Marble Fitting in Goa
We lay, level and finish marble so the joints are tight, the surface is flat and the polish takes evenly. Bad fitting is what forces grinding later, and that costs more than doing it right. Work in Goa is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos.
- Free on-site gloss and scratch check
- Masking of skirting, walls and furniture edges
- Diamond grinding where scratches or lippage need it
- Progressive honing and fine polishing passes
At a glance
- 12 years experience
- 600+ projects a year
- Written rates
A real before and after photo is added here for the strongest result.
What is included in marble fitting
- Masking of skirting, walls and furniture edges
- Diamond grinding where scratches or lippage need it
- Progressive honing and fine polishing passes
- Marble-safe stain and film removal (no acid)
- Edge, corner and staircase hand polishing
- Grout-line clean-up and hairline crack fill
- Optional silicate, crystallisation or nano finish
- Full wash-down and walkthrough with you
- After-care guidance for the first week
- Free on-site gloss and scratch check
What each surface needs
| Stone | What we do | Finish you get |
|---|---|---|
| Italian marble (Statuario, Carrara) | Fine honing and polishing, acid-free | High mirror gloss |
| Makrana and Indian marble | Grinding, stain removal, silicate option | Deep satin to gloss |
| Kota and Katni stone | Level grinding, densifier, buff | Even matte to gloss |
| Terrazzo and mosaic | Ground back to aggregate, then polished | Medium to high gloss |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and gloss reading (free, 20 minutes)
- Masking and furniture shifting (30 minutes)
- Grinding and honing, 25-40 minutes per 100 sq ft
- Polishing and optional sealing, 15-25 minutes per 100 sq ft
- Wash-down, gloss check with you and after-care note
Marble Fitting rates in Goa
| Work | Guide band | Typical case |
|---|---|---|
| Maintenance buff | Rs 5-15 per sq ft | Sound floor, light dulling |
| Diamond polishing | Rs 15-25 per sq ft | Scratch lanes, worn gloss |
| Deep diamond plus crystallisation | Rs 25-35 per sq ft | Heavy wear, stains, lippage |
| Silicate or nano coating | Quoted after inspection | Wet areas, high traffic |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
How to get a quote that does not change
- WhatsApp photos of the dullest area and the worst stain speed up the first estimate
- A free on-site inspection gives the final figure, because gloss readings and damage depth cannot be judged from a photo
- The written quote lists surface by surface: area, rate, scope and exclusions
- Coatings, crack repairs and slab replacement appear as separate optional lines
- The figure is valid for thirty days unless you ask us to hold it longer
If a contractor quotes a single number for a whole house without inspecting it, that number will change once work starts. We would rather quote after looking.
Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Quality is checked twice: once mid-job, when the first section is finished and you can see the achievable gloss, and once at handover when the whole surface should read evenly under daylight and under your own lighting.
Why clients book us
- Klindex and Taski machines with fresh diamond segments
- Quote fixed in writing before the first pad runs
- Silicate Sil200 and Sil800, Epoxy 1005 and Akemi nano in stock
- 12 years of marble and stone work
Serving Goa and nearby areas
Goa jobs are booked as a fixed visit batch, so travel is planned into the date instead of being added as a surprise. Work in Goa is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Fitting - common questions
How long does the job take?
A two-person crew finishes about 800-1,000 sq ft in a working day. Grinding plus polishing on the same area adds roughly half a day. The floor is walkable the same evening.
Will polishing thin my marble?
Polishing removes microns, not millimetres. We test a patch first and step through grits gradually, so only the worn surface layer is corrected and the slab keeps its thickness.
Do you use acid on marble?
Never. Marble is calcium-based, so acid etches it. We clean with pH-neutral products and treat oil, rust and paint stains with poultice instead.
Can we stay in the house during the work?
Yes. Polishing is done wet so dust stays low, furniture edges are masked and we leave dry walking paths overnight.
How often should marble be polished?
Homes usually every 18-24 months because of dust and monsoon film; offices and showrooms every 8-12 months.
Can I get a quote on WhatsApp?
Yes as an indicative band. Send photos in daylight of the dullest area, any stains and one close-up of the surface. The final figure is confirmed after the free on-site inspection.
How long is the quote valid?
Thirty days from the inspection date. Material and product rates move, so we do not hold figures indefinitely, but we will tell you if anything changes.
Is the inspection really free?
Yes. There is no charge for the site visit or the measurement, and no obligation to proceed afterwards.