Natural Stone Cladding Polishing Cladding Stone Polishing in Delhi NCR
Dull cladding makes an entire elevation look tired. Cleaning away the deposit first, then polishing, restores the colour and stops the facade reading as unfinished. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection of deposit type and stone condition
- Protection of adjacent surfaces and flooring
- Cleaning of pollution and hard-water deposit
- Vertical polishing with matched pads
At a glance
- Vertical polishing
- Deposit removed first
- Sealing option
A real before and after photo is added here for the strongest result.
What is included in natural stone cladding polishing
- Cleaning of pollution and hard-water deposit
- Vertical polishing with matched pads
- Stain treatment for rust and run-off marks
- Joint and anchor-point clean-up
- Sealing option for exposed elevations
- Inspection with you at height-accessible points
- Free inspection of deposit type and stone condition
- Protection of adjacent surfaces and flooring
What each surface needs
| Surface | Process | Result |
|---|---|---|
| Marble cladding | Clean, polish, optional sealer | Colour and sheen restored |
| Granite cladding | Clean and buff | Even lustre |
| Sandstone facade | Gentle clean, seal | Stain resistance improved |
| Reception and feature walls | Polish and seal | Showpiece finish |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and test patch (free)
- Protection of floors and adjacent surfaces
- Deposit and pollution removal
- Vertical polishing and stain treatment
- Sealing option and handover
Natural Stone Cladding Polishing rates in Delhi NCR
| Work | Pricing | Notes |
|---|---|---|
| Cladding cleaning and buff | Per sq ft | Access dependent |
| Vertical polishing | Per sq ft | Requires scaffold or rope access |
| Stain and rust treatment | Quoted per area | Run-off and anchor marks |
| Sealing | Per sq ft | Exposed elevations |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
How to get a quote that does not change
- WhatsApp photos of the dullest area and the worst stain speed up the first estimate
- A free on-site inspection gives the final figure, because gloss readings and damage depth cannot be judged from a photo
- The written quote lists surface by surface: area, rate, scope and exclusions
- Coatings, crack repairs and slab replacement appear as separate optional lines
- The figure is valid for thirty days unless you ask us to hold it longer
If a contractor quotes a single number for a whole house without inspecting it, that number will change once work starts. We would rather quote after looking.
Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.
The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.
Why clients book us
- 12 years of stone work including cladding and feature walls in Delhi NCR
- Access method agreed before quoting so there are no surprises
- Test patch on a hidden section first
- Deposit removed before polishing, never polished over
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Natural Stone Cladding Polishing - common questions
What causes the white streaks on cladding?
Mostly hard-water and cement run-off from slabs, plus pollution deposit. It can be removed with the correct poultice or cleaner; acid is not safe on marble and limestone cladding.
Do you provide access equipment?
We quote access separately because it depends on height and building rules. For high elevations, rope access or scaffolding is arranged before the polish.
How long does cladding stay clean?
Sealed stone stays clean noticeably longer. Road-facing elevations may need cleaning every 12-18 months regardless of sealing.
Can polished cladding be restored without removing it?
Yes. Vertical polishing is done in place. Only where panels are loose, cracked or hollow does removal and re-fixing become necessary, and we check that during inspection.
Can I get a quote on WhatsApp?
Yes as an indicative band. Send photos in daylight of the dullest area, any stains and one close-up of the surface. The final figure is confirmed after the free on-site inspection.
How long is the quote valid?
Thirty days from the inspection date. Material and product rates move, so we do not hold figures indefinitely, but we will tell you if anything changes.
Is the inspection really free?
Yes. There is no charge for the site visit or the measurement, and no obligation to proceed afterwards.