Silicate Marble Polishing in Aurangabad
Silicate treatment is what gives marble a wet, deep gloss instead of a thin surface shine. The chemical reacts with the calcium in the stone and hardens the top layer, so the finish holds through mopping and footfall far longer than plain polishing. Work in Aurangabad is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos.
- Gloss reading and patchiness mapping
- Diamond polishing to prepare the surface
- Crystallisation applied in sections with a steel-wool pad under machine
- Even working to avoid swirl marks
At a glance
- Sil200 / Sil800
- Wet-look gloss
- Applied after polishing
A real before and after photo is added here for the strongest result.
What is included in silicate marble polishing
- Even working to avoid swirl marks
- Second pass on high-traffic routes
- Residue buffed off and floor washed
- Walkway protection until dry
- Gloss check with you
- Gloss reading and patchiness mapping
- Diamond polishing to prepare the surface
- Crystallisation applied in sections with a steel-wool pad under machine
What each surface needs
| Area | Why crystallise | Expected life |
|---|---|---|
| Lobby and reception | Constant footfall and trolley traffic | 12-24 months |
| Showroom and retail | Scuffing and display lighting | 12-18 months |
| Staircases | Edge wear and heel marks | 12-18 months |
| Homes with pets | Claw marks and repeated mopping | 18-24 months |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and gloss reading (free)
- Diamond polishing to level the surface
- Crystallisation worked in section by section
- Second pass on heavy-traffic lanes
- Residue removal, wash-down and handover
Silicate Marble Polishing rates in Aurangabad
| Work | Guide band | Notes |
|---|---|---|
| Polish plus light crystallisation | Rs 15-25 per sq ft | Homes, moderate traffic |
| Full crystallisation with deep polish | Rs 25-35 per sq ft | Lobbies, showrooms, heavy traffic |
| Crystallisation only | Quoted after inspection | Floor must already be sound |
| Repeat maintenance | Quoted after inspection | 12-24 months |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Reading a per sq ft quote correctly
- Ask whether grinding is included or quoted separately, because that is the single biggest swing in the number
- Ask what the rate excludes: coatings, crack filling, slab replacement and waste removal are the usual extras
- Check whether the area is charged on carpet area or built-up area, and whether staircases are priced per step
- Confirm the rate applies to the measured floor, not an estimate from photographs
- Insist on one written figure per surface where floors are mixed
| Rate band | Typical work included |
|---|---|
| Lowest band | Maintenance buff on a sound floor |
| Middle band | Diamond polishing, scratch and lane correction |
| Upper band | Grinding, deep correction, crystallisation or coating |
Two quotes can differ by 40 percent for the same floor simply because one includes grinding and the other does not. Compare the scope, not just the number.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Protection is planned, not improvised. Furniture is moved to one side and covered, curtain hems are lifted, and a walking route is kept clear throughout so the household can still move around.
Access is confirmed before the visit: parking, lift use, gate entry, working-hour restrictions and any society paperwork. Sorting this in advance is what stops a scheduled job from becoming a wasted trip.
Why clients book us
- 12 years of marble finishing
- Applied only after proper diamond polishing
- Swirl marks removed before handover
- Suitable for marble, terrazzo and most calcite stone
Serving Aurangabad and nearby areas
Aurangabad jobs are booked as a fixed visit batch, so travel is planned into the date instead of being added as a surprise. Work in Aurangabad is planned as a scheduled visit: the crew and machines travel together on a fixed date, and the rate is written down after the floor is seen in person or from clear photos. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Silicate Marble Polishing - common questions
Will it make the floor slippery?
A crystallised surface is smooth and reflective, so wet areas need care. In bathrooms and on stairs we recommend a satin finish with anti-skid treatment instead.
How long does it last?
Twelve to twenty-four months depending on traffic. Lobbies are usually re-treated annually, homes every two years.
Can it be done on a scratched floor?
It should not be. Crystallising a scratched surface sets the scratches in. We polish first, and if the damage is deep we recommend grinding.
What is the difference between crystallisation and silicate?
Crystallisation builds a harder, glassier surface layer and suits heavy footfall. Silicate gives a wetter, deeper gloss and is gentler on the stone. Many projects use silicate for homes and crystallisation for lobbies.
Why do per sq ft rates differ so much between contractors?
Almost always scope. A rate that excludes grinding, crack filling and coatings looks cheaper until those are added. Ask for the scope in writing and compare the total, not the headline rate.
Is the rate cheaper for larger areas?
Yes. Above roughly 1,000 sq ft we move to slab rates because setup and travel are spread over more work.
How do you measure the area?
On site, with you present, room by room. You see the measurement sheet before the quote is finalised.