Silicate Marble Polishing in Itanagar
If your polished floor looks bright but shallow, silicate is usually the missing step. It is applied after diamond polishing and bonds with the stone surface, deepening the gloss and slowing down how fast it dulls. Work in Itanagar is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos.
- Free inspection and test patch on a hidden area
- Acid-proof masking of walls, skirting and fittings
- Damage correction by grinding where required
- Progressive diamond polishing at controlled speed
At a glance
- Sil200 / Sil800
- Wet-look gloss
- Applied after polishing
A real before and after photo is added here for the strongest result.
What is included in silicate marble polishing
- Free inspection and test patch on a hidden area
- Acid-proof masking of walls, skirting and fittings
- Damage correction by grinding where required
- Progressive diamond polishing at controlled speed
- Grey mop haze and residue stripping
- Stain treatment for tea, oil and hard water
- Optional sealer, silicate or nano coating
- Gloss and whiteness checked with you
What each surface needs
| Problem | Cause | Fix |
|---|---|---|
| Grey overall haze | Mop residue and soap film | Strip, then polish |
| Dull traffic lanes | Surface wear in walkways | Diamond polish those lanes to match |
| Yellow or brown patches | Oil, rust or water seepage | Poultice, then polish |
| White etch marks | Acid or lemon contact | Fine grind and re-polish |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and test patch (free)
- Masking with acid-proof covering
- Residue stripping and stain treatment
- Progressive diamond polishing
- Handover with a whiteness comparison
Silicate Marble Polishing rates in Itanagar
| Work | Guide band | Typical case |
|---|---|---|
| Maintenance polish | Rs 5-15 per sq ft | Light dulling |
| Diamond polish | Rs 15-25 per sq ft | Haze and scratch lanes |
| Deep polish with correction | Rs 25-35 per sq ft | Etching, patches, heavy wear |
| Sealer or coating | Quoted after inspection | Kitchens, entries |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Keeping the finish after the job is done
| Habit | Why it matters |
|---|---|
| Dry dust mopping | Removes grit before it scratches the surface |
| pH-neutral cleaner only | Acid etches marble and bleach dulls the finish |
| Damp mop, never flooding | Standing water leaves marks and weakens joints |
| Mats at entries | Captures grit where it enters |
| Felt pads under furniture | Stops drag marks on polished surfaces |
- A light maintenance polish every 12-18 months keeps gloss without a full job
- Commercial floors are usually re-polished annually, homes every two years
- Sealer or nano coating, where applied, is refreshed on the schedule we hand over
Weight and load matter on upper floors and terraces. Where a slab has been laid over a void or a lightweight screed, we reduce machine weight and speed rather than risk cracking the base.
Team composition is consistent: a supervisor plus two machine operators on standard jobs, with additional hands for staircases, multiple floors or tight access. The same supervisor stays with the job start to finish.
The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.
Why clients book us
- 12 years of white marble work
- No acid on calcite stone at any stage
- Test patch shown before full commitment
- Whiteness and gloss compared before and after
Serving Itanagar and nearby areas
Itanagar jobs are booked as a fixed visit batch, so travel is planned into the date instead of being added as a surprise. Work in Itanagar is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Silicate Marble Polishing - common questions
Can yellow stains be removed?
Surface yellowing from polish residue or hard water lifts during polishing. Yellowing caused by water seepage from below, or inside a resin-filled slab, cannot be polished out, and we test a patch to show you which type you have.
Will polishing make it whiter than new?
No. It restores the stone to its clean colour by removing the dulled and stained top layer. We compare whiteness before and after so you can see the real change.
How do I keep it white afterwards?
Use only pH-neutral cleaner with clean water, never acid or bleach, and dry promptly. Sealing in entry areas helps stop grime soaking into the surface.
Why does white marble go grey?
Almost always residue and wear, not the stone itself. Soap film, mop haze and surface scratches scatter light, which reads as grey. Stripping and polishing restores the original tone.
How often does the floor need a maintenance polish?
Every 12-18 months for homes and every 8-12 months for commercial floors. It is a much smaller job than the original restoration.
Which cleaner should we use?
A pH-neutral stone cleaner with clean water, dried after mopping. Avoid acid, bleach and abrasive powders, which are the main causes of dull and etched floors.
Can maintenance work be done room by room?
Yes. We schedule it in sections so the house stays usable, and it takes a fraction of the time of a full polish.