Stone Cladding Polishing Cladding Stone Polishing in Delhi NCR
Dull cladding makes an entire elevation look tired. Cleaning away the deposit first, then polishing, restores the colour and stops the facade reading as unfinished. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection of deposit type and stone condition
- Protection of adjacent surfaces and flooring
- Cleaning of pollution and hard-water deposit
- Vertical polishing with matched pads
At a glance
- Vertical polishing
- Deposit removed first
- Sealing option
A real before and after photo is added here for the strongest result.
What is included in stone cladding polishing 2
- Free inspection of deposit type and stone condition
- Protection of adjacent surfaces and flooring
- Cleaning of pollution and hard-water deposit
- Vertical polishing with matched pads
- Stain treatment for rust and run-off marks
- Joint and anchor-point clean-up
- Sealing option for exposed elevations
- Inspection with you at height-accessible points
What each surface needs
| Surface | Process | Result |
|---|---|---|
| Marble cladding | Clean, polish, optional sealer | Colour and sheen restored |
| Granite cladding | Clean and buff | Even lustre |
| Sandstone facade | Gentle clean, seal | Stain resistance improved |
| Reception and feature walls | Polish and seal | Showpiece finish |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and test patch (free)
- Protection of floors and adjacent surfaces
- Deposit and pollution removal
- Vertical polishing and stain treatment
- Sealing option and handover
Stone Cladding Polishing 2 rates in Delhi NCR
| Work | Pricing | Notes |
|---|---|---|
| Cladding cleaning and buff | Per sq ft | Access dependent |
| Vertical polishing | Per sq ft | Requires scaffold or rope access |
| Stain and rust treatment | Quoted per area | Run-off and anchor marks |
| Sealing | Per sq ft | Exposed elevations |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Tiles or marble: what each one needs
| Tiles (vitrified, ceramic) | Marble | |
|---|---|---|
| What dulls | Surface residue and micro-scratches | Worn polished layer, etching |
| Restoring it | Deep clean, surface refine | Grinding and diamond polishing |
| Staining | Grout lines first | Stone surface and joints |
| Slip risk | High on glossy tile when wet | High on mirror-polished stone |
| Best finish for wet areas | Clean plus anti-skid | Satin plus anti-skid |
In most homes both are present in the same flat, which is why we quote surface by surface instead of giving one blended rate.
Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.
The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.
Why clients book us
- Test patch on a hidden section first
- Deposit removed before polishing, never polished over
- Sealing recommended for road-facing elevations
- 12 years of stone work including cladding and feature walls in Delhi NCR
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Stone Cladding Polishing 2 - common questions
What causes the white streaks on cladding?
Mostly hard-water and cement run-off from slabs, plus pollution deposit. It can be removed with the correct poultice or cleaner; acid is not safe on marble and limestone cladding.
Do you provide access equipment?
We quote access separately because it depends on height and building rules. For high elevations, rope access or scaffolding is arranged before the polish.
How long does cladding stay clean?
Sealed stone stays clean noticeably longer. Road-facing elevations may need cleaning every 12-18 months regardless of sealing.
Can polished cladding be restored without removing it?
Yes. Vertical polishing is done in place. Only where panels are loose, cracked or hollow does removal and re-fixing become necessary, and we check that during inspection.
Can tiles be polished like marble?
Tiles are refined and cleaned, not ground like stone. Polishing a vitrified tile past its factory finish wears the surface, so we clean and seal instead, or polish only where the tile type allows it.
Which is better for a bathroom floor?
Neither should be mirror-glossy when wet. Tile with anti-skid treatment, or honed stone with anti-skid, is the safer and more practical choice.
Do floors with both need separate visits?
No. One crew handles tiles, grout and stone in the same visit, which also avoids the joint line between two trades becoming anyone's excuse.