Marble Floor Polishing in Kankurgachi
If your marble has lost its gloss, shows grey walking lanes or looks hazy after mopping, the finish has worn through to the stone. We restore it with a graded diamond sequence and lock the shine in, so the floor holds its look instead of going flat again in a few weeks. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit.
- Photographed damage map and gloss reading
- Test patch on a hidden area before full approval
- Acid-proof masking of skirting, walls and fittings
- Sequential diamond passes at controlled speed
At a glance
- Diamond polishing
- Stain removal
- Rate locked in writing
A real before and after photo is added here for the strongest result.
What is included in marble floor polishing
- Photographed damage map and gloss reading
- Test patch on a hidden area before full approval
- Acid-proof masking of skirting, walls and fittings
- Sequential diamond passes at controlled speed
- Vein-safe polishing and hand-finished edges
- pH-neutral deep clean before finishing
- Sealer, silicate or nano coating on request
- Written after-care rules for the first month
What each surface needs
| Marble | Character | What to watch for |
|---|---|---|
| Statuario | White with bold grey veining | Etches fast, needs prompt spill control |
| Carrara | Soft white, subtle grey | Softer stone, dulls quickly in entries |
| Calacatta | Warm white with gold veins | Needs gentle pads to avoid vein bleeding |
| Perlatino and Botticino | Warm beige with fine veins | Yellowing if filled slabs are over-polished |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Identify the marble type and check for resin filling (free)
- Masking with acid-proof covering
- Diamond passes at controlled speed, 30-45 minutes per 100 sq ft
- Polish to the agreed gloss, then seal or coat if required
- Before and after comparison plus a list of products never to use
Marble Floor Polishing rates in Kolkata
| Work | Guide band | Typical case |
|---|---|---|
| Maintenance polish | Rs 5-15 per sq ft | Light dulling, sound floor |
| Diamond polish to restore gloss | Rs 15-25 per sq ft | Traffic lanes, mop haze |
| Deep polish with crystallisation | Rs 25-35 per sq ft | Heavy wear, etching, patchiness |
| Sealing or nano coating | Quoted after inspection | Kitchens, entries, high traffic |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Serving Kankurgachi
Marble Floor Polishing in Kankurgachi is handled on scheduled routes by our Kolkata team, so travel is planned rather than added as a surprise.
- Site inspection booked within 24-48 hours for Kankurgachi addresses
- Society gate, lift and parking permissions coordinated before the crew arrives
- Water point, power and work area confirmed at the time of booking
- Slurry and waste removed the same day, never dumped in the society bins
- Before-and-after photographs of your own Kankurgachi job handed over for your records
What a proper job must include
| Stage | Non-negotiable |
|---|---|
| Before starting | Gloss reading, damage map, hidden test patch, written rate |
| Preparation | Skirting, fittings and furniture edges masked |
| During | Correct pad sequence for the stone, no skipped grits |
| Finishing | Edges and corners hand-done, not left dull |
| Handover | Walkthrough with you, after-care note, waste removed |
Use this list to compare any quote you receive, ours included. If a contractor skips the test patch or the handover walkthrough, the finish will show it within weeks.
The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.
Timing is agreed before the crew arrives: arrival window, the room sequence and the handover time are confirmed in writing, so nobody is waiting around or guessing when the floor will be free.
Waste is removed the same day. Slurry, stripped residue, used pads and packaging leave with the crew instead of going into society bins or being left for you to dispose of.
Why clients book us
- Lower heat and pressure on resin-filled slabs to prevent yellowing
- One gloss standard across the whole floor, no patch looks newer
- Silicate, epoxy and Akemi nano products in stock
- 12 years including villa, hotel and showroom projects
Serving Kolkata and nearby areas
Kolkata jobs are scheduled as a fixed visit batch so the crew and machines travel together and travel cost is not loaded onto your rate. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit. Inspections are booked within 24-48 hours and most jobs take 1-2 days per flat. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Floor Polishing - common questions
Why does Italian marble dull faster than Indian marble?
It is usually the cleaning, not the stone. White imported marbles are calcium-based, so acidic cleaners and lemon juice etch the surface and leave white patches within days. A pH-neutral cleaner and clean-water mopping solves most of it.
Will polishing change the pattern?
No. Diamond polishing removes the damaged top layer; it does not bleach or alter the veining. On filled slabs we work at lower speed specifically to avoid yellowing.
Can yellowed Italian marble be corrected?
Polish residue and hard-water film lift during diamond polishing. Yellowing inside a filled slab is internal and cannot be polished out, so we test a patch and tell you the realistic outcome first.
How often does it need polishing?
Homes every 18-24 months with neutral cleaning. Lobbies, showrooms and entries every 8-12 months, longer with a sealer or nano coating.
Is a sealer worth it?
Yes in working areas. It slows absorption of oil, tea and coloured liquids, which buys time to wipe a spill, and needs refreshing every 12-24 months.
Do you cover Kankurgachi?
Yes. Kankurgachi is on our regular route with the Kolkata team, and inspections there are usually booked within 24-48 hours. For larger areas we schedule a fixed route day so travel cost is shared.
How soon can work start in Kankurgachi?
Inspection first, then scheduling. Most Kankurgachi jobs begin within a week of approval, and single-room works are often earlier if you are flexible on the date.
What should I check before paying?
That every surface you were quoted for has been finished, that edges and corners are not dull, that joints are clean and that the waste has been removed. Walk the floor with the crew still present, not after they leave.
Do you provide a written scope?
Yes. Surface by surface, with rate and scope, plus any optional items listed separately. Nothing is added after the work starts unless you approve a change.
Is a test patch really necessary?
It is the cheapest insurance on the job. One tile or a corner shows you the real result before you commit the whole floor.