Marble Countertop Refinishing in Delhi NCR
Kitchen platforms, vanity tops and table tops take concentrated wear in small areas: knife marks near the chopping zone, ring stains under bottles and acid etch near the sink. Local polishing fixes those patches without redoing the whole slab. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Gloss reading and patchiness mapping
- Diamond polishing to prepare the surface
- Crystallisation applied in sections with a steel-wool pad under machine
- Even working to avoid swirl marks
At a glance
- 12 years experience
- 600+ projects a year
- Written rates
A real before and after photo is added here for the strongest result.
What is included in marble countertop refinishing
- Crystallisation applied in sections with a steel-wool pad under machine
- Even working to avoid swirl marks
- Second pass on high-traffic routes
- Residue buffed off and floor washed
- Walkway protection until dry
- Gloss check with you
- Gloss reading and patchiness mapping
- Diamond polishing to prepare the surface
What each surface needs
| Area | Why crystallise | Expected life |
|---|---|---|
| Lobby and reception | Constant footfall and trolley traffic | 12-24 months |
| Showroom and retail | Scuffing and display lighting | 12-18 months |
| Staircases | Edge wear and heel marks | 12-18 months |
| Homes with pets | Claw marks and repeated mopping | 18-24 months |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and gloss reading (free)
- Diamond polishing to level the surface
- Crystallisation worked in section by section
- Second pass on heavy-traffic lanes
- Residue removal, wash-down and handover
Marble Countertop Refinishing rates in Delhi NCR
| Work | Guide band | Notes |
|---|---|---|
| Polish plus light crystallisation | Rs 15-25 per sq ft | Homes, moderate traffic |
| Full crystallisation with deep polish | Rs 25-35 per sq ft | Lobbies, showrooms, heavy traffic |
| Crystallisation only | Quoted after inspection | Floor must already be sound |
| Repeat maintenance | Quoted after inspection | 12-24 months |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
How to judge a good job instead of a good sales pitch
| Check | What good looks like | Warning sign |
|---|---|---|
| Test patch | Shown on a hidden area first | Skipped or refused |
| Evenness | Same gloss across the room | Bright at the door, dull corners |
| Joints | Clean and level | Dust trapped in open joints |
| Handover | Walkthrough and a care note | Payment taken, crew leaves |
Night, weekend and occupied-premises work
- Evening, night and Sunday slots so trading hours and office shifts are untouched
- Machine noise managed around residents, guests and neighbours, with work sequenced floor by floor
- Zones handed back ready for use before the next shift or opening time
- Lighting provided where a site has no working lights after hours
- Supervisor present throughout, with one point of contact for the site manager
Working after hours costs a little more in crew arrangements, and we tell you that upfront rather than burying it in the rate.
Timing is agreed before the crew arrives: arrival window, the room sequence and the handover time are confirmed in writing, so nobody is waiting around or guessing when the floor will be free.
Quality is checked twice: once mid-job, when the first section is finished and you can see the achievable gloss, and once at handover when the whole surface should read evenly under daylight and under your own lighting.
Nothing is hidden behind a shine. Where a surface has damage that polishing cannot correct, we mark it during inspection and put it in writing, so expectations are set before work starts rather than argued over afterwards.
Why clients book us
- Swirl marks removed before handover
- Suitable for marble, terrazzo and most calcite stone
- Honest advice when a floor is too damaged for crystallisation alone
- 12 years of marble finishing in Delhi NCR
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble Countertop Refinishing - common questions
What is the difference between crystallisation and silicate?
Crystallisation builds a harder, glassier surface layer and suits heavy footfall. Silicate gives a wetter, deeper gloss and is gentler on the stone. Many projects use silicate for homes and crystallisation for lobbies.
Will it make the floor slippery?
A crystallised surface is smooth and reflective, so wet areas need care. In bathrooms and on stairs we recommend a satin finish with anti-skid treatment instead.
How long does it last?
Twelve to twenty-four months depending on traffic. Lobbies are usually re-treated annually, homes every two years.
Can it be done on a scratched floor?
It should not be. Crystallising a scratched surface sets the scratches in. We polish first, and if the damage is deep we recommend grinding.
What makes one job better than another?
The pad sequence and the honesty of the scope. Anyone can brighten a floor with wax and it fades in weeks. A proper sequence costs more time and holds for years.
Do you share before and after photos?
Yes. We photograph the test patch and the finished floor so you can compare, and keep them for warranty reference.
Is there a premium for night work?
Sometimes, and we say so before booking. It covers crew scheduling and transport at unsociable hours, not the work itself.
Can you work while our premises stay open?
Yes. Work is phased section by section, with dry paths and signage so customers and staff are never crossing a wet or machine-worked area.
Will the machines disturb neighbours?
Machine noise is unavoidable for short periods. We sequence the noisiest work earlier, and for residential buildings we stay within the society's permitted hours.