Marble Floor Polishing in Mukundapur
Marble does not fade evenly. Doorways, kitchen entries and stair landings wear first, which is why floors start looking patchy. We polish the whole surface back to one uniform gloss so no room looks newer than the rest. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit.
- Free inspection with a residue test on a hidden patch
- Masking and protection of adjacent surfaces
- Residue and soap film stripping with pH-neutral products
- Deep cleaning of joints and edges
At a glance
- Diamond polishing
- Stain removal
- Rate locked in writing
A real before and after photo is added here for the strongest result.
What is included in marble floor polishing
- Deep cleaning of joints and edges
- Polishing to restore the surface sheen
- Stain treatment for oil, rust and hard water
- Sealing or coating option
- Wash-down and handover
- Free inspection with a residue test on a hidden patch
- Masking and protection of adjacent surfaces
- Residue and soap film stripping with pH-neutral products
What each surface needs
| Problem | Cause | Fix |
|---|---|---|
| Grey haze after mopping | Cleaning residue and soap film | Strip, then polish |
| White patches | Hard water and acid contact | pH-neutral clean, fine polish |
| Dark spots and rings | Oil, rust or planters | Poultice, then polish |
| Patchy gloss | Uneven earlier polishing | Grind and polish to one level |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and residue test (free)
- Masking and preparation
- Stripping of residue and old polish
- Polishing to restore the sheen
- Sealing option and handover
Marble Floor Polishing rates in Kolkata
| Work | Guide band | Notes |
|---|---|---|
| Deep cleaning and stripping | Rs 5-15 per sq ft | Residue and film removal |
| Cleaning plus polishing | Rs 15-25 per sq ft | Dull but sound floors |
| Deep clean with grinding | Rs 25-35 per sq ft | Heavy wear and stains |
| Sealing or coating | Quoted after inspection | Wet and high-traffic areas |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Serving Mukundapur
Marble Floor Polishing in Mukundapur is handled on scheduled routes by our Kolkata team, so travel is planned rather than added as a surprise.
- Site inspection booked within 24-48 hours for Mukundapur addresses
- Society gate, lift and parking permissions coordinated before the crew arrives
- Water point, power and work area confirmed at the time of booking
- Slurry and waste removed the same day, never dumped in the society bins
- Before-and-after photographs of your own Mukundapur job handed over for your records
What improves, and what cannot be fixed
| Condition | Realistic outcome |
|---|---|
| Dull, even wear | Full gloss returns, looks new |
| Scratch lanes in walkways | Removed, surface level again |
| Light etching and hard water | Removed with polishing |
| Deep etching or acid burns | Faint mark may remain |
| Cracked or hollow slabs | Needs replacement, not polishing |
| Stains soaked through the slab | Lightened, not erased |
We show you this on a test patch before quoting the full job, so the result you see at handover is the result you were promised.
Access is confirmed before the visit: parking, lift use, gate entry, working-hour restrictions and any society paperwork. Sorting this in advance is what stops a scheduled job from becoming a wasted trip.
Old polish, wax and cleaning residue are stripped before any new finish goes on. Layering a fresh treatment over residue is what makes floors look grey again within weeks.
Water and power are the two site requirements. We need one working socket within reach of a lead and a water point; everything else, including masking material and waste bags, comes with the crew.
Why clients book us
- Test patch shown before full commitment
- One team for cleaning, polishing and sealing
- 12 years of stone cleaning and polishing
- pH-neutral products used on all calcite stone
Serving Kolkata and nearby areas
Kolkata jobs are scheduled as a fixed visit batch so the crew and machines travel together and travel cost is not loaded onto your rate. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit. Inspections are booked within 24-48 hours and most jobs take 1-2 days per flat. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Floor Polishing - common questions
Is deep cleaning enough without polishing?
It restores cleanliness but not sheen. If the surface has micro-scratches and worn gloss, cleaning alone will still look grey, and polishing is needed.
Which cleaner should we use afterwards?
A pH-neutral stone cleaner with clean water. Acidic and abrasive products damage polished stone surfaces within a few uses.
How often should stone floors be deep cleaned?
Every six to twelve months for homes and every three to six months in commercial spaces, depending on footfall and cleaning method.
Why does my floor look dull right after mopping?
Because you are looking at cleaning residue and soap film, not the stone. Mopping with the wrong product keeps adding a layer. Stripping it and polishing the surface is what brings the colour back.
Do you cover Mukundapur?
Yes. Mukundapur is on our regular route with the Kolkata team, and inspections there are usually booked within 24-48 hours. For larger areas we schedule a fixed route day so travel cost is shared.
How soon can work start in Mukundapur?
Inspection first, then scheduling. Most Mukundapur jobs begin within a week of approval, and single-room works are often earlier if you are flexible on the date.
Can the floor look exactly new again?
On sound stone with surface wear, yes. Where damage has gone deeper, such as acid burns or stains soaked through the slab, the result is a major improvement rather than perfection, and we tell you which one to expect before starting.
Why do some floors come back brighter than others?
Stone type and previous care. White and hard marbles take a higher gloss; softer or previously acid-washed floors top out lower. Consistent cleaning products are what keep the difference from widening.
Do you guarantee the same result on every surface?
No, and no honest contractor should. A mixed floor gets one uniform gloss level chosen after testing each surface, which sometimes means a satin finish rather than mirror.