Marble & floor polishing - Delhi NCR WhatsApp Request inspection +91 86070 01043 Email

Mosaic Floor Polishing Cost Service in Delhi NCR

Mosaic and chip floors are unforgiving: the small pieces wear at different rates, so a poorly polished floor looks wavy even when it is clean. Level grinding followed by an even polish is what makes mosaic look sharp again. Delhi NCR mixes very old housing ???

  • Free inspection of chip condition and grout lines
  • Masking and protection of adjacent surfaces
  • Grinding to level the mosaic
  • Joint and chip filling
Mosaic Floor Polishing Cost in Delhi NCR Service
Professional equipment Klindex, Taski, diamond pads 60–3000
Diamond technology Graded steps matched to stone
Transparent quotation Written quote after inspection
Comprehensive services Marble, granite, tile & wood
Floor before polishing
Before
Floor after polishing
After

The results speak for themselves

See the difference professional polishing makes

Diamond-grade pads and staged honing restore clarity and slip-safe gloss — without replacing good stone. Every job starts with a test patch so you approve the finish before full-area work.

Our polishing process

1

Inspection

Site visit, moisture and scratch check

2

Grinding

Level uneven areas when required

3

Joint filling

Fill pits and open joints if needed

4

Honing & polishing

Diamond grit sequence to target gloss

5

Final finishing

Silicate, epoxy or nano if quoted

6

Handover

Walk-through and care advice

Related services

Suitable for

ApartmentsVillasOfficesHotelsShowroomsHospitals

Marble polishing services across Delhi NCR

Full service information

Mosaic Floor Polishing · Delhi NCR

Mosaic Floor Polishing Mosaic Floor Polishing Delhi NCR

Mosaic and chip floors are unforgiving: the small pieces wear at different rates, so a poorly polished floor looks wavy even when it is clean. Level grinding followed by an even polish is what makes mosaic look sharp again. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.

  • Free inspection of chip condition and grout lines
  • Masking and protection of adjacent surfaces
  • Grinding to level the mosaic
  • Joint and chip filling

Request a free site check

At a glance

  • Levelling grind
  • Chip repair
  • Sealed finish

A real before and after photo is added here for the strongest result.

What is included in mosaic floor polishing cost

  • Free inspection of chip condition and grout lines
  • Masking and protection of adjacent surfaces
  • Grinding to level the mosaic
  • Joint and chip filling
  • Honing and polishing to even gloss
  • Sealer or wax finish
  • Edge and corner hand finishing
  • Wash-down and handover

What each surface needs

ConditionProcessResult
Dull, sound mosaicLight grind and polishEven medium gloss
Loose chipsRe-fix, fill joints, grindContinuous surface
Heavy wax build-upGrind to chip level, polishTrue colours restored
High-traffic areasGrind, polish, sealLonger holding finish

Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.

How the job runs

  1. Inspection and test patch (free)
  2. Masking and preparation
  3. Grinding and levelling
  4. Polishing to agreed gloss
  5. Sealing and handover

Mosaic Floor Polishing Cost rates in Delhi NCR

WorkGuide bandNotes
Mosaic buffingRs 5-15 per sq ftLight dulling
Grinding and polishingRs 15-25 per sq ftWax build-up, uneven surface
Deep restorationRs 25-35 per sq ftCracks, chips, heavy wear
Sealer or waxQuoted after inspectionFinish choice matters

Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.

What changes the price for mosaic floor polishing cost in Delhi NCR

FactorEffect on rateWhat to expect
Total areaBigger areas cost less per sq ftSlab rates above 1,000 sq ft
Damage depthGrinding raises the rateDecided by the test patch
Stone typeImported and filled slabs take longerSee the surface table
AccessUpper floors and corners take longerConfirmed before booking

Ask for one written rate per surface. A single number for the whole house without an inspection always changes later.

The process, step by step

  1. Site inspection, gloss reading and hidden test patch
  2. Masking of skirting, fittings, doors and furniture edges
  3. Residue and old polish stripping where present
  4. Grinding if lippage or deep damage is found
  5. Progressive polishing through the grit sequence
  6. Optional silicate, crystallisation, epoxy or nano finish
  7. Edge and corner hand work
  8. Wash-down, walkthrough and care guidance

Each stage is completed on the whole area before the next one starts, so the floor never ends up with a bright patch next to an unfinished section.

Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.

The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.

Why clients book us

  • Wax and residue stripped so the new finish bonds
  • Test patch shown before committing
  • Chip pattern checked for evenness
  • 12 years of mosaic and terrazzo work in Delhi NCR

Serving Delhi NCR and nearby areas

Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.

Request a free site check

Mosaic Floor Polishing Cost - common questions

Can old mosaic look new again?

It can look dramatically better. Grinding levels the chips and polishing restores colour and shine. Chips that are missing or broken can be filled, but exact colour matching on very old mosaic is not always possible.

Is mosaic harder to polish than marble?

It takes longer because the surface has to be levelled across many small pieces, and joints need filling. Expect a slightly higher rate per sq ft.

Will grinding loosen the chips?

Grinding is controlled and wet, and we re-fix any loose chip before starting. Where large areas are already lifting, we tell you before work begins.

How long does the finish last?

Two to three years in homes with a sealer; commercial floors are usually re-polished annually.

Is the price negotiable?

The rate per sq ft is not inflated to leave room for haggling. We scope honestly: if the floor needs only a buff, we quote a buff instead of a full diamond job, and tell you when the cheaper option will hold.

Do you take advance payment?

The package is confirmed in writing first. Advance for material is normal on large jobs; the balance is settled after the walkthrough.

How long does each step take?

As a guide, preparation is under an hour, grinding runs 25-40 minutes per 100 sq ft, polishing 15-25 minutes, and finishing plus clean-up about an hour. Bigger areas are scheduled over more days.

Can steps be skipped to save money?

Not safely. Skipping grit stages is the most common shortcut and shows up as scratch haze within weeks. If you want to reduce cost, reduce the area covered this cycle, not the process.

Do you work in one room or the whole floor at a time?

Room by room if you are living in, whole floor if the house is empty, which produces a more even finish because lighting and drying are consistent.

Frequently asked questions

Call or WhatsApp for quick answers about scope, timing and guide rates for this service.

Let's restore your floors

Free inspection · written quote · Delhi NCR