Mosaic Polishing Mosaic Floor Polishing Delhi NCR
Mosaic and chip floors are unforgiving: the small pieces wear at different rates, so a poorly polished floor looks wavy even when it is clean. Level grinding followed by an even polish is what makes mosaic look sharp again. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection of chip condition and grout lines
- Masking and protection of adjacent surfaces
- Grinding to level the mosaic
- Joint and chip filling
At a glance
- Levelling grind
- Chip repair
- Sealed finish
A real before and after photo is added here for the strongest result.
What is included in mosaic polishing
- Joint and chip filling
- Honing and polishing to even gloss
- Sealer or wax finish
- Edge and corner hand finishing
- Wash-down and handover
- Free inspection of chip condition and grout lines
- Masking and protection of adjacent surfaces
- Grinding to level the mosaic
What each surface needs
| Condition | Process | Result |
|---|---|---|
| Dull, sound mosaic | Light grind and polish | Even medium gloss |
| Loose chips | Re-fix, fill joints, grind | Continuous surface |
| Heavy wax build-up | Grind to chip level, polish | True colours restored |
| High-traffic areas | Grind, polish, seal | Longer holding finish |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and test patch (free)
- Masking and preparation
- Grinding and levelling
- Polishing to agreed gloss
- Sealing and handover
Mosaic Polishing rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Mosaic buffing | Rs 5-15 per sq ft | Light dulling |
| Grinding and polishing | Rs 15-25 per sq ft | Wax build-up, uneven surface |
| Deep restoration | Rs 25-35 per sq ft | Cracks, chips, heavy wear |
| Sealer or wax | Quoted after inspection | Finish choice matters |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
What improves, and what cannot be fixed
| Condition | Realistic outcome |
|---|---|
| Dull, even wear | Full gloss returns, looks new |
| Scratch lanes in walkways | Removed, surface level again |
| Light etching and hard water | Removed with polishing |
| Deep etching or acid burns | Faint mark may remain |
| Cracked or hollow slabs | Needs replacement, not polishing |
| Stains soaked through the slab | Lightened, not erased |
We show you this on a test patch before quoting the full job, so the result you see at handover is the result you were promised.
Every job ends with a walkthrough. You see the gloss reading, the treated patches and the joints before the crew packs up, and the same crew owns any correction needed later.
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Why clients book us
- Test patch shown before committing
- Chip pattern checked for evenness
- 12 years of mosaic and terrazzo work in Delhi NCR
- Loose chips re-fixed before grinding
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Mosaic Polishing - common questions
Can old mosaic look new again?
It can look dramatically better. Grinding levels the chips and polishing restores colour and shine. Chips that are missing or broken can be filled, but exact colour matching on very old mosaic is not always possible.
Is mosaic harder to polish than marble?
It takes longer because the surface has to be levelled across many small pieces, and joints need filling. Expect a slightly higher rate per sq ft.
Will grinding loosen the chips?
Grinding is controlled and wet, and we re-fix any loose chip before starting. Where large areas are already lifting, we tell you before work begins.
How long does the finish last?
Two to three years in homes with a sealer; commercial floors are usually re-polished annually.
Can the floor look exactly new again?
On sound stone with surface wear, yes. Where damage has gone deeper, such as acid burns or stains soaked through the slab, the result is a major improvement rather than perfection, and we tell you which one to expect before starting.
Why do some floors come back brighter than others?
Stone type and previous care. White and hard marbles take a higher gloss; softer or previously acid-washed floors top out lower. Consistent cleaning products are what keep the difference from widening.
Do you guarantee the same result on every surface?
No, and no honest contractor should. A mixed floor gets one uniform gloss level chosen after testing each surface, which sometimes means a satin finish rather than mirror.