Marble And Granite Restoration Granite Polishing in Delhi NCR
Dull granite is normally a surface problem, not a stone problem. Buffing with the right pads and a sealer brings back the depth without the risk that comes from using marble products on granite. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit.
- Free inspection of gloss, stains and joint condition
- Masking of skirting, walls and fittings
- Granite-specific pad sequence for the stone type
- Buffing to bring back depth and clarity
At a glance
- Granite-specific pads
- Buffing
- Sealing option
A real before and after photo is added here for the strongest result.
What is included in marble and granite restoration
- Buffing to bring back depth and clarity
- Stain treatment for oil, rust and hard water
- Joint cleaning between slabs
- Sealing or nano coating on request
- Wash-down and gloss check with you
- Free inspection of gloss, stains and joint condition
- Masking of skirting, walls and fittings
- Granite-specific pad sequence for the stone type
What each surface needs
| Surface | Process | Result |
|---|---|---|
| Dark granite (black, brown) | Fine buff with matched pads | Deep reflective lustre |
| Light granite (grey, speckled) | Polish, then seal | Even satin to gloss |
| Granite kitchen platform | Clean, buff, seal | Stain-resistant working surface |
| Granite staircase and threshold | Edge buff and hand polish | Uniform gloss across edges |
Every surface is tested on a hidden patch before work starts, so you see the result before committing to the whole floor.
How the job runs
- Inspection and gloss reading (free)
- Masking and surface preparation
- Granite pad sequence and buffing
- Stain treatment where required
- Sealing, wash-down and handover
Marble And Granite Restoration rates in Delhi NCR
| Work | Guide band | Typical case |
|---|---|---|
| Granite buffing | Rs 5-15 per sq ft | Sound floor, mild dulling |
| Diamond polishing of granite | Rs 15-25 per sq ft | Scratch lanes, worn gloss |
| Deep restoration | Rs 25-35 per sq ft | Heavy wear, stains |
| Granite sealing or nano coating | Quoted after inspection | Kitchen platforms, staircases |
Rates depend on surface type, damage depth, area and access. The figure is written down before work begins.
Buff or full polish? A straight answer
| Condition of the floor | Correct job | Why |
|---|---|---|
| Dull but even, no scratches | Buff only | Surface is sound, only the sheen is lost |
| Light scratches and lane wear | Diamond polish | Surface layer needs refining |
| Visible lippage or deep scratches | Grinding plus polish | Buffing cannot level stone |
| Wax or polish residue build-up | Strip, then polish | New finish will not bond over residue |
Buffing is the cheaper option and we will tell you when it is enough. Selling a full polish for a floor that only needed a buff is how a contractor gets a bad name.
Where a floor has mixed surfaces, each one gets its own pad sequence and compound. Treating Kota stone and imported marble with the same approach is how floors get patchy.
The written rate is the final amount for the agreed scope. If we open the floor and find something the inspection could not show, we stop and re-quote with you before continuing, not after.
Why clients book us
- 12 years of granite and marble work in Delhi NCR
- Granite-specific pads and compounds, not marble products
- Sealing recommended where spills are frequent
- Samples tested on a hidden corner first
Serving Delhi NCR and nearby areas
Our Badarpur (Mathura Road) and Gurgaon (Badshahpur, Sector 48) teams cover the whole NCR belt. Delhi NCR mixes very old housing stock with new high-rise towers, so a single visit can mean Kota stone in one room and Italian marble in the next. We carry pads for both and quote each surface on its own merit. Inspections are booked within 24-48 hours and most jobs take 1-2 days. Call 86070 01043 or WhatsApp photos of your floor for an indicative rate.
Marble And Granite Restoration - common questions
Can dull granite really be brought back?
Yes if the dullness is surface wear. Buffing with the correct pads restores depth and reflectivity. Stone that has been damaged by acid or heavy abrasion may need grinding first, and we will tell you after seeing it.
Does granite need sealing?
Granite is less porous than marble but still benefits from sealing in kitchens and on staircases where water and oil sit. Sealed surfaces hold their look noticeably longer.
Can acid cleaners be used on granite?
No. Acid dulls the polished surface and can bleach the colour. Use pH-neutral cleaner and dry promptly.
How often should granite be polished?
Homes at 18-24 months, commercial floors at 8-12 months depending on traffic and cleaning method.
How do I know if buffing is enough?
If the floor is evenly dull with no visible scratch pattern, a buff usually restores it. If you can see lanes, scratches or a step between slabs, it needs polishing or grinding, and we show you why on a test patch.
Is buffing a waste of money then?
Not at all. It is the correct maintenance step for a sound floor and costs a fraction of a full job. It becomes a waste only when the surface damage needs something deeper.
Can you do a test patch first?
Yes, on every job. One tile or a corner, so you judge the actual result before committing to the whole floor.