Marble Floor Polishing in Garulia
If your marble has lost its gloss, shows grey walking lanes or looks hazy after mopping, the finish has worn through to the stone. We restore it with a graded diamond sequence and lock the shine in, so the floor holds its look instead of going flat again in a few weeks. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit.
- Free inspection of fill, pits and finish
- Masking of walls and fittings
- pH-neutral cleaning only
- Filler touch-up on open pits
At a glance
- Diamond polishing
- Stain removal
- Rate locked in writing
A real before and after photo is added here for the strongest result.
What is included in marble floor polishing
- Masking of walls and fittings
- pH-neutral cleaning only
- Filler touch-up on open pits
- Light honing to even the surface
- Stain and efflorescence treatment
- Impregnating sealer application
- Care guidance for daily cleaning
- Free inspection of fill, pits and finish
What each surface needs
| Surface | Correct approach | Never use |
|---|---|---|
| Travertine | Neutral clean, hone, seal | Acid cleaners |
| Limestone | Neutral clean, seal | Acid and abrasive pads |
| Honed marble | Neutral clean, light polish | Acid and bleach |
| Pitted areas | Clean into the pits, refill | High-pressure washing |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and pH test (free)
- Masking of surrounding surfaces
- Neutral cleaning of the texture
- Filler touch-up and light honing
- Sealing and handover
Marble Floor Polishing rates in Kolkata
| Work | Guide band | Notes |
|---|---|---|
| Deep cleaning | Rs 5-15 per sq ft | Neutral products |
| Cleaning and honing | Rs 15-25 per sq ft | Evening the surface |
| Filler touch-up | Per patch | Open pits and holes |
| Sealing | Quoted after inspection | Impregnating sealer |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Serving Garulia
Marble Floor Polishing in Garulia is handled on scheduled routes by our Kolkata team, so travel is planned rather than added as a surprise.
- Site inspection booked within 24-48 hours for Garulia addresses
- Society gate, lift and parking permissions coordinated before the crew arrives
- Water point, power and work area confirmed at the time of booking
- Slurry and waste removed the same day, never dumped in the society bins
- Before-and-after photographs of your own Garulia job handed over for your records
Looking after the finish
| Timeframe | What to do |
|---|---|
| First 24 hours | Stay off coated areas, keep furniture off the floor |
| First week | Dry mop only, no wet mopping, no chemical cleaners |
| Ongoing | pH-neutral cleaner, damp mop, dry after |
| Every 12-18 months | Light maintenance polish to hold the gloss |
- Never use acid, bleach, vinegar or abrasive powder on stone
- Wipe spills promptly, particularly lemon, tea and oil
- Use felt pads on furniture and mats at entry points
- Keep planters and metal legs off wet floors to prevent rust rings
Machines are matched to the job. A 400 mm single-disc machine for open floors, edge machines for skirtings and staircases, and hand blocks for corners and thresholds where a machine cannot safely reach.
Waste is removed the same day. Slurry, stripped residue, used pads and packaging leave with the crew instead of going into society bins or being left for you to dispose of.
Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.
Why clients book us
- Impregnating sealer offered but not oversold
- Test patch on a hidden area first
- 12 years of natural stone work
- Acid-free on all calcite stone, without exception
Serving Kolkata and nearby areas
Kolkata jobs are scheduled as a fixed visit batch so the crew and machines travel together and travel cost is not loaded onto your rate. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit. Inspections are booked within 24-48 hours and most jobs take 1-2 days per flat. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Floor Polishing - common questions
Will cleaning remove dirt from the pits?
Yes, with the right brushes and neutral cleaner, but the pits will refill over time. Filling open pits at the same visit is the practical fix.
Can travertine be polished to a shine?
It can be honed or lightly polished, but a mirror finish on soft, pitted stone is neither natural nor durable. We usually recommend a honed finish with sealer.
How often should it be sealed?
Every twelve to twenty-four months for floors, and more often in wet areas. Sealer slows absorption rather than blocking it.
Why is acid so damaging to travertine?
Travertine and limestone are calcium-based. Acid dissolves the surface binder, which leaves white etch marks and opens the texture, and the damage is permanent unless the surface is honed back.
Do you cover Garulia?
Yes. Garulia is on our regular route with the Kolkata team, and inspections there are usually booked within 24-48 hours. For larger areas we schedule a fixed route day so travel cost is shared.
How soon can work start in Garulia?
Inspection first, then scheduling. Most Garulia jobs begin within a week of approval, and single-room works are often earlier if you are flexible on the date.
What should I avoid in the first week?
Wet mopping, chemical floor cleaners, dragging furniture and placing potted plants back on the floor. Dry mopping and clean water only until the finish settles.
Which cleaner do you recommend?
Any pH-neutral stone cleaner, used with clean water and followed by drying. That single habit prevents most of the dullness and staining we are called back to fix.
What voids the finish durability?
Acid and abrasive cleaning. A floor polished this month can look dull in eight weeks if it is mopped with an acidic general-purpose cleaner.