Silicate Marble Polishing in Shillong
If your polished floor looks bright but shallow, silicate is usually the missing step. It is applied after diamond polishing and bonds with the stone surface, deepening the gloss and slowing down how fast it dulls. Work in Shillong is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos.
- Photographed damage map and gloss reading
- Test patch on a hidden area before full approval
- Acid-proof masking of skirting, walls and fittings
- Sequential diamond passes at controlled speed
At a glance
- Sil200 / Sil800
- Wet-look gloss
- Applied after polishing
A real before and after photo is added here for the strongest result.
What is included in silicate marble polishing
- Photographed damage map and gloss reading
- Test patch on a hidden area before full approval
- Acid-proof masking of skirting, walls and fittings
- Sequential diamond passes at controlled speed
- Vein-safe polishing and hand-finished edges
- pH-neutral deep clean before finishing
- Sealer, silicate or nano coating on request
- Written after-care rules for the first month
What each surface needs
| Marble | Character | What to watch for |
|---|---|---|
| Statuario | White with bold grey veining | Etches fast, needs prompt spill control |
| Carrara | Soft white, subtle grey | Softer stone, dulls quickly in entries |
| Calacatta | Warm white with gold veins | Needs gentle pads to avoid vein bleeding |
| Perlatino and Botticino | Warm beige with fine veins | Yellowing if filled slabs are over-polished |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Identify the marble type and check for resin filling (free)
- Masking with acid-proof covering
- Diamond passes at controlled speed, 30-45 minutes per 100 sq ft
- Polish to the agreed gloss, then seal or coat if required
- Before and after comparison plus a list of products never to use
Silicate Marble Polishing rates in Shillong
| Work | Guide band | Typical case |
|---|---|---|
| Maintenance polish | Rs 5-15 per sq ft | Light dulling, sound floor |
| Diamond polish to restore gloss | Rs 15-25 per sq ft | Traffic lanes, mop haze |
| Deep polish with crystallisation | Rs 25-35 per sq ft | Heavy wear, etching, patchiness |
| Sealing or nano coating | Quoted after inspection | Kitchens, entries, high traffic |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Keeping the finish after the job is done
| Habit | Why it matters |
|---|---|
| Dry dust mopping | Removes grit before it scratches the surface |
| pH-neutral cleaner only | Acid etches marble and bleach dulls the finish |
| Damp mop, never flooding | Standing water leaves marks and weakens joints |
| Mats at entries | Captures grit where it enters |
| Felt pads under furniture | Stops drag marks on polished surfaces |
- A light maintenance polish every 12-18 months keeps gloss without a full job
- Commercial floors are usually re-polished annually, homes every two years
- Sealer or nano coating, where applied, is refreshed on the schedule we hand over
Timing is agreed before the crew arrives: arrival window, the room sequence and the handover time are confirmed in writing, so nobody is waiting around or guessing when the floor will be free.
Quality is checked twice: once mid-job, when the first section is finished and you can see the achievable gloss, and once at handover when the whole surface should read evenly under daylight and under your own lighting.
Nothing is hidden behind a shine. Where a surface has damage that polishing cannot correct, we mark it during inspection and put it in writing, so expectations are set before work starts rather than argued over afterwards.
Why clients book us
- Acid-free discipline: our crews never reach for the acid bottle on calcite stone
- Lower heat and pressure on resin-filled slabs to prevent yellowing
- One gloss standard across the whole floor, no patch looks newer
- Silicate, epoxy and Akemi nano products in stock
Serving Shillong and nearby areas
Shillong jobs are booked as a fixed visit batch, so travel is planned into the date instead of being added as a surprise. Work in Shillong is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Silicate Marble Polishing - common questions
Why does Italian marble dull faster than Indian marble?
It is usually the cleaning, not the stone. White imported marbles are calcium-based, so acidic cleaners and lemon juice etch the surface and leave white patches within days. A pH-neutral cleaner and clean-water mopping solves most of it.
Will polishing change the pattern?
No. Diamond polishing removes the damaged top layer; it does not bleach or alter the veining. On filled slabs we work at lower speed specifically to avoid yellowing.
Can yellowed Italian marble be corrected?
Polish residue and hard-water film lift during diamond polishing. Yellowing inside a filled slab is internal and cannot be polished out, so we test a patch and tell you the realistic outcome first.
How often does it need polishing?
Homes every 18-24 months with neutral cleaning. Lobbies, showrooms and entries every 8-12 months, longer with a sealer or nano coating.
Is a sealer worth it?
Yes in working areas. It slows absorption of oil, tea and coloured liquids, which buys time to wipe a spill, and needs refreshing every 12-24 months.
How often does the floor need a maintenance polish?
Every 12-18 months for homes and every 8-12 months for commercial floors. It is a much smaller job than the original restoration.
Which cleaner should we use?
A pH-neutral stone cleaner with clean water, dried after mopping. Avoid acid, bleach and abrasive powders, which are the main causes of dull and etched floors.
Can maintenance work be done room by room?
Yes. We schedule it in sections so the house stays usable, and it takes a fraction of the time of a full polish.