Etching Marble Repair Floor Polishing Services in Delhi NCR
Marble, granite, tile, terrazzo and wooden floors all dull for different reasons, and treating them with the same machine and pads is how floors get damaged. We identify the surface first, then use the sequence that suits it. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection of every surface and its condition
- Masking and furniture shifting
- Surface-specific pad and compound selection
- Grinding where lippage or deep damage exists
At a glance
- One team, all surfaces
- Written rates
- Klindex & Taski
A real before and after photo is added here for the strongest result.
What is included in etching marble repair
- Masking and furniture shifting
- Surface-specific pad and compound selection
- Grinding where lippage or deep damage exists
- Polishing to one consistent gloss level
- Stain and residue treatment
- Optional sealing, silicate, crystallisation or nano
- Wash-down and walkthrough
- Free inspection of every surface and its condition
What each surface needs
| Surface | Process | Result |
|---|---|---|
| Marble | Grind, hone, polish | Satin to mirror gloss |
| Granite | Granite pad buff and seal | Deep lustre |
| Tile and vitrified | Scrub, refine, optional seal | Even clean finish |
| Wood | Sanding and PU or oil finish | Restored grain and sheen |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection of all surfaces (free)
- Masking and preparation
- Surface-by-surface cleaning and grinding
- Polishing to the agreed gloss on each surface
- Sealing option and handover
Etching Marble Repair rates in Delhi NCR
| Work | Guide band | Typical case |
|---|---|---|
| Buff or maintenance polish | Rs 5-15 per sq ft | Sound floors, light dulling |
| Diamond polishing | Rs 15-25 per sq ft | Scratch lanes, worn gloss |
| Deep polishing with grinding | Rs 25-35 per sq ft | Lippage, stains, heavy wear |
| Coatings | Quoted after inspection | Silicate, crystallisation, nano |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Buff or full polish? A straight answer
| Condition of the floor | Correct job | Why |
|---|---|---|
| Dull but even, no scratches | Buff only | Surface is sound, only the sheen is lost |
| Light scratches and lane wear | Diamond polish | Surface layer needs refining |
| Visible lippage or deep scratches | Grinding plus polish | Buffing cannot level stone |
| Wax or polish residue build-up | Strip, then polish | New finish will not bond over residue |
Buffing is the cheaper option and we will tell you when it is enough. Selling a full polish for a floor that only needed a buff is how a contractor gets a bad name.
The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.
Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.
Why clients book us
- One crew for marble, granite, tile, terrazzo and wood
- Correct pads per surface, because one set does not suit all
- Rate fixed in writing before work starts
- Klindex and Taski machines with fresh diamond segments
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Etching Marble Repair - common questions
Can you polish different floor types in one visit?
Yes. We inspect each surface and use its own pad sequence and compounds. Doing them together is also cheaper than booking separate contractors for each room.
How do you decide between buffing, polishing and grinding?
Buffing suits a sound floor with light dullness, polishing handles scratch lanes and worn gloss, and grinding is needed where slabs are uneven or deeply damaged. The free inspection decides which is genuinely required.
Is the rate the same for every surface?
No. Harder and more damaged surfaces take longer, so rates vary by stone type and condition. You get one written rate per surface before we start.
Can we stay in the house while work is going on?
Yes. We work room by room, mask edges and leave dry walking paths, so the house stays usable throughout.
How do I know if buffing is enough?
If the floor is evenly dull with no visible scratch pattern, a buff usually restores it. If you can see lanes, scratches or a step between slabs, it needs polishing or grinding, and we show you why on a test patch.
Is buffing a waste of money then?
Not at all. It is the correct maintenance step for a sound floor and costs a fraction of a full job. It becomes a waste only when the surface damage needs something deeper.
Can you do a test patch first?
Yes, on every job. One tile or a corner, so you judge the actual result before committing to the whole floor.