Wood Cleaning in Delhi NCR
A wooden floor does not fade from use alone; it dries out in summer and swells in the monsoon, and the finish wears in the walking lanes first. Sanding back to bare wood, filling the gaps and rebuilding the surface is what brings it back. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection and test patch on a hidden area
- Acid-proof masking of walls, skirting and fittings
- Damage correction by grinding where required
- Progressive diamond polishing at controlled speed
At a glance
- Dust-controlled
- Gap filling
- PU / melamine / oil
A real before and after photo is added here for the strongest result.
What is included in wood cleaning company
- Acid-proof masking of walls, skirting and fittings
- Damage correction by grinding where required
- Progressive diamond polishing at controlled speed
- Grey mop haze and residue stripping
- Stain treatment for tea, oil and hard water
- Optional sealer, silicate or nano coating
- Gloss and whiteness checked with you
- Free inspection and test patch on a hidden area
What each surface needs
| Problem | Cause | Fix |
|---|---|---|
| Grey overall haze | Mop residue and soap film | Strip, then polish |
| Dull traffic lanes | Surface wear in walkways | Diamond polish those lanes to match |
| Yellow or brown patches | Oil, rust or water seepage | Poultice, then polish |
| White etch marks | Acid or lemon contact | Fine grind and re-polish |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and test patch (free)
- Masking with acid-proof covering
- Residue stripping and stain treatment
- Progressive diamond polishing
- Handover with a whiteness comparison
Wood Cleaning Company rates in Delhi NCR
| Work | Guide band | Typical case |
|---|---|---|
| Maintenance polish | Rs 5-15 per sq ft | Light dulling |
| Diamond polish | Rs 15-25 per sq ft | Haze and scratch lanes |
| Deep polish with correction | Rs 25-35 per sq ft | Etching, patches, heavy wear |
| Sealer or coating | Quoted after inspection | Kitchens, entries |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Marble and granite need different treatment
| Marble | Granite | |
|---|---|---|
| Hardness | Softer, scratches more visibly | Harder, resists scratches |
| Acid | Etches immediately, never use | Dulls the surface, avoid |
| Finishing | Diamond pads up to 3000 grit | Its own pad set and compounds |
| Typical aftercare | Sealer every 12-24 months | Sealer on kitchen and stairs |
| Gloss achievable | Very high on hard whites | Deep lustre, not mirror |
We keep separate pad sets and compounds for each, because using marble products on granite (or the reverse) is the fastest way to end up with a hazy surface.
Machines are matched to the job. A 400 mm single-disc machine for open floors, edge machines for skirtings and staircases, and hand blocks for corners and thresholds where a machine cannot safely reach.
Waste is removed the same day. Slurry, stripped residue, used pads and packaging leave with the crew instead of going into society bins or being left for you to dispose of.
Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.
Why clients book us
- Whiteness and gloss compared before and after
- Crystallisation, silicate and nano options offered honestly
- 12 years of white marble work in Delhi NCR
- No acid on calcite stone at any stage
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Wood Cleaning Company - common questions
Can yellow stains be removed?
Surface yellowing from polish residue or hard water lifts during polishing. Yellowing caused by water seepage from below, or inside a resin-filled slab, cannot be polished out, and we test a patch to show you which type you have.
Will polishing make it whiter than new?
No. It restores the stone to its clean colour by removing the dulled and stained top layer. We compare whiteness before and after so you can see the real change.
How do I keep it white afterwards?
Use only pH-neutral cleaner with clean water, never acid or bleach, and dry promptly. Sealing in entry areas helps stop grime soaking into the surface.
Why does white marble go grey?
Almost always residue and wear, not the stone itself. Soap film, mop haze and surface scratches scatter light, which reads as grey. Stripping and polishing restores the original tone.
Can you polish a floor that mixes marble and granite?
Yes, and it is common in lobbies and staircases. Each surface is polished to a matching level of sheen rather than the same pad sequence, so the two read as one floor.
Is granite easier to maintain than marble?
It is less acid-sensitive and harder, so it stains and scratches less. It still dulls from repeated wrong cleaning, and it still needs sealing in wet or greasy areas.
Why does marble etch while granite does not?
Marble is calcium-based, so acid dissolves the surface and leaves a white mark. Granite is silicate-based and resists acid better, though strong acid still dulls its polish.