Marble Floor Polishing in Delhi
If your marble has lost its gloss, shows grey walking lanes or looks hazy after mopping, the finish has worn through to the stone. We restore it with a graded diamond sequence and lock the shine in, so the floor holds its look instead of going flat again in a few weeks. Delhi floors take a beating from dust, metro-era construction grit and hard water. Makrana, Katni and Kota dominate older colonies, while newer builder floors use imported marble.
- Free on-site gloss and scratch check
- Masking of skirting, walls and furniture edges
- Diamond grinding where scratches or lippage need it
- Progressive honing and fine polishing passes
At a glance
- Diamond polishing
- Stain removal
- Rate locked in writing
A real before and after photo is added here for the strongest result.
What is included in top marble floor polishing
- Free on-site gloss and scratch check
- Masking of skirting, walls and furniture edges
- Diamond grinding where scratches or lippage need it
- Progressive honing and fine polishing passes
- Marble-safe stain and film removal (no acid)
- Edge, corner and staircase hand polishing
- Grout-line clean-up and hairline crack fill
- Optional silicate, crystallisation or nano finish
- Full wash-down and walkthrough with you
- After-care guidance for the first week
What each surface needs
| Stone | What we do | Finish you get |
|---|---|---|
| Italian marble (Statuario, Carrara) | Fine honing and polishing, acid-free | High mirror gloss |
| Makrana and Indian marble | Grinding, stain removal, silicate option | Deep satin to gloss |
| Kota and Katni stone | Level grinding, densifier, buff | Even matte to gloss |
| Terrazzo and mosaic | Ground back to aggregate, then polished | Medium to high gloss |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and gloss reading (free, 20 minutes)
- Masking and furniture shifting (30 minutes)
- Grinding and honing, 25-40 minutes per 100 sq ft
- Polishing and optional sealing, 15-25 minutes per 100 sq ft
- Wash-down, gloss check with you and after-care note
Top Marble Floor Polishing rates in Delhi
| Work | Guide band | Typical case |
|---|---|---|
| Maintenance buff | Rs 5-15 per sq ft | Sound floor, light dulling |
| Diamond polishing | Rs 15-25 per sq ft | Scratch lanes, worn gloss |
| Deep diamond plus crystallisation | Rs 25-35 per sq ft | Heavy wear, stains, lippage |
| Silicate or nano coating | Quoted after inspection | Wet areas, high traffic |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
How to judge a good job instead of a good sales pitch
| Check | What good looks like | Warning sign |
|---|---|---|
| Test patch | Shown on a hidden area first | Skipped or refused |
| Evenness | Same gloss across the room | Bright at the door, dull corners |
| Joints | Clean and level | Dust trapped in open joints |
| Handover | Walkthrough and a care note | Payment taken, crew leaves |
Why clients book us
- 12 years of marble and stone work across Delhi NCR
- 600+ floor projects completed every year
- Klindex and Taski machines with fresh diamond segments
- Quote fixed in writing before the first pad runs
- Silicate Sil200 and Sil800, Epoxy 1005 and Akemi nano in stock
Serving Delhi and nearby areas
The Delhi team operates out of Badarpur, close to the Mathura Road corridor and South Delhi. Delhi floors take a beating from dust, metro-era construction grit and hard water. Makrana, Katni and Kota dominate older colonies, while newer builder floors use imported marble. Inspections are booked within 24-48 hours and most flats are finished the same day. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Top Marble Floor Polishing - common questions
How much does marble floor polishing cost in Delhi?
Guide bands run Rs 5-15 per sq ft for a maintenance buff, Rs 15-25 for diamond polishing and Rs 25-35 for deep diamond work with crystallisation. Stone type, scratch depth, area and access decide your final number, which we confirm in writing after the free inspection.
How long does the job take?
A two-person crew finishes about 800-1,000 sq ft in a working day. Grinding plus polishing on the same area adds roughly half a day. The floor is walkable the same evening.
Will polishing thin my marble?
Polishing removes microns, not millimetres. We test a patch first and step through grits gradually, so only the worn surface layer is corrected and the slab keeps its thickness.
Do you use acid on marble?
Never. Marble is calcium-based, so acid etches it. We clean with pH-neutral products and treat oil, rust and paint stains with poultice instead.
Can we stay in the house during the work?
Yes. Polishing is done wet so dust stays low, furniture edges are masked and we leave dry walking paths overnight.
What makes one job better than another?
The pad sequence and the honesty of the scope. Anyone can brighten a floor with wax and it fades in weeks. A proper sequence costs more time and holds for years.
Do you share before and after photos?
Yes. We photograph the test patch and the finished floor so you can compare, and keep them for warranty reference.