Marble Polishing With Nano Marble Polishing with Nano Coating in Delhi NCR
A nano coating is an invisible protective layer applied after polishing. It does not change the look of the stone, but it slows down how quickly tea, oil, hard water and coloured liquids soak in, which is what normally ruins a polished floor. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Polish condition check before coating
- Diamond polishing first, because coating cannot hide scratches
- Surface cleaned of residue and moisture
- Nano coating applied evenly in sections
At a glance
- Akemi nano
- Invisible protection
- 12-24 months
A real before and after photo is added here for the strongest result.
What is included in marble polishing with nano coating epoxy and s
- Polish condition check before coating
- Diamond polishing first, because coating cannot hide scratches
- Surface cleaned of residue and moisture
- Nano coating applied evenly in sections
- Curing time allowed before use
- Edge and joint treatment by hand
- Care instructions for cleaning without stripping the coat
- Re-application schedule explained
What each surface needs
| Area | Why coat it | Expected life |
|---|---|---|
| Kitchens and dining | Oil, turmeric, tea and wine spills | 12-24 months |
| Washbasins and wet areas | Hard water film and watermark rings | 12-18 months |
| Entry and lobby | Dust, grit and shoe marks | 12-24 months |
| Office and retail floors | Cleaning chemicals and trolley traffic | 12-18 months |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection to confirm the floor is polish-ready (free)
- Diamond polishing to remove scratches and dullness
- Surface cleaned and dried completely
- Nano coating applied and buffed evenly
- Curing and handover with cleaning guidance
Marble Polishing With Nano Coating Epoxy And S rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Polish plus nano coating | Rs 15-25 per sq ft | Standard homes |
| Polish plus coating on heavy wear | Rs 25-35 per sq ft | Lippage, stains, patchiness |
| Nano coating only | Quoted after inspection | Floor must already be polished and sound |
| Re-application | Quoted after inspection | Every 12-24 months |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Booking, access and scheduling
- Inspection booked within 24-48 hours; the written quote follows the same visit
- Work usually starts within a week of approval, sooner if you are flexible on dates
- Society gate, lift, parking and working-hour rules arranged before the crew arrives
- Water point, power and work area confirmed at booking so setup takes minutes
- Occupied premises are done room by room or after hours, at no surprise premium
| Job size | Typical duration |
|---|---|
| Bathroom or kitchen | Same day |
| Single room | One working day |
| Full 2-3 BHK | One to two days |
| Lobby or commercial floor | Phased, often overnight |
After-care guidance is handed over in writing: which cleaner to use, how to mop, and what to avoid during the first week. Most repeat problems trace back to cleaning products rather than the work itself.
Every job ends with a walkthrough. You see the gloss reading, the treated patches and the joints before the crew packs up, and the same crew owns any correction needed later.
Why clients book us
- Coating applied only after polishing, never as a shortcut
- pH-neutral cleaning advice so the coat is not stripped
- Visible result checked with you before handover
- Clear re-application schedule instead of vague promises
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Polishing With Nano Coating Epoxy And S - common questions
Does it change the appearance?
No. It is transparent and leaves the original colour and veining untouched, unlike a lacquer or film coating.
Can it be applied without polishing first?
It can, but it is a waste of money. Coating over scratches and dull patches locks them in, so we polish first or decline the job.
How long does it last?
Typically 12-24 months depending on traffic and cleaning products. Two applications a year in commercial spaces is normal.
Does it stop the floor from being slippery?
It does not increase slip resistance. For bathrooms and staircases we recommend an anti-skid treatment alongside or instead.
Will nano coating make my marble stain-proof?
No, and nobody should promise that. It slows absorption so you have time to wipe a spill. Leaving lemon juice or oil on the surface for hours can still mark the stone.
How far in advance should I book?
A week is comfortable. During festival and wedding season, two weeks is safer because crews are booked out for hotel and banquet work.
What access do you need?
A water point, a working power socket, and a clear route for the machines. Society permission for lift use is helpful for upper floors.
Can the job be split across weekends?
Yes. Many clients do one or two rooms each weekend. We keep the same rate per sq ft and you are not billed twice for travel within the same batch.