical 1,000 sq ft apartment takes one to two days including poultice time, and the floor behaves like a normally polished floor afterwards.
Is restoration cheaper than replacing the floor?
Almost always. It costs a fraction of removal and re-laying, avoids matching problems with imported stone, and keeps the house usable. Replacement only makes sense for hollow, cracked-through or fully stained slabs.
Is the inspection really free?
Yes, with no booking obligation. It is also the only way to price honestly, because gloss and damage depth cannot be judged from photographs.
What should I have ready?
Access to every room you want quoted, and ideally a note of what you dislike about the floor: dullness, a specific stain, slipperiness or scratches near a particular door.
Will you tell me if the job is not worth doing?
Yes. If a floor only needs a light buff, or if a slab needs replacing rather than polishing, we say so at the inspection instead of selling the bigger job.