Marble Floor Polishing in Lake Gardens
Marble does not fade evenly. Doorways, kitchen entries and stair landings wear first, which is why floors start looking patchy. We polish the whole surface back to one uniform gloss so no room looks newer than the rest. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit.
- Free inspection of fill, pits and finish
- Masking of walls and fittings
- pH-neutral cleaning only
- Filler touch-up on open pits
At a glance
- Diamond polishing
- Stain removal
- Rate locked in writing
A real before and after photo is added here for the strongest result.
What is included in marble floor polishing
- Masking of walls and fittings
- pH-neutral cleaning only
- Filler touch-up on open pits
- Light honing to even the surface
- Stain and efflorescence treatment
- Impregnating sealer application
- Care guidance for daily cleaning
- Free inspection of fill, pits and finish
What each surface needs
| Surface | Correct approach | Never use |
|---|---|---|
| Travertine | Neutral clean, hone, seal | Acid cleaners |
| Limestone | Neutral clean, seal | Acid and abrasive pads |
| Honed marble | Neutral clean, light polish | Acid and bleach |
| Pitted areas | Clean into the pits, refill | High-pressure washing |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and pH test (free)
- Masking of surrounding surfaces
- Neutral cleaning of the texture
- Filler touch-up and light honing
- Sealing and handover
Marble Floor Polishing rates in Kolkata
| Work | Guide band | Notes |
|---|---|---|
| Deep cleaning | Rs 5-15 per sq ft | Neutral products |
| Cleaning and honing | Rs 15-25 per sq ft | Evening the surface |
| Filler touch-up | Per patch | Open pits and holes |
| Sealing | Quoted after inspection | Impregnating sealer |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Serving Lake Gardens
Marble Floor Polishing in Lake Gardens is handled on scheduled routes by our Kolkata team, so travel is planned rather than added as a surprise.
- Site inspection booked within 24-48 hours for Lake Gardens addresses
- Society gate, lift and parking permissions coordinated before the crew arrives
- Water point, power and work area confirmed at the time of booking
- Slurry and waste removed the same day, never dumped in the society bins
- Before-and-after photographs of your own Lake Gardens job handed over for your records
Keeping the finish after the job is done
| Habit | Why it matters |
|---|---|
| Dry dust mopping | Removes grit before it scratches the surface |
| pH-neutral cleaner only | Acid etches marble and bleach dulls the finish |
| Damp mop, never flooding | Standing water leaves marks and weakens joints |
| Mats at entries | Captures grit where it enters |
| Felt pads under furniture | Stops drag marks on polished surfaces |
- A light maintenance polish every 12-18 months keeps gloss without a full job
- Commercial floors are usually re-polished annually, homes every two years
- Sealer or nano coating, where applied, is refreshed on the schedule we hand over
Quality is checked twice: once mid-job, when the first section is finished and you can see the achievable gloss, and once at handover when the whole surface should read evenly under daylight and under your own lighting.
Access is confirmed before the visit: parking, lift use, gate entry, working-hour restrictions and any society paperwork. Sorting this in advance is what stops a scheduled job from becoming a wasted trip.
Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.
Why clients book us
- Filler touch-up before honing so pits do not drag
- Impregnating sealer offered but not oversold
- Test patch on a hidden area first
- 12 years of natural stone work
Serving Kolkata and nearby areas
Kolkata jobs are scheduled as a fixed visit batch so the crew and machines travel together and travel cost is not loaded onto your rate. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit. Inspections are booked within 24-48 hours and most jobs take 1-2 days per flat. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Floor Polishing - common questions
Why is acid so damaging to travertine?
Travertine and limestone are calcium-based. Acid dissolves the surface binder, which leaves white etch marks and opens the texture, and the damage is permanent unless the surface is honed back.
Will cleaning remove dirt from the pits?
Yes, with the right brushes and neutral cleaner, but the pits will refill over time. Filling open pits at the same visit is the practical fix.
Can travertine be polished to a shine?
It can be honed or lightly polished, but a mirror finish on soft, pitted stone is neither natural nor durable. We usually recommend a honed finish with sealer.
How often should it be sealed?
Every twelve to twenty-four months for floors, and more often in wet areas. Sealer slows absorption rather than blocking it.
Do you cover Lake Gardens?
Yes. Lake Gardens is on our regular route with the Kolkata team, and inspections there are usually booked within 24-48 hours. For larger areas we schedule a fixed route day so travel cost is shared.
How soon can work start in Lake Gardens?
Inspection first, then scheduling. Most Lake Gardens jobs begin within a week of approval, and single-room works are often earlier if you are flexible on the date.
How often does the floor need a maintenance polish?
Every 12-18 months for homes and every 8-12 months for commercial floors. It is a much smaller job than the original restoration.
Which cleaner should we use?
A pH-neutral stone cleaner with clean water, dried after mopping. Avoid acid, bleach and abrasive powders, which are the main causes of dull and etched floors.
Can maintenance work be done room by room?
Yes. We schedule it in sections so the house stays usable, and it takes a fraction of the time of a full polish.