Marble Floor Polishing in Topkhana
Marble does not fade evenly. Doorways, kitchen entries and stair landings wear first, which is why floors start looking patchy. We polish the whole surface back to one uniform gloss so no room looks newer than the rest. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit.
- Damage mapping and crack depth check
- Joints cleaned so epoxy bonds properly
- Pigment matched against the stone shade
- Thin epoxy for hairline joints, gel for deep cracks
At a glance
- Diamond polishing
- Stain removal
- Rate locked in writing
A real before and after photo is added here for the strongest result.
What is included in marble floor polishing
- Pigment matched against the stone shade
- Thin epoxy for hairline joints, gel for deep cracks
- Full cure before shaping and polishing
- Edges and corners hand finished
- Polish matched to the surrounding floor
- Optional sealing over repaired areas
- Damage mapping and crack depth check
- Joints cleaned so epoxy bonds properly
What each surface needs
| Damage | Method | Result |
|---|---|---|
| Open slab joints | Thin epoxy run in and levelled | Closed joint, no dirt trap |
| Chipped edges and corners | Epoxy built up and shaped | Edge rebuilt to profile |
| Cracked stair nosing | Deep tinted gel fill | Safe to walk on |
| Dull patchy gloss | Epoxy polish coat after diamond polishing | Bright even finish |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection to check whether the crack is cosmetic or structural (free)
- Cleaning of joints and cracks
- Tinted epoxy applied and left to cure
- Fill shaped flush and polished
- Handover with photos and advice on furniture that caused it
Marble Floor Polishing rates in Kolkata
| Work | Pricing | Notes |
|---|---|---|
| Joint and crack filling | Per running ft | Colour matched |
| Chip and edge rebuilding | Per repair | Shaped and polished |
| Epoxy polish over a floor | Rs 15-25 per sq ft | After diamond polishing |
| Deep epoxy sequence with crystallisation | Rs 25-35 per sq ft | Heavy patchiness |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
How to judge a good job instead of a good sales pitch
| Check | What good looks like | Warning sign |
|---|---|---|
| Test patch | Shown on a hidden area first | Skipped or refused |
| Evenness | Same gloss across the room | Bright at the door, dull corners |
| Joints | Clean and level | Dust trapped in open joints |
| Handover | Walkthrough and a care note | Payment taken, crew leaves |
Serving Topkhana
Marble Floor Polishing in Topkhana is handled on scheduled routes by our Kolkata team, so travel is planned rather than added as a surprise.
- Site inspection booked within 24-48 hours for Topkhana addresses
- Society gate, lift and parking permissions coordinated before the crew arrives
- Water point, power and work area confirmed at the time of booking
- Slurry and waste removed the same day, never dumped in the society bins
- Before-and-after photographs of your own Topkhana job handed over for your records
Tiles or marble: what each one needs
| Tiles (vitrified, ceramic) | Marble | |
|---|---|---|
| What dulls | Surface residue and micro-scratches | Worn polished layer, etching |
| Restoring it | Deep clean, surface refine | Grinding and diamond polishing |
| Staining | Grout lines first | Stone surface and joints |
| Slip risk | High on glossy tile when wet | High on mirror-polished stone |
| Best finish for wet areas | Clean plus anti-skid | Satin plus anti-skid |
In most homes both are present in the same flat, which is why we quote surface by surface instead of giving one blended rate.
Team composition is consistent: a supervisor plus two machine operators on standard jobs, with additional hands for staircases, multiple floors or tight access. The same supervisor stays with the job start to finish.
Dust and water control is planned before we start: masking on skirting and fittings, wet working instead of dry, and slurry vacuumed as the machine moves rather than left to dry in corners.
Timing is agreed before the crew arrives: arrival window, the room sequence and the handover time are confirmed in writing, so nobody is waiting around or guessing when the floor will be free.
Why clients book us
- Epoxy 1005 and Akemi 5010 gel in stock
- Pigment matched to the stone, never a grey patch
- Full cure before polishing, because rushing is why fills sink
- Repairs photographed before and after
Serving Kolkata and nearby areas
Kolkata jobs are scheduled as a fixed visit batch so the crew and machines travel together and travel cost is not loaded onto your rate. Kolkata buildings are older and often mix marble, Kota and mosaic in the same flat, with high humidity and monsoon damp that dulls floors faster than in Delhi. Salt-laden air near the river also leaves a film that looks like stone wear but is surface deposit. Inspections are booked within 24-48 hours and most jobs take 1-2 days per flat. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Floor Polishing - common questions
Will the repaired crack show?
With a matched tint and a flush polish it blends into the veining and is hard to find from standing height. A faint line can remain under close direct light, which is normal.
How long does an epoxy repair last?
Years under normal traffic, provided the surrounding slab is sound. If a slab is hollow or still moving, the underlying problem must be fixed first and we check that during inspection.
Is epoxy polishing the same as diamond polishing?
No. Diamond polishing refines the stone with abrasives. Epoxy polishing adds a brightening and protective treatment and works best on top of a properly polished floor.
Do we have to leave the room while it cures?
Only the work area needs to stay clear. Small fills cure in a few hours; larger repairs are left overnight before shaping and polishing.
What makes one job better than another?
The pad sequence and the honesty of the scope. Anyone can brighten a floor with wax and it fades in weeks. A proper sequence costs more time and holds for years.
Do you share before and after photos?
Yes. We photograph the test patch and the finished floor so you can compare, and keep them for warranty reference.
Do you cover Topkhana?
Yes. Topkhana is on our regular route with the Kolkata team, and inspections there are usually booked within 24-48 hours. For larger areas we schedule a fixed route day so travel cost is shared.
How soon can work start in Topkhana?
Inspection first, then scheduling. Most Topkhana jobs begin within a week of approval, and single-room works are often earlier if you are flexible on the date.
Can tiles be polished like marble?
Tiles are refined and cleaned, not ground like stone. Polishing a vitrified tile past its factory finish wears the surface, so we clean and seal instead, or polish only where the tile type allows it.
Which is better for a bathroom floor?
Neither should be mirror-glossy when wet. Tile with anti-skid treatment, or honed stone with anti-skid, is the safer and more practical choice.
Do floors with both need separate visits?
No. One crew handles tiles, grout and stone in the same visit, which also avoids the joint line between two trades becoming anyone's excuse.