Marble Polish Company Floor Polishing Services in Delhi NCR
Marble, granite, tile, terrazzo and wooden floors all dull for different reasons, and treating them with the same machine and pads is how floors get damaged. We identify the surface first, then use the sequence that suits it. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection of every surface and its condition
- Masking and furniture shifting
- Surface-specific pad and compound selection
- Grinding where lippage or deep damage exists
At a glance
- One team, all surfaces
- Written rates
- Klindex & Taski
A real before and after photo is added here for the strongest result.
What is included in kolkata marble polish service company
- Grinding where lippage or deep damage exists
- Polishing to one consistent gloss level
- Stain and residue treatment
- Optional sealing, silicate, crystallisation or nano
- Wash-down and walkthrough
- Free inspection of every surface and its condition
- Masking and furniture shifting
- Surface-specific pad and compound selection
What each surface needs
| Surface | Process | Result |
|---|---|---|
| Marble | Grind, hone, polish | Satin to mirror gloss |
| Granite | Granite pad buff and seal | Deep lustre |
| Tile and vitrified | Scrub, refine, optional seal | Even clean finish |
| Wood | Sanding and PU or oil finish | Restored grain and sheen |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection of all surfaces (free)
- Masking and preparation
- Surface-by-surface cleaning and grinding
- Polishing to the agreed gloss on each surface
- Sealing option and handover
Kolkata Marble Polish Service Company rates in Delhi NCR
| Work | Guide band | Typical case |
|---|---|---|
| Buff or maintenance polish | Rs 5-15 per sq ft | Sound floors, light dulling |
| Diamond polishing | Rs 15-25 per sq ft | Scratch lanes, worn gloss |
| Deep polishing with grinding | Rs 25-35 per sq ft | Lippage, stains, heavy wear |
| Coatings | Quoted after inspection | Silicate, crystallisation, nano |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
The problems we are usually called for
| Problem | What causes it | Fix |
|---|---|---|
| Overall dullness | Worn finish, cleaning residue | Strip and re-polish |
| Scratch lanes | Grit walked in from entrances | Diamond polish those lanes |
| Grey or black patches | Water trapped, old polish build-up | Grind, dry, polish, seal |
| White watermark rings | Planters, metal legs, spills | Poultice and re-polish |
| Loose or black joints | Failed grouting, water ingress | Cut out and re-point |
| Slippery when wet | Gloss in a wet area | Satin finish plus anti-skid |
Send a photo of the worst patch on WhatsApp and we will tell you which of these it is before anyone visits.
Old polish, wax and cleaning residue are stripped before any new finish goes on. Layering a fresh treatment over residue is what makes floors look grey again within weeks.
Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.
Why clients book us
- 12 years of floor work across Delhi NCR, 600+ projects a year
- One crew for marble, granite, tile, terrazzo and wood
- Correct pads per surface, because one set does not suit all
- Rate fixed in writing before work starts
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Kolkata Marble Polish Service Company - common questions
How do you decide between buffing, polishing and grinding?
Buffing suits a sound floor with light dullness, polishing handles scratch lanes and worn gloss, and grinding is needed where slabs are uneven or deeply damaged. The free inspection decides which is genuinely required.
Is the rate the same for every surface?
No. Harder and more damaged surfaces take longer, so rates vary by stone type and condition. You get one written rate per surface before we start.
Can we stay in the house while work is going on?
Yes. We work room by room, mask edges and leave dry walking paths, so the house stays usable throughout.
Can you polish different floor types in one visit?
Yes. We inspect each surface and use its own pad sequence and compounds. Doing them together is also cheaper than booking separate contractors for each room.
Which of these can you fix in one visit?
Dullness, scratch lanes, watermark rings and slippery surfaces are usually single-visit jobs. Trapped water, loose joints and cracked or hollow slabs may need a second visit because of drying or re-pointing time.
What if the damage is worse than the photos showed?
We stop and re-quote rather than continuing on a guess. You approve the revised scope or we finish what was agreed and leave the rest.
Can repeated problems be prevented?
Most of them, yes. Entrance mats, pH-neutral cleaning, felt pads and prompt spill wipe-up remove the four causes behind the majority of callbacks.