Marble Buffing Floor Polishing Services in Delhi NCR
Marble, granite, tile, terrazzo and wooden floors all dull for different reasons, and treating them with the same machine and pads is how floors get damaged. We identify the surface first, then use the sequence that suits it. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection of every surface and its condition
- Masking and furniture shifting
- Surface-specific pad and compound selection
- Grinding where lippage or deep damage exists
At a glance
- One team, all surfaces
- Written rates
- Klindex & Taski
A real before and after photo is added here for the strongest result.
What is included in marble buffing service
- Grinding where lippage or deep damage exists
- Polishing to one consistent gloss level
- Stain and residue treatment
- Optional sealing, silicate, crystallisation or nano
- Wash-down and walkthrough
- Free inspection of every surface and its condition
- Masking and furniture shifting
- Surface-specific pad and compound selection
What each surface needs
| Surface | Process | Result |
|---|---|---|
| Marble | Grind, hone, polish | Satin to mirror gloss |
| Granite | Granite pad buff and seal | Deep lustre |
| Tile and vitrified | Scrub, refine, optional seal | Even clean finish |
| Wood | Sanding and PU or oil finish | Restored grain and sheen |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection of all surfaces (free)
- Masking and preparation
- Surface-by-surface cleaning and grinding
- Polishing to the agreed gloss on each surface
- Sealing option and handover
Marble Buffing Service rates in Delhi NCR
| Work | Guide band | Typical case |
|---|---|---|
| Buff or maintenance polish | Rs 5-15 per sq ft | Sound floors, light dulling |
| Diamond polishing | Rs 15-25 per sq ft | Scratch lanes, worn gloss |
| Deep polishing with grinding | Rs 25-35 per sq ft | Lippage, stains, heavy wear |
| Coatings | Quoted after inspection | Silicate, crystallisation, nano |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Looking after the finish
| Timeframe | What to do |
|---|---|
| First 24 hours | Stay off coated areas, keep furniture off the floor |
| First week | Dry mop only, no wet mopping, no chemical cleaners |
| Ongoing | pH-neutral cleaner, damp mop, dry after |
| Every 12-18 months | Light maintenance polish to hold the gloss |
- Never use acid, bleach, vinegar or abrasive powder on stone
- Wipe spills promptly, particularly lemon, tea and oil
- Use felt pads on furniture and mats at entry points
- Keep planters and metal legs off wet floors to prevent rust rings
Every job ends with a walkthrough. You see the gloss reading, the treated patches and the joints before the crew packs up, and the same crew owns any correction needed later.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Why clients book us
- 12 years of floor work across Delhi NCR, 600+ projects a year
- One crew for marble, granite, tile, terrazzo and wood
- Correct pads per surface, because one set does not suit all
- Rate fixed in writing before work starts
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Buffing Service - common questions
How do you decide between buffing, polishing and grinding?
Buffing suits a sound floor with light dullness, polishing handles scratch lanes and worn gloss, and grinding is needed where slabs are uneven or deeply damaged. The free inspection decides which is genuinely required.
Is the rate the same for every surface?
No. Harder and more damaged surfaces take longer, so rates vary by stone type and condition. You get one written rate per surface before we start.
Can we stay in the house while work is going on?
Yes. We work room by room, mask edges and leave dry walking paths, so the house stays usable throughout.
Can you polish different floor types in one visit?
Yes. We inspect each surface and use its own pad sequence and compounds. Doing them together is also cheaper than booking separate contractors for each room.
What should I avoid in the first week?
Wet mopping, chemical floor cleaners, dragging furniture and placing potted plants back on the floor. Dry mopping and clean water only until the finish settles.
Which cleaner do you recommend?
Any pH-neutral stone cleaner, used with clean water and followed by drying. That single habit prevents most of the dullness and staining we are called back to fix.
What voids the finish durability?
Acid and abrasive cleaning. A floor polished this month can look dull in eight weeks if it is mopped with an acidic general-purpose cleaner.