Marble Polishing Stone Floor Cleaning and Polishing in Gurgaon 2
Cleaning and polishing are two different jobs. A floor can be clean and still look grey because the sheen is gone, and it can be shiny and still be dirty if residue has been sealed in. We do both, in the right order. Gurgaon societies are dominated by imported Italian marble and vitrified tile, often in the same apartment. Tower rules on lift use and working hours are checked before we book the crew.
- Free inspection with a residue test on a hidden patch
- Masking and protection of adjacent surfaces
- Residue and soap film stripping with pH-neutral products
- Deep cleaning of joints and edges
At a glance
- pH-neutral products
- Residue stripping
- Polishing included
A real before and after photo is added here for the strongest result.
What is included in marble polishing
- Residue and soap film stripping with pH-neutral products
- Deep cleaning of joints and edges
- Polishing to restore the surface sheen
- Stain treatment for oil, rust and hard water
- Sealing or coating option
- Wash-down and handover
- Free inspection with a residue test on a hidden patch
- Masking and protection of adjacent surfaces
What each surface needs
| Problem | Cause | Fix |
|---|---|---|
| Grey haze after mopping | Cleaning residue and soap film | Strip, then polish |
| White patches | Hard water and acid contact | pH-neutral clean, fine polish |
| Dark spots and rings | Oil, rust or planters | Poultice, then polish |
| Patchy gloss | Uneven earlier polishing | Grind and polish to one level |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and residue test (free)
- Masking and preparation
- Stripping of residue and old polish
- Polishing to restore the sheen
- Sealing option and handover
Marble Polishing rates in Gurgaon
| Work | Guide band | Notes |
|---|---|---|
| Deep cleaning and stripping | Rs 5-15 per sq ft | Residue and film removal |
| Cleaning plus polishing | Rs 15-25 per sq ft | Dull but sound floors |
| Deep clean with grinding | Rs 25-35 per sq ft | Heavy wear and stains |
| Sealing or coating | Quoted after inspection | Wet and high-traffic areas |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Serving Gurgaon 2
Marble Polishing in Gurgaon 2 is handled on scheduled routes by our Gurgaon team, so travel is planned rather than added as a surprise.
- Site inspection booked within 24-48 hours for Gurgaon 2 addresses
- Society gate, lift and parking permissions coordinated before the crew arrives
- Water point, power and work area confirmed at the time of booking
- Slurry and waste removed the same day, never dumped in the society bins
- Before-and-after photographs of your own Gurgaon 2 job handed over for your records
Questions we are asked most
How is the rate decided?
Surface type, damage depth, total area and access, confirmed by measurement during a free inspection. You get one written figure per surface, not a lump sum.
How long does the floor take to be usable?
Most jobs are walkable the same evening. Coated floors need a few hours longer before furniture goes back, and we tell you the exact window at handover.
Can you work while we are living at home?
Yes. Work is done room by room, furniture edges masked and dry walking paths left overnight.
What if we are not satisfied?
Walk the floor with the crew before they leave. Anything you flag is corrected on the spot or scheduled, and that is why we insist on the handover walkthrough.
Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.
Old polish, wax and cleaning residue are stripped before any new finish goes on. Layering a fresh treatment over residue is what makes floors look grey again within weeks.
Why clients book us
- Residue stripped before sealing so nothing is trapped
- Test patch shown before full commitment
- One team for cleaning, polishing and sealing
- 12 years of stone cleaning and polishing in Delhi NCR
Serving Gurgaon and nearby areas
Our Badshahpur (Sector 48) office is minutes from Golf Course Road, Sohna Road and the Dwarka Expressway belt. Gurgaon societies are dominated by imported Italian marble and vitrified tile, often in the same apartment. Tower rules on lift use and working hours are checked before we book the crew. Inspections are booked within 24-48 hours and most jobs take usually one working day per apartment. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Polishing - common questions
Why does my floor look dull right after mopping?
Because you are looking at cleaning residue and soap film, not the stone. Mopping with the wrong product keeps adding a layer. Stripping it and polishing the surface is what brings the colour back.
Is deep cleaning enough without polishing?
It restores cleanliness but not sheen. If the surface has micro-scratches and worn gloss, cleaning alone will still look grey, and polishing is needed.
Which cleaner should we use afterwards?
A pH-neutral stone cleaner with clean water. Acidic and abrasive products damage polished stone surfaces within a few uses.
How often should stone floors be deep cleaned?
Every six to twelve months for homes and every three to six months in commercial spaces, depending on footfall and cleaning method.
Do you cover Gurgaon 2?
Yes. Gurgaon 2 is on our regular route with the Gurgaon team, and inspections there are usually booked within 24-48 hours. For larger areas we schedule a fixed route day so travel cost is shared.
How soon can work start in Gurgaon 2?
Inspection first, then scheduling. Most Gurgaon 2 jobs begin within a week of approval, and single-room works are often earlier if you are flexible on the date.
Do you bring your own machines and products?
Yes. Machines, pads, compounds and masking material all come with the crew. You only need to provide a water point and a working power socket.
How do you handle payment?
The package is confirmed in writing first. Advance for material applies on large jobs, and the balance is settled after the walkthrough, not before.
Is there a warranty?
Workmanship terms are confirmed in writing on the quotation, so you know exactly what is covered and for how long before the job starts.