Marble Countertops Re in Delhi NCR
A dull patch in front of the sink makes an entire kitchen look tired. We clean, refine and re-polish the working area and blend it into the rest of the slab. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Photographed damage map and gloss reading
- Test patch on a hidden area before full approval
- Acid-proof masking of skirting, walls and fittings
- Sequential diamond passes at controlled speed
At a glance
- 12 years experience
- 600+ projects a year
- Written rates
A real before and after photo is added here for the strongest result.
What is included in marble countertops re polishing
- Sequential diamond passes at controlled speed
- Vein-safe polishing and hand-finished edges
- pH-neutral deep clean before finishing
- Sealer, silicate or nano coating on request
- Written after-care rules for the first month
- Photographed damage map and gloss reading
- Test patch on a hidden area before full approval
- Acid-proof masking of skirting, walls and fittings
What each surface needs
| Marble | Character | What to watch for |
|---|---|---|
| Statuario | White with bold grey veining | Etches fast, needs prompt spill control |
| Carrara | Soft white, subtle grey | Softer stone, dulls quickly in entries |
| Calacatta | Warm white with gold veins | Needs gentle pads to avoid vein bleeding |
| Perlatino and Botticino | Warm beige with fine veins | Yellowing if filled slabs are over-polished |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Identify the marble type and check for resin filling (free)
- Masking with acid-proof covering
- Diamond passes at controlled speed, 30-45 minutes per 100 sq ft
- Polish to the agreed gloss, then seal or coat if required
- Before and after comparison plus a list of products never to use
Marble Countertops Re Polishing rates in Delhi NCR
| Work | Guide band | Typical case |
|---|---|---|
| Maintenance polish | Rs 5-15 per sq ft | Light dulling, sound floor |
| Diamond polish to restore gloss | Rs 15-25 per sq ft | Traffic lanes, mop haze |
| Deep polish with crystallisation | Rs 25-35 per sq ft | Heavy wear, etching, patchiness |
| Sealing or nano coating | Quoted after inspection | Kitchens, entries, high traffic |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
How to judge a good job instead of a good sales pitch
| Check | What good looks like | Warning sign |
|---|---|---|
| Test patch | Shown on a hidden area first | Skipped or refused |
| Evenness | Same gloss across the room | Bright at the door, dull corners |
| Joints | Clean and level | Dust trapped in open joints |
| Handover | Walkthrough and a care note | Payment taken, crew leaves |
Buff or full polish? A straight answer
| Condition of the floor | Correct job | Why |
|---|---|---|
| Dull but even, no scratches | Buff only | Surface is sound, only the sheen is lost |
| Light scratches and lane wear | Diamond polish | Surface layer needs refining |
| Visible lippage or deep scratches | Grinding plus polish | Buffing cannot level stone |
| Wax or polish residue build-up | Strip, then polish | New finish will not bond over residue |
Buffing is the cheaper option and we will tell you when it is enough. Selling a full polish for a floor that only needed a buff is how a contractor gets a bad name.
Quality is checked twice: once mid-job, when the first section is finished and you can see the achievable gloss, and once at handover when the whole surface should read evenly under daylight and under your own lighting.
Access is confirmed before the visit: parking, lift use, gate entry, working-hour restrictions and any society paperwork. Sorting this in advance is what stops a scheduled job from becoming a wasted trip.
Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.
Why clients book us
- Acid-free discipline: our crews never reach for the acid bottle on calcite stone
- Lower heat and pressure on resin-filled slabs to prevent yellowing
- One gloss standard across the whole floor, no patch looks newer
- Silicate, epoxy and Akemi nano products in stock
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Countertops Re Polishing - common questions
Why does Italian marble dull faster than Indian marble?
It is usually the cleaning, not the stone. White imported marbles are calcium-based, so acidic cleaners and lemon juice etch the surface and leave white patches within days. A pH-neutral cleaner and clean-water mopping solves most of it.
Will polishing change the pattern?
No. Diamond polishing removes the damaged top layer; it does not bleach or alter the veining. On filled slabs we work at lower speed specifically to avoid yellowing.
Can yellowed Italian marble be corrected?
Polish residue and hard-water film lift during diamond polishing. Yellowing inside a filled slab is internal and cannot be polished out, so we test a patch and tell you the realistic outcome first.
How often does it need polishing?
Homes every 18-24 months with neutral cleaning. Lobbies, showrooms and entries every 8-12 months, longer with a sealer or nano coating.
Is a sealer worth it?
Yes in working areas. It slows absorption of oil, tea and coloured liquids, which buys time to wipe a spill, and needs refreshing every 12-24 months.
What makes one job better than another?
The pad sequence and the honesty of the scope. Anyone can brighten a floor with wax and it fades in weeks. A proper sequence costs more time and holds for years.
Do you share before and after photos?
Yes. We photograph the test patch and the finished floor so you can compare, and keep them for warranty reference.
How do I know if buffing is enough?
If the floor is evenly dull with no visible scratch pattern, a buff usually restores it. If you can see lanes, scratches or a step between slabs, it needs polishing or grinding, and we show you why on a test patch.
Is buffing a waste of money then?
Not at all. It is the correct maintenance step for a sound floor and costs a fraction of a full job. It becomes a waste only when the surface damage needs something deeper.
Can you do a test patch first?
Yes, on every job. One tile or a corner, so you judge the actual result before committing to the whole floor.