Marble Tile Restoration in Delhi NCR
Some damage will not polish out because it is chemical, not wear. We identify each mark, treat it with the right method, then polish the whole floor back to one even finish. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection and test patch
- Masking of walls, skirting and furniture edges
- Wet sanding through the grit sequence
- Slurry vacuumed as work proceeds
At a glance
- Etch repair
- Poultice treatment
- Colour-matched fills
A real before and after photo is added here for the strongest result.
What is included in marble tile restoration
- Free inspection and test patch
- Masking of walls, skirting and furniture edges
- Wet sanding through the grit sequence
- Slurry vacuumed as work proceeds
- Damage and joint treatment where found
- Polishing after sanding on request
- Wash-down of the whole area
- Care advice for the first week
What each surface needs
| Problem | Wet sanding effect | Outcome |
|---|---|---|
| Grey mop haze | Strips the residue layer | True stone colour returns |
| Old wax and coatings | Fully removed | Surface ready for polish |
| Light scratches | Ground out in stages | Even surface |
| Paint, POP and cement spots | Removed without acid | Clean stone |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and test patch (free)
- Masking and water containment
- Wet sanding in grit stages
- Slurry vacuumed and area washed
- Handover with finish options
Marble Tile Restoration rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Wet sanding only | Rs 5-15 per sq ft | Residue removal |
| Wet sanding plus polishing | Rs 15-25 per sq ft | Dull floors |
| Sanding, grinding and polish | Rs 25-35 per sq ft | Damage and lippage |
| Coating after sanding | Quoted after inspection | Protection |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
What a proper job must include
| Stage | Non-negotiable |
|---|---|
| Before starting | Gloss reading, damage map, hidden test patch, written rate |
| Preparation | Skirting, fittings and furniture edges masked |
| During | Correct pad sequence for the stone, no skipped grits |
| Finishing | Edges and corners hand-done, not left dull |
| Handover | Walkthrough with you, after-care note, waste removed |
Use this list to compare any quote you receive, ours included. If a contractor skips the test patch or the handover walkthrough, the finish will show it within weeks.
Access is confirmed before the visit: parking, lift use, gate entry, working-hour restrictions and any society paperwork. Sorting this in advance is what stops a scheduled job from becoming a wasted trip.
Old polish, wax and cleaning residue are stripped before any new finish goes on. Layering a fresh treatment over residue is what makes floors look grey again within weeks.
Water and power are the two site requirements. We need one working socket within reach of a lead and a water point; everything else, including masking material and waste bags, comes with the crew.
Why clients book us
- Test patch shown before the full job
- One team for sanding, grinding and polishing
- 12 years of marble work in Delhi NCR
- Wet method keeps dust out of the house
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Tile Restoration - common questions
Does wet sanding remove a lot of stone?
It removes the coating and the damaged top layer only. Deep lippage needs grinding first, which we identify during inspection.
How messy is it?
We mask surfaces and vacuum slurry as we work, then wash the area before handover. Your furniture and curtains do not end up coated in dust.
Can it be done room by room?
Yes. Most clients do one or two rooms at a time, and dry paths are kept so the house stays usable.
Why wet sanding instead of dry?
Because dust control matters in occupied homes. Water carries the residue away and keeps the surface cool, which protects the stone from heat marks.
What should I check before paying?
That every surface you were quoted for has been finished, that edges and corners are not dull, that joints are clean and that the waste has been removed. Walk the floor with the crew still present, not after they leave.
Do you provide a written scope?
Yes. Surface by surface, with rate and scope, plus any optional items listed separately. Nothing is added after the work starts unless you approve a change.
Is a test patch really necessary?
It is the cheapest insurance on the job. One tile or a corner shows you the real result before you commit the whole floor.