Marble Floor Polishing in Sreepally
If your marble has lost its gloss, shows grey walking lanes or looks hazy after mopping, the finish has worn through to the stone. We restore it with a graded diamond sequence and lock the shine in, so the floor holds its look instead of going flat again in a few weeks. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit.
- Free inspection including slab-thickness and hollow check
- Masking and furniture protection
- Grinding where lippage or deep scratches exist
- Graded diamond polishing to the stone hardness
At a glance
- Diamond polishing
- Stain removal
- Rate locked in writing
A real before and after photo is added here for the strongest result.
What is included in marble floor polishing
- Graded diamond polishing to the stone hardness
- Old polish and wax residue removal
- Stain treatment for oil, rust and hard water
- Silicate or crystallisation option
- Wash-down and walkthrough
- Free inspection including slab-thickness and hollow check
- Masking and furniture protection
- Grinding where lippage or deep scratches exist
What each surface needs
| Stone | Hardness | Best finish |
|---|---|---|
| Makrana white | Medium-hard, takes high gloss | Mirror gloss |
| Katni and Jaisalmer | Softer, colour sensitive | Satin to medium gloss |
| Rajnagar and green marble | Hard, banded | Gloss with even banding |
| Kota and other flagstone | Hard, matte by nature | Densified gloss or matte |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and slab check (free)
- Masking and preparation
- Grinding if lippage or residue is present
- Diamond polishing matched to stone hardness
- Handover with gloss check and care advice
Marble Floor Polishing rates in Kolkata
| Work | Guide band | Notes |
|---|---|---|
| Buff and polish | Rs 5-15 per sq ft | Light dullness |
| Diamond polishing | Rs 15-25 per sq ft | Scratches, dull lanes |
| Grinding plus deep polish | Rs 25-35 per sq ft | Lippage, heavy wear |
| Silicate or coating | Quoted after inspection | Longer gloss life |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Serving Sreepally
Marble Floor Polishing in Sreepally is handled on scheduled routes by our Kolkata team, so travel is planned rather than added as a surprise.
- Site inspection booked within 24-48 hours for Sreepally addresses
- Society gate, lift and parking permissions coordinated before the crew arrives
- Water point, power and work area confirmed at the time of booking
- Slurry and waste removed the same day, never dumped in the society bins
- Before-and-after photographs of your own Sreepally job handed over for your records
Buff or full polish? A straight answer
| Condition of the floor | Correct job | Why |
|---|---|---|
| Dull but even, no scratches | Buff only | Surface is sound, only the sheen is lost |
| Light scratches and lane wear | Diamond polish | Surface layer needs refining |
| Visible lippage or deep scratches | Grinding plus polish | Buffing cannot level stone |
| Wax or polish residue build-up | Strip, then polish | New finish will not bond over residue |
Buffing is the cheaper option and we will tell you when it is enough. Selling a full polish for a floor that only needed a buff is how a contractor gets a bad name.
Weight and load matter on upper floors and terraces. Where a slab has been laid over a void or a lightweight screed, we reduce machine weight and speed rather than risk cracking the base.
Team composition is consistent: a supervisor plus two machine operators on standard jobs, with additional hands for staircases, multiple floors or tight access. The same supervisor stays with the job start to finish.
The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.
Why clients book us
- Correct grit sequence per stone hardness
- One team for grinding, polishing and sealing
- 12 years of Indian marble and stone work
- Slab thickness and hollowness checked before any grinding
Serving Kolkata and nearby areas
Kolkata jobs are scheduled as a fixed visit batch so the crew and machines travel together and travel cost is not loaded onto your rate. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit. Inspections are booked within 24-48 hours and most jobs take 1-2 days per flat. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Floor Polishing - common questions
Can old polish and wax be removed?
Yes. Grinding strips the residue layer completely. That is the only way a new polish bonds to the stone instead of sitting on top of old compound.
Will grinding change the colour of my floor?
It restores the original colour by removing the worn and stained top layer. Floors that have faded unevenly across rooms come back to one uniform shade.
How long does it take?
Most apartments are ground and polished in one to two days, and the floor is walkable the same evening as the final pass.
Do you polish Makrana that has gone grey?
Yes. Greyness is normally surface dirt, mop haze and worn polish. It lifts with grinding and polishing, and we show you a test patch on a hidden corner first.
Does Indian marble need the same treatment as Italian marble?
No. Indian marbles such as Makrana, Katni and Rajnagar are generally harder and less acid-sensitive. They take a different grit sequence and more grinding pressure, but the same acid-free cleaning discipline still applies.
Do you cover Sreepally?
Yes. Sreepally is on our regular route with the Kolkata team, and inspections there are usually booked within 24-48 hours. For larger areas we schedule a fixed route day so travel cost is shared.
How soon can work start in Sreepally?
Inspection first, then scheduling. Most Sreepally jobs begin within a week of approval, and single-room works are often earlier if you are flexible on the date.
How do I know if buffing is enough?
If the floor is evenly dull with no visible scratch pattern, a buff usually restores it. If you can see lanes, scratches or a step between slabs, it needs polishing or grinding, and we show you why on a test patch.
Is buffing a waste of money then?
Not at all. It is the correct maintenance step for a sound floor and costs a fraction of a full job. It becomes a waste only when the surface damage needs something deeper.
Can you do a test patch first?
Yes, on every job. One tile or a corner, so you judge the actual result before committing to the whole floor.