Silicate Marble Polishing in Vikramshila
Silicate treatment is what gives marble a wet, deep gloss instead of a thin surface shine. The chemical reacts with the calcium in the stone and hardens the top layer, so the finish holds through mopping and footfall far longer than plain polishing. Work in Vikramshila is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos.
- Free inspection of porosity and stain history
- Deep cleaning before sealing (sealer over dirt seals dirt)
- Drying time allowed, no sealing on damp stone
- Impregnating sealer applied evenly
At a glance
- Sil200 / Sil800
- Wet-look gloss
- Applied after polishing
A real before and after photo is added here for the strongest result.
What is included in silicate marble polishing
- Drying time allowed, no sealing on damp stone
- Impregnating sealer applied evenly
- Second coat on high-absorption stone
- Buffer and residue removal
- Wet-area and kitchen priority treatment
- Maintenance and re-seal schedule explained
- Free inspection of porosity and stain history
- Deep cleaning before sealing (sealer over dirt seals dirt)
What each surface needs
| Stone | Absorption | Seal priority |
|---|---|---|
| Marble | Medium, acid and oil sensitive | Kitchens, entries, washbasins |
| Limestone | High | All wet areas |
| Granite | Low | Kitchen platforms, stairs |
| Travertine | High, pitted | Bathrooms, outdoors |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and porosity test (free)
- Deep cleaning and residue removal
- Full drying of the stone surface
- Sealer applied in even coats
- Buffing, handover and re-seal schedule
Silicate Marble Polishing rates in Vikramshila
| Work | Guide band | Notes |
|---|---|---|
| Clean and seal | Rs 5-15 per sq ft | Dry floors and walls |
| Strip, clean and seal | Rs 15-25 per sq ft | Old coating present |
| High-absorption stone, two coats | Quoted after inspection | Limestone and travertine |
| Re-seal cycle | Per sq ft | Every 12-24 months |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
How our charges are built
| Charge component | What it covers | How it varies |
|---|---|---|
| Rate per sq ft | Cleaning, grinding, polishing, finishing | Surface type and area |
| Damage correction | Scratch, etch and stain treatment | Severity, decided on the test patch |
| Access and edges | Staircases, corners, upper floors | Hand work needed |
| Coatings | Silicate, crystallisation, nano, sealer | Optional, quoted separately |
- Nothing is added mid-job. If we find something the inspection could not show, we stop and re-quote with you
- Material is included in the rate, not billed as an extra
- Slab rates apply above 1,000 sq ft instead of per-room pricing
- One written figure per surface, so a mixed floor is priced line by line
Team composition is consistent: a supervisor plus two machine operators on standard jobs, with additional hands for staircases, multiple floors or tight access. The same supervisor stays with the job start to finish.
Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.
Timing is agreed before the crew arrives: arrival window, the room sequence and the handover time are confirmed in writing, so nobody is waiting around or guessing when the floor will be free.
Why clients book us
- Impregnating sealers used, not film coatings
- Honest about what sealing does and does not do
- Re-seal cycle scheduled so protection never lapses
- 12 years of stone care
Serving Vikramshila and nearby areas
Vikramshila jobs are booked as a fixed visit batch, so travel is planned into the date instead of being added as a surprise. Work in Vikramshila is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Silicate Marble Polishing - common questions
Will sealing make my marble stain-proof?
No, and any contractor saying that is overselling. Sealing buys you time to wipe a spill. Lemon juice or oil left overnight can still mark sealed stone.
How often should stone be re-sealed?
Every twelve to twenty-four months for working areas like kitchens, entries and washbasins. Dry bedroom floors and walls hold sealer much longer.
Can sealer be applied over an old polish?
No. It will not bond, and it traps the old residue underneath. Cleaning or stripping first is part of the job, not an optional extra.
Does sealing change the colour?
Impregnating sealers are colourless. If a sealer darkens the stone, it is a film-forming product rather than an impregnator, which is a different finish choice.
Are there extra charges on top of the quoted rate?
No, provided the scope does not change. The rate covers preparation, products, machines and clean-up. Coatings and slab repairs are the only optional items, and they are listed separately in the written quote.
Do you charge for travel?
Travel is covered within the quoted rate for addresses in our service cities. For outlying areas we tell you the travel component upfront rather than adding it at handover.
What if the work needs more time than estimated?
That is our risk, not yours. The rate is per sq ft for the agreed scope, so a slow patch or a stubborn stain does not increase your bill.