Hardwood Floor Polishing Wooden Floor Polishing in Delhi NCR
If your wood floor looks pale in the middle of the room but fine at the edges, the finish has simply worn through in the traffic path. Re-coating that path alone leaves a visible patch, which is why we do the whole room. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Moisture reading and board-soundness check
- Furniture shifting and room masking
- Dust-controlled sanding through the grit sequence
- Gap filling, crack and dent repair
At a glance
- Dust-controlled
- Gap filling
- PU / melamine / oil
A real before and after photo is added here for the strongest result.
What is included in hardwood floor polishing service
- Gap filling, crack and dent repair
- Stain matching on patch repairs
- Two to three finishing coats
- Skirting, staircase and corner hand finishing
- Care sheet for mopping and monsoon humidity
- Moisture reading and board-soundness check
- Furniture shifting and room masking
- Dust-controlled sanding through the grit sequence
What each surface needs
| Wood type | What we do | Result |
|---|---|---|
| Solid teak, sheesham, oak, walnut | Full sand and refinish, gap filling | Like-new, long finish life |
| Engineered hardwood veneer | Light sand, thin-coat finishing | Even grain, gloss restored |
| Sound floor with worn finish | Buff and re-coat, no sanding | Fresh gloss, one-day job |
| Laminate, vinyl and PVC | Cleaning and surface polish only | Cannot be sanded |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and moisture check (free)
- Masking and dust barriers
- Sanding through the grit sequence
- Gap filling, then two to three coats
- Handover after cure time with a care sheet
Hardwood Floor Polishing Service rates in Delhi NCR
| Work | Pricing | Typical scope |
|---|---|---|
| Buff and re-coat | Per sq ft | Sound floor, dull surface |
| Sanding plus two coats | Per sq ft | Worn finish, scratches |
| Sanding plus three coats | Per sq ft | Deep scratches, high traffic |
| Gap filling and repairs | Per running ft | Board gaps and cracks |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Questions we are asked most
How is the rate decided?
Surface type, damage depth, total area and access, confirmed by measurement during a free inspection. You get one written figure per surface, not a lump sum.
How long does the floor take to be usable?
Most jobs are walkable the same evening. Coated floors need a few hours longer before furniture goes back, and we tell you the exact window at handover.
Can you work while we are living at home?
Yes. Work is done room by room, furniture edges masked and dry walking paths left overnight.
What if we are not satisfied?
Walk the floor with the crew before they leave. Anything you flag is corrected on the spot or scheduled, and that is why we insist on the handover walkthrough.
Old polish, wax and cleaning residue are stripped before any new finish goes on. Layering a fresh treatment over residue is what makes floors look grey again within weeks.
Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.
Why clients book us
- Honest limits: laminate and vinyl cannot be sanded
- Same crew handles mixed marble-and-wood flats
- Low-odour water-based finishes used where possible
- 12 years of wood and stone floor work in Delhi NCR
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Hardwood Floor Polishing Service - common questions
Will sanding fill the house with dust?
We sand with dust control and mask doorways, skirting and furniture. A fine settling of dust nearby is normal in any sanding job, and we wipe the work area before handover.
How long before we can use the floor?
PU and lacquer floors are walkable after 24 hours and ready for furniture after 48. Melamine dries in 12-24 hours. Oil finishes can be walked on almost immediately but need re-oiling twice a year.
How often does a wooden floor need refinishing?
Homes every 6-10 years; offices and cafes every 3-5 years, or sooner if the walking lanes turn pale while the edges still look fine.
Can water stains and swollen boards be fixed?
Light black water marks and grey patches sand out. Boards that have cupped or gone spongy usually need replacing, and we identify those during the free inspection.
Do you bring your own machines and products?
Yes. Machines, pads, compounds and masking material all come with the crew. You only need to provide a water point and a working power socket.
How do you handle payment?
The package is confirmed in writing first. Advance for material applies on large jobs, and the balance is settled after the walkthrough, not before.
Is there a warranty?
Workmanship terms are confirmed in writing on the quotation, so you know exactly what is covered and for how long before the job starts.