White Emperador Marble in Delhi NCR
Stone floors collect a layer that mopping cannot remove: cleaning residue, soap film and mineral deposit. It looks like dull stone but it is actually surface build-up, and stripping it is the first step before any polishing. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection including slab-thickness and hollow check
- Masking and furniture protection
- Grinding where lippage or deep scratches exist
- Graded diamond polishing to the stone hardness
At a glance
- pH-neutral products
- Residue stripping
- Polishing included
A real before and after photo is added here for the strongest result.
What is included in white emperador marble polishing
- Grinding where lippage or deep scratches exist
- Graded diamond polishing to the stone hardness
- Old polish and wax residue removal
- Stain treatment for oil, rust and hard water
- Silicate or crystallisation option
- Wash-down and walkthrough
- Free inspection including slab-thickness and hollow check
- Masking and furniture protection
What each surface needs
| Stone | Hardness | Best finish |
|---|---|---|
| Makrana white | Medium-hard, takes high gloss | Mirror gloss |
| Katni and Jaisalmer | Softer, colour sensitive | Satin to medium gloss |
| Rajnagar and green marble | Hard, banded | Gloss with even banding |
| Kota and other flagstone | Hard, matte by nature | Densified gloss or matte |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and slab check (free)
- Masking and preparation
- Grinding if lippage or residue is present
- Diamond polishing matched to stone hardness
- Handover with gloss check and care advice
White Emperador Marble Polishing rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Buff and polish | Rs 5-15 per sq ft | Light dullness |
| Diamond polishing | Rs 15-25 per sq ft | Scratches, dull lanes |
| Grinding plus deep polish | Rs 25-35 per sq ft | Lippage, heavy wear |
| Silicate or coating | Quoted after inspection | Longer gloss life |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Marble and granite need different treatment
| Marble | Granite | |
|---|---|---|
| Hardness | Softer, scratches more visibly | Harder, resists scratches |
| Acid | Etches immediately, never use | Dulls the surface, avoid |
| Finishing | Diamond pads up to 3000 grit | Its own pad set and compounds |
| Typical aftercare | Sealer every 12-24 months | Sealer on kitchen and stairs |
| Gloss achievable | Very high on hard whites | Deep lustre, not mirror |
We keep separate pad sets and compounds for each, because using marble products on granite (or the reverse) is the fastest way to end up with a hazy surface.
Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Quality is checked twice: once mid-job, when the first section is finished and you can see the achievable gloss, and once at handover when the whole surface should read evenly under daylight and under your own lighting.
Why clients book us
- 12 years of Indian marble and stone work in Delhi NCR
- Slab thickness and hollowness checked before any grinding
- Residue stripped so the new finish bonds to stone, not to old wax
- Correct grit sequence per stone hardness
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
White Emperador Marble Polishing - common questions
Can old polish and wax be removed?
Yes. Grinding strips the residue layer completely. That is the only way a new polish bonds to the stone instead of sitting on top of old compound.
Will grinding change the colour of my floor?
It restores the original colour by removing the worn and stained top layer. Floors that have faded unevenly across rooms come back to one uniform shade.
How long does it take?
Most apartments are ground and polished in one to two days, and the floor is walkable the same evening as the final pass.
Do you polish Makrana that has gone grey?
Yes. Greyness is normally surface dirt, mop haze and worn polish. It lifts with grinding and polishing, and we show you a test patch on a hidden corner first.
Does Indian marble need the same treatment as Italian marble?
No. Indian marbles such as Makrana, Katni and Rajnagar are generally harder and less acid-sensitive. They take a different grit sequence and more grinding pressure, but the same acid-free cleaning discipline still applies.
Can you polish a floor that mixes marble and granite?
Yes, and it is common in lobbies and staircases. Each surface is polished to a matching level of sheen rather than the same pad sequence, so the two read as one floor.
Is granite easier to maintain than marble?
It is less acid-sensitive and harder, so it stains and scratches less. It still dulls from repeated wrong cleaning, and it still needs sealing in wet or greasy areas.
Why does marble etch while granite does not?
Marble is calcium-based, so acid dissolves the surface and leaves a white mark. Granite is silicate-based and resists acid better, though strong acid still dulls its polish.