Marble Floor Polishing in Kasba
If your marble has lost its gloss, shows grey walking lanes or looks hazy after mopping, the finish has worn through to the stone. We restore it with a graded diamond sequence and lock the shine in, so the floor holds its look instead of going flat again in a few weeks. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit.
- Damage mapping and crack depth check
- Joints cleaned so epoxy bonds properly
- Pigment matched against the stone shade
- Thin epoxy for hairline joints, gel for deep cracks
At a glance
- Diamond polishing
- Stain removal
- Rate locked in writing
A real before and after photo is added here for the strongest result.
What is included in marble floor polishing
- Thin epoxy for hairline joints, gel for deep cracks
- Full cure before shaping and polishing
- Edges and corners hand finished
- Polish matched to the surrounding floor
- Optional sealing over repaired areas
- Damage mapping and crack depth check
- Joints cleaned so epoxy bonds properly
- Pigment matched against the stone shade
What each surface needs
| Damage | Method | Result |
|---|---|---|
| Open slab joints | Thin epoxy run in and levelled | Closed joint, no dirt trap |
| Chipped edges and corners | Epoxy built up and shaped | Edge rebuilt to profile |
| Cracked stair nosing | Deep tinted gel fill | Safe to walk on |
| Dull patchy gloss | Epoxy polish coat after diamond polishing | Bright even finish |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection to check whether the crack is cosmetic or structural (free)
- Cleaning of joints and cracks
- Tinted epoxy applied and left to cure
- Fill shaped flush and polished
- Handover with photos and advice on furniture that caused it
Marble Floor Polishing rates in Kolkata
| Work | Pricing | Notes |
|---|---|---|
| Joint and crack filling | Per running ft | Colour matched |
| Chip and edge rebuilding | Per repair | Shaped and polished |
| Epoxy polish over a floor | Rs 15-25 per sq ft | After diamond polishing |
| Deep epoxy sequence with crystallisation | Rs 25-35 per sq ft | Heavy patchiness |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Serving Kasba
Marble Floor Polishing in Kasba is handled on scheduled routes by our Kolkata team, so travel is planned rather than added as a surprise.
- Site inspection booked within 24-48 hours for Kasba addresses
- Society gate, lift and parking permissions coordinated before the crew arrives
- Water point, power and work area confirmed at the time of booking
- Slurry and waste removed the same day, never dumped in the society bins
- Before-and-after photographs of your own Kasba job handed over for your records
Keeping the finish after the job is done
| Habit | Why it matters |
|---|---|
| Dry dust mopping | Removes grit before it scratches the surface |
| pH-neutral cleaner only | Acid etches marble and bleach dulls the finish |
| Damp mop, never flooding | Standing water leaves marks and weakens joints |
| Mats at entries | Captures grit where it enters |
| Felt pads under furniture | Stops drag marks on polished surfaces |
- A light maintenance polish every 12-18 months keeps gloss without a full job
- Commercial floors are usually re-polished annually, homes every two years
- Sealer or nano coating, where applied, is refreshed on the schedule we hand over
Quotes are itemised per surface rather than as one lump sum, so a mixed floor of marble, tile and stone is priced line by line and you can approve, defer or drop any line.
The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.
Machines are matched to the job. A 400 mm single-disc machine for open floors, edge machines for skirtings and staircases, and hand blocks for corners and thresholds where a machine cannot safely reach.
Why clients book us
- Pigment matched to the stone, never a grey patch
- Full cure before polishing, because rushing is why fills sink
- Repairs photographed before and after
- 12 years of stone repair
Serving Kolkata and nearby areas
Kolkata jobs are scheduled as a fixed visit batch so the crew and machines travel together and travel cost is not loaded onto your rate. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit. Inspections are booked within 24-48 hours and most jobs take 1-2 days per flat. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Floor Polishing - common questions
How long does an epoxy repair last?
Years under normal traffic, provided the surrounding slab is sound. If a slab is hollow or still moving, the underlying problem must be fixed first and we check that during inspection.
Is epoxy polishing the same as diamond polishing?
No. Diamond polishing refines the stone with abrasives. Epoxy polishing adds a brightening and protective treatment and works best on top of a properly polished floor.
Do we have to leave the room while it cures?
Only the work area needs to stay clear. Small fills cure in a few hours; larger repairs are left overnight before shaping and polishing.
Will the repaired crack show?
With a matched tint and a flush polish it blends into the veining and is hard to find from standing height. A faint line can remain under close direct light, which is normal.
Do you cover Kasba?
Yes. Kasba is on our regular route with the Kolkata team, and inspections there are usually booked within 24-48 hours. For larger areas we schedule a fixed route day so travel cost is shared.
How soon can work start in Kasba?
Inspection first, then scheduling. Most Kasba jobs begin within a week of approval, and single-room works are often earlier if you are flexible on the date.
How often does the floor need a maintenance polish?
Every 12-18 months for homes and every 8-12 months for commercial floors. It is a much smaller job than the original restoration.
Which cleaner should we use?
A pH-neutral stone cleaner with clean water, dried after mopping. Avoid acid, bleach and abrasive powders, which are the main causes of dull and etched floors.
Can maintenance work be done room by room?
Yes. We schedule it in sections so the house stays usable, and it takes a fraction of the time of a full polish.