Wall Cladding Stone Polishing Cladding Stone Polishing in Delhi NCR
Dull cladding makes an entire elevation look tired. Cleaning away the deposit first, then polishing, restores the colour and stops the facade reading as unfinished. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection of deposit type and stone condition
- Protection of adjacent surfaces and flooring
- Cleaning of pollution and hard-water deposit
- Vertical polishing with matched pads
At a glance
- Vertical polishing
- Deposit removed first
- Sealing option
A real before and after photo is added here for the strongest result.
What is included in wall cladding stone polishing
- Vertical polishing with matched pads
- Stain treatment for rust and run-off marks
- Joint and anchor-point clean-up
- Sealing option for exposed elevations
- Inspection with you at height-accessible points
- Free inspection of deposit type and stone condition
- Protection of adjacent surfaces and flooring
- Cleaning of pollution and hard-water deposit
What each surface needs
| Surface | Process | Result |
|---|---|---|
| Marble cladding | Clean, polish, optional sealer | Colour and sheen restored |
| Granite cladding | Clean and buff | Even lustre |
| Sandstone facade | Gentle clean, seal | Stain resistance improved |
| Reception and feature walls | Polish and seal | Showpiece finish |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and test patch (free)
- Protection of floors and adjacent surfaces
- Deposit and pollution removal
- Vertical polishing and stain treatment
- Sealing option and handover
Wall Cladding Stone Polishing rates in Delhi NCR
| Work | Pricing | Notes |
|---|---|---|
| Cladding cleaning and buff | Per sq ft | Access dependent |
| Vertical polishing | Per sq ft | Requires scaffold or rope access |
| Stain and rust treatment | Quoted per area | Run-off and anchor marks |
| Sealing | Per sq ft | Exposed elevations |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Booking, access and scheduling
- Inspection booked within 24-48 hours; the written quote follows the same visit
- Work usually starts within a week of approval, sooner if you are flexible on dates
- Society gate, lift, parking and working-hour rules arranged before the crew arrives
- Water point, power and work area confirmed at booking so setup takes minutes
- Occupied premises are done room by room or after hours, at no surprise premium
| Job size | Typical duration |
|---|---|
| Bathroom or kitchen | Same day |
| Single room | One working day |
| Full 2-3 BHK | One to two days |
| Lobby or commercial floor | Phased, often overnight |
Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.
The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.
Why clients book us
- Access method agreed before quoting so there are no surprises
- Test patch on a hidden section first
- Deposit removed before polishing, never polished over
- Sealing recommended for road-facing elevations
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Wall Cladding Stone Polishing - common questions
Can polished cladding be restored without removing it?
Yes. Vertical polishing is done in place. Only where panels are loose, cracked or hollow does removal and re-fixing become necessary, and we check that during inspection.
What causes the white streaks on cladding?
Mostly hard-water and cement run-off from slabs, plus pollution deposit. It can be removed with the correct poultice or cleaner; acid is not safe on marble and limestone cladding.
Do you provide access equipment?
We quote access separately because it depends on height and building rules. For high elevations, rope access or scaffolding is arranged before the polish.
How long does cladding stay clean?
Sealed stone stays clean noticeably longer. Road-facing elevations may need cleaning every 12-18 months regardless of sealing.
How far in advance should I book?
A week is comfortable. During festival and wedding season, two weeks is safer because crews are booked out for hotel and banquet work.
What access do you need?
A water point, a working power socket, and a clear route for the machines. Society permission for lift use is helpful for upper floors.
Can the job be split across weekends?
Yes. Many clients do one or two rooms each weekend. We keep the same rate per sq ft and you are not billed twice for travel within the same batch.